Tender For Renovation, Furnishing, Electrical Installation, Acp Partition Work, Office Furniture And Allied Works At The Office Of The Chief Engineer, South Zone, Office Of The Superintending Engineer, Rrnmu, Midnapore And Office Of The Executive Eng
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Aug 2026
1 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation, Furnishing, Electrical Installation, Acp Partition Work, Office Furniture And Allied Works At The Office Of The Chief Engineer, South Zone, Office Of The Superintending Engineer, Rrnmu, Midnapore And Office Of The Executive Engineer, Wbsrda, Paschim Medinipur Division-Ii.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof.b)Extra rate for each addl.Floor over the rate of ground floor |
| 2 | Supplying solid flush type doors of deluxe decorative (both side) quality, conformingtoI:S2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and theen tire frame fitted with7.5mm wide batten splaces bothways in order to made the doorof solid core and internal lipping with teak, mahogony or rosewood approved decorative veneer susingphenol form aldehydeasglueetc.complete, includingfitting, fixing the shutters inpositionbut excluding the cost of hinges andother fittings in ground floor:(a) 35mm thick shutters (single leaf |
| 3 | Woodwork in door andwindow frame fitted and fixed in position completeincluding a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.Sclamps.(Thequantumshouldbe correted upto three decimals).local sal |
| 4 | Supplying,fitting and fixing M.S.clamps for door and window frame made off lat bentbar,end bifurcated with necessary screws etc.by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(a) 40mm X 6mm, 250mm Length |
| 5 | ii)Brass hasp bolt of approved quality fitted and fixed complete(oxidised)with 16mm dia rod with centre bolt and round fitting.(b) 250mm long |
| 6 | Anodised aliminiumD-type handle of approved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 230/72) fittedand fixed complete(iii) 100 mm grip x 12 mm dia rod. |
| 7 | (a)Supplying'Godrej'mortice lock chromium plated with latc handkeys 4levers, including fitting and fixing complete |
| 8 | (ii) Door stopper (Anodised aluminium |
| 9 | (iii) Steel body foot-door holder. |
| 10 | Plaster (to wall , floor, ceiling etc.) with sand and cement sand mortar including rounding off or champhering corner as directed and raking out joints or roughening of concrete surface including throating nosing and drip course where necessary…in allFloor 20 mm thick plaster in cement sand mortar (1:4) |
| 11 | Applying Exteriorgrade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as pe rmanufacturer's specification and as per directiontwo coat |
| 12 | Priming one coat on timberor plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc.door frame |
| 13 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(iv) Two coats (with any shade except white |
| 14 | Supplying fitting and fixing best quality indian make mirror 5.5mm thk with silvering as per ISI specification size-550x400mm |
| 15 | Supplying band installation Door & window curtain premium qualitya) Door curtain size -4ftx 7ft |
| 16 | Supplying band installation Door & window curtain premium qualityb) 'Window curtain size -4ftx 5 ft |
| 17 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed n the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)page No-250, item-27(b)(b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) |
| 18 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).i) Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both endsof vertical member restrained but panels within 0.9 sq.m.)i) Top , bottom & side member. |
| 19 | ii) Intermediate member. |
| 20 | k) Movable door shutter.i) Door frame. (Top & sides). |
| 21 | ii) Shutter :Bottom rail. |
| 22 | ii) Shutter :Lock rail |
| 23 | Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge.i) 150 mm. |
| 24 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (v) 125 mm grip x 12 mm dia rod. |
| 25 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987i) 4mm thick clear glass. |
| 26 | (ii) Door stopper (Anodised aluminium) |
| 27 | Supplying and Drawing 1.1 KV single core stranded ‘FR’ PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre-laid polythene pipe and by the pre-laid GI fish wire and making necessary connection.a) 2×22/0.3 (1.5 sqmm) + 1×22/0.3 (1.5 sqmm) as ECC |
| 28 | Supplying and Drawing 1.1 KV single core stranded ‘FR’ PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre-laid polythene pipe and by the pre-laid GI fish wire and making necessary connection.b) 2×36/0.3 (2.5 sqmm) + 1×22/0.3 (1.5 sqmm) as ECC |
| 29 | Supplying and Drawing 1.1 KV single core stranded ‘FR’ PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre-laid polythene pipe and by the pre-laid GI fish wire and making necessary connection.c) 2×56/0.3 (4 sqmm) + 1×36/0.3 (2.5 sqmm) as ECC |
| 30 | Supplying and Drawing 1.1 KV single core stranded ‘FR’ PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre-laid polythene pipe and by the pre-laid GI fish wire and making necessary connection.d) 2×84/0.3 (6 sqmm) + 1×56/0.3 (4 sqmm) as ECC |
| 31 | Supply of Ac 1.5 Ton ( brand Voltas, carrier , Bluestar) |
| 32 | AC Installation Charge |
| 33 | AC to out door connection Copper pipe |
| 34 | AC to out door connection Wraping Tape |
| 35 | AC to out door connection 4 core wire |
| 36 | Supply and delivery of wall fan 16\\" sweep metal blade ( Crompton greaves, Orient, Havells) |
| 37 | Fixing only cabin fan on wall/ ceiling by S&F rag bolts, nuts, washer ….. |
| 38 | Supply and delivery of exhust fan 12\\" |
| 39 | Supply and delivery of single 4ft Led tube light fitting incl. 4ft led tube complete with all accessories ( Philips, Crompton) or equivallent of havells |
| 40 | Supply and fitting & fixing of 15 watt Led panel typeLuminiares along with all accessories complete as required ( crompton or equivallent of havells, philips etc |
| 41 | Fixing on wall with necy .. Bolts & nuts (6mm dia x62 mm long ) 30cm Exhust fan (12\\") |
| 42 | Supplying & Drawing LAN cable (cat-6)( brand approved by Eic) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall |
| 43 | Ply wood shelf work 20mm thkness 400 mm width |
| 44 | supplying of MS Padal Chair |
| 45 | Supplying of MS Pad chair |
| 46 | Supplying of MS Lid Visitor Chair |
| 47 | Supplying of 4 shelf 66\\"x30\\"x15\\" office Almirah |
| 48 | Supplying of Drawer Table 4ft X 2ft |
| 49 | Supplying of Double Body table 5ft x 3ft |
| 50 | Supplying of Supreme megestry Chair Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender