Tender For Supply, Delivery And Installation Of 700 Mm Single Door Check Valve For Sw4 (132 Kw) P/M Set And 350Mm Sluice Valve (Rising) For Dw3 (45Kw) P/M Set Cdds Main Pumping Station, Bangur Under Eastern Eastern Mechanical Division, Phe Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2026
15 days left
EMD
28500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Delivery And Installation Of 700 Mm Single Door Check Valve For Sw4 (132 Kw) P/M Set And 350Mm Sluice Valve (Rising) For Dw3 (45Kw) P/M Set Cdds Main Pumping Station, Bangur Under Eastern Eastern Mechanical Division, Phe Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of all mechanical joints for taken out the old Sluice valve (350mm) from its original position after disconnection of elctrical connections and sealing the mouth of the delivery pipe with necessary flange arrangements after lowering of water level as per direction of EIC. The cost is including cleaning of debris from pipe lines and carryout that debris from basement of the pump house to the outside by engaging labourers. (Delivery Sluice Valve - 1 no.) |
| 2 | Withdrawing of the above said sluice valve (350mm) on the floor of the pump house by necessary hoisting arrangement and manual labour (skilled & unskilled) as per direction of EIC. |
| 3 | Supply & delivery at site of the following item: |
| 4 | Sluice Valve ( Rising) 350mm |
| 5 | Cast Iron Double flange manually operated Rising spindle Sluice valve of 350 mm dia generally confirming to IS : 14846 having body door/dome/Bonet/gland in graded Cast Iron to (IS 210 Gr. FG 260), Spindle of IS 6603 Gr-12 cr-13 , spindle nut & Seat rings are Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV&VI, Valves are suitable for maximum working pressure of 16 kg/sqcm (seat test) and body tested to 24 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and anifriction device for ease of operation.All the valves should be tested by closed end method. (The materials of the valve lining, body and others should be high anti corrosive as the fluid is Sewerage water) (Make: IVI/JUPITER/Appd. vendor). [N.B.: i) Test certificates and W.C. should be submitted during delivery.] P.N Rating: 16 |
| 6 | MS Companion flanges having dia of 350mm. ANSI B16.5 (The material should be high anti corrosive as the fluid is sewerage water ) |
| 7 | Fitting fixing of newly supplied valves (sl no. 3.01 to 3.02) on the existing suction line after Lowering the valves from the floor of the pump house making necessary hanging arrangement with proper arrangement including necessary reqd. scaffolding with supply of required nuts, bolts, washer and rubber packing as necy. as per direction of EIC. |
| 8 | Single door check valve ( Rising) 700mm |
| 9 | Disconnection of all mechanical joints for taken out the old NRV from its original position and sealing the mount of the pipe with necessary flange arrangements after lowring of water lavel as per direction of EIC. ( Delivery NRV. Valve - 1 no. ) |
| 10 | Withdrawing of the above said single door check valve (700mm) on the floor of the pump house by necessary hoisting arrangement and manual labour (skilled & unskilled) as per direction of EIC. |
| 11 | Cast iron double flanged 700mm dia NRV slanted seat tilting disc single door check valve having body door in graded ductile iron to IS:1865Gr 500/7, Integral Monel 60 seat, stainless steel AISI 410 trunion shaft, valves suitable for a maximum working pressure 16 kg./Sqcm. and body tested to 1.5 times the working pressure i.e. 15 kg./sqcm. Flanges drilled to BS:10 Table D. (P.N. rating-16)................ ........................ .................................................( The materials of the valve lining body and others should be high anti corrosive as the fluid is Sewerange water ) ( Make:- IVI/KBL/APPD. make ) |
| 12 | MS short piece of 700mm. Dia. 750mm long with rubber compression ring and adjustable follower flanged complete assembled unit with galvanized stud and and nuts suitable for maximum working pressure of 16 kg./sqcm. ( The material should be high anti corrosive as the fluid is sewerage water ). |
| 13 | 25mm dia 150mm long S.S. Nut bolt & washer. |
| 14 | 700mm dia EPDM rubber packing ( 12mm thickness ). |
| 15 | Cost of transpotation of chain pulley hoisting arrangement, derrick, tools & trackles from workshop to work site then back to workshop after completion of job. |
| 16 | Fitting fixing of newly supplied valvs ( sl. No.- 5.03-5.06 ) on the existing delivery line after lowering the NRV valvs from the floor of the pump house making necessary hanging arrangement with proper arrangement including necessary reqd. scaffolding with supply of required nuts , bolts , washer and rubber packing as necy. as per direction of E.I.C. |
| 17 | Testing the entire installation upto entire satisfaction of EIC. |
| 18 | Add: GST @ 18% |
| 19 | Add: LWC @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender