Tender For Repairing & Replacement Of Pumping Machinery And Allied Works At P.H.No- High Lift Of Helencha Ground Water Based W/S Scheme Under Emd, Phe Dte.In 24Pgs(N).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2026
3 days left
EMD
41500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing & Replacement Of Pumping Machinery And Allied Works At P.H.No- High Lift Of Helencha Ground Water Based W/S Scheme Under Emd, Phe Dte.In 24Pgs(N).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existing damaged pump-motor, valves , pipes & allied from its existing position all complete. |
| 2 | Supply, delivery and storage at site Lift Type 150 mm Foot valve combined with stainer as per IS : 4038 PN-0.6.(AT SUCTION HEADER )(Make - IVI/Jupiter/ Durga/other approved make) |
| 3 | Supply, delivery and storage at site 125 mm dia double flanged Cast Iron manually operated non-rising spindle sluice valve generally conforming toIS:14846 PN-1.0. (AT SUCTION HEADER )(Make - IVI/Jupiter/ Durga/other approved make) |
| 4 | Supply, delivery and storage at site of CI doble flanged single door swing check 125 mm dia N.R.V as per IS : 5312, Part-I, PN-1.0 . (AT DELIVERY SIDE OF PUMP)(Make - IVI/Jupiter/ Durga/other approved make) |
| 5 | Supply delivery at site of 150 mm dia 5.4 mm thick MS ERW pipe as per relevant IS for suction line. |
| 6 | Supply delivery at site of 125 mm dia 5.4 mm thick MS ERW pipe as per relevant IS for delivery line. |
| 7 | Supply and delivery at site of horizontal split casing Centrifugal pumping machinery having capacity 100 M3/Hr. against a total head of 35 mtrs, coupled with suitable rating squirrel cage TEFC ,IE3 foot mounted motor suitable for 3 Ph, 415V± 10%, 50 Hz ,1500 rpm, continuous rating ( S1 Duty) IP-55 enclosure, with Class ‘F’ insulation suitable for ambient temperature 50ºC ( Temperature rise limited to class “B” ) Make:- Pump-Kirloskar/Mather & Platt/WPIL/Any other approved make. Motor- Crompton Greaves / Kirloskar/ KEC/ABB/Marathon/Any other approved make.[ Test Certificates, Characteristic Curve, Guarantee Certificates should be submitted at the time of delivery] |
| 8 | Installation of above pump-motor set alongwith fitting fixing of valves ,pipes in new orientation on its existing position as in item no.(2 to 7) after making suitable size new foundation of pump-motor by supplying all other necessary materials and proper alignment complete as per direction of E.I.C. |
| 9 | Supply, Delivery and Storage at Site of 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor wall Mounted 415 Volt MCC Panel(30HP) having following specification:-Incommer : i) FP MCCB with O/L , S/C Protection(100Amps,25KA)- 01 no. ii) Digital Ammeter -------------- 01 no. iii) Ammeter Selector Switch---------------- 01 no iv) C.T for Ammeter (100 : 5)-------------- 03 nos. v) Digital Voltmeter---------------- 01 no. |
| 10 | vi) Voltmeter Selector Switch,--------01 no. vii) SP MCB for voltmeter (6 Amp) ------- 03 nos. viii)Phase Indicating Lamp ------- 03 nos. ix Voltage monitoring relay.....01No.x) Voltage trip Indicator.........01Noxi) Surge protection Device----01No. xii)TPN MCB (25A ,10Ka)....01No. xiii) Auto Phase Reversal Correction Device---- 01 no. Xiv) Logic Contactor(4A) ----01 no. |
| 11 | Outgoing: i) MPCB (30-42Amps)------------- 02 no. ii) Motor Protection Relay(0.5-80)A..........02 no. iii) Contractor (40 Amp)-------------------- 04 no. iv) Contractor (32 Amp)-------------------- 02 no. v)Capacitor (10 KVAR)--------------------- 02 no. vi)Contactor for capacitor(25 Amps)----------- 02 no. vii)TP MCB for capacitor (25 Amps) --------------- 02no. |
| 12 | viii)Star-Delta Timer (3-120 Sec) ----------- 02 no. ix)On-Delay timer ....02Nos x) DP MCB (6 Amp) --------- 02 no. xi)ON/OFF/Trip Indicator -------- 06 nos xii) Start/Stop Push Button--------- 04nos. |
| 13 | For Chlorinator: i) TP MCB (16 Amp) -----01no. ii) Over Load Relay (1.0 - 1.4 Amp) ----01 no. iii) Contactor(9Amp) ------01 no. iv) Water Level Controller ------- 01 no. v) ON/OFF/Trip Indicator ------ 03 nos. vi)Start/Stop Push Buttom------- 02 nos. |
| 14 | Installation of the above Panel on as in item no. 9 wall with complete cable connection as per direction supplying all required materials and commissioning the same as per satisfaction of E.I.C |
| 15 | Supply, Delivery at site Single core 1.1 KV Grade 10 Sq. mm. PVC insulated Copper flexible Cable as per Relevant IS.NB: Cable to be supplied as per sire requirement.( Make : GLOSTER/NICCO/Polycab / Havell’s/Mescab/any other approved make) |
| 16 | Laying of cable as in item no. 11 on wall/surface including S&F of MS saddles with earthing attachment in 10 SWG GI(HOT DIP) wire making holes etc. as necessary mending good damages and paint all complete. |
| 17 | Finishing the end of cable by crimping method including supplying of suitable size Al. thimble, tapes, jointing materials & supplying and fixing suitable type compression gland for above cable including supply of brass gland, rubber ring etc. |
| 18 | Supply fitting fixing of 150 mm dia (0 - 7 Kg/cm2) Pressure Gauge with syphon wih stop cock (Approved make) |
| 19 | Supply fitting fixing of 0 - 760 mm range Vaccume gauge with suitable stop cock. |
| 20 | Making priming arrangement for . High lift pump by supplying suitable size 500 litre pvc tank, pipe,sluice valve & all other necessary materials and making gland water removal arrangement by suitable size pvc pipe to carry out the work as per direction of E.I.C. |
| 21 | Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per direction of EIC. |
| 22 | Testing, Commissioning the whole installation upto entire satisfaction of E.I.C. |
| 23 | Add: GST @ 18% |
| 24 | Add: LWC @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender