Tender For Construction Of Community Sanitary Complex ( Community Sanitary Complex )Near Middle School Adjacent To Crpf C Chandsooma Kanispora B Under Sbm _Gi Year 2025-26 Block Baramulla
Tender Value
2.91 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
19 days left
EMD
5820
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Sanitary Complex ( Community Sanitary Complex )Near Middle School Adjacent To Crpf C Chandsooma Kanispora B Under Sbm _Gi Year 2025-26 Block Baramulla
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by manual means in trenches for foundation (Not exceeding 1.5m in width), depth upto 1.5m incl. disposal of excavated earth upto 1m from cutting edge. (All Kinds of Soil) |
| 2 | Providing & Laying of Dry stone soling hand packed and plum in concrete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) upto plinth lvl |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 6 | P/F of mild steel door/window frame and shutter complete job incl. Prime coat and painting |
| 7 | P/F Ms sheet of 1 mm thick for doors incl cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 12 | Dry random rubble masonry with hard stone in foundation and plinth: nallah stones |
| 13 | 12 mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand |
| 14 | Providing and fixing Ist quality ceramic glazed wall/ floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 16 | Carraige of Sand / bajri by MT/HL from source to site of work |
| 17 | Carraige of stones by MT/HL from source to site of work |
| 18 | Carraige of bricks by MT/HL from source to site of work |
| 19 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan)Hindware made with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 20 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, con colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings (Water storage tank) |
| 21 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 20mm OD(SDR-7.4) |
| 22 | P/F 75 mm sewage pipes of class B of approved brand. |
| 23 | P/F 100 mm sewage pipes of class B of approved brand. |
| 24 | P/F P TRAP |
| 25 | P/F S trap |
| 26 | P/F cowel 75 mm |
| 27 | P/F D bend |
| 28 | P/F ball valves 15 mm nominal bore of approved quality |
| 29 | P/F of CP grating 100 mm dia |
| 30 | P/F of CP bib cock 15 mm bore long type |
| 31 | P/F of pipes incl cost of unions,sockets etc 25 mm nominal bore (Supply line 150 rft) of approved brand and manufacture |
| 32 | P/F of information sign board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender