Tender For Construction Of Bathing Ghat At W.No 2 Nadwal Pyt Ghaink Block Bhalwal Under Pri For The Year 2026-27
Tender Value
3.50 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
12 days left
EMD
7000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Bathing Ghat At W.No 2 Nadwal Pyt Ghaink Block Bhalwal Under Pri For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:ALL KINDS OF SOIL |
| 2 | Providing and laying in position of cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregates 40mm nominal size) |
| 3 | Providing and laying in position of cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregates 40mm nominal size) |
| 4 | Supply and placing of stone |
| 5 | Brick work with common burnt clay Modular bricks of class designation 7.5. infoundation and plinth including curing complete in :1:6 mix |
| 6 | Extra for Brick masonry in superstructure above plinth level upto floor V level. |
| 7 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 MIX with 20mm nominal aggregates all complete. |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 10 | PROVIDING AND LAYING 6MM THICK CEMENT PLASTER AT CEILING 1:3 MIX ALL COMPLETE |
| 11 | PROVIDING AND LAYING 12MM THICK CEMENT PLASTER IN 1:6 MIX ALL COMPLETE |
| 12 | PROVIDING AND LAYING 15MM THICK CEMENT PLASTER IN 1:6 MIX ALL COMPLETE |
| 13 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 14 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade: ON NEW WORK |
| 15 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishingthe top smooth and curing complete |
| 16 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes 75mm diameter pipes |
| 17 | Providing and laying vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece |
| 20 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank OF STAR, SYNTEX, VICTREX, TRIPLE LAYER OF WHITE COLOUR OR EQUIVALENT AS APPROVED BY ENGINEER IN CHARGE |
| 22 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 23 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap |
| 24 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 20 mm dia. nominal bore |
| 26 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 19.16.1 100 mm diameter |
| 27 | CENTERING AND SHUTTERING FOUNDATION , FOOTINGS AND BASES OF COLUMNS |
| 28 | CENTERING AND SHUTTERING SUSPENDED FLOOR |
| 29 | CENTERING AND SHUTTERING EDGES OF SLAB |
| 30 | SUPPLY AND FIXING OF INTERNAL AND EXTERNAL ELECTRICFICATION INCL FROM SERVICE MAIN TO THE METER POINT AND THEN TO THE MAIN CIRCUIT BOARD, SWITCHES, SOCKET , SWITCH BOARD, MCB ETC READY TO USE WITH INSTRUCTION OF SITE ENGINEER INCHARGE ALL COMPLETE |
| 31 | Carriage of sand and Agg 10 Km by MT |
| 32 | Carrige of bricks avg 6km by mt |
| 33 | Providing and fixing of sign board of size including writing and painting all complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender