Tender For Repairs To Toilets And Bathrooms Of Otm Accn At 14 Gtc Subathu Under Ge Kasauli.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
16 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kasauli → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Toilets And Bathrooms Of Otm Accn At 14 Gtc Subathu Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 4 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as required complete all as specified & directed by Engineer-in-Charge. |
| 5 | Supply and fix factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tube as per specification complete all as specified and directed by Engr-in-charge. |
| 6 | Supply and fix factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing complete all as specified |
| 7 | Supply and fix butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed, complete all as specified & directed by Engineer-in-Charge. |
| 8 | Supply and fix barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. |
| 9 | Supply and fix barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed. |
| 10 | Supply and fix aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed. |
| 11 | Supply and fix Aluminium locking bolts, anodised, with bolt not less than 10mm dia, 100 mm size as in repairs, complete all as specified & directed. |
| 12 | Material and labour for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed. |
| 13 | Supply and fix Stainless steel 20 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall in repairs,with finols/finnels, connected accessaries, rubber packing, required screws and rawal plugs, complete all as specified and directed. |
| 14 | Supply and fix in repair bib cock long neck with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 15 | Supply and fix in repair 15mm bore pillar tap long neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair complete all as specified and directed. |
| 16 | Supply and fix in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified & directed by Engineer-in-Charge. |
| 17 | Supply and fix in repairs Stop/Angle valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified & directed by Engineer-in-Charge. |
| 18 | Supply and fix brass CP kitchen waste coupling of chromiuim plated with rubber washer of design and pattern suit to existing waste couplings with and including 32mm PVC waste pipe heavy duty as in repair complete all as specified & directed by Engineer-in-Charge. |
| 19 | Supply and fix brass CP WHB/Urinals waste coupling of chromiuim plated with rubber washer of design and pattern suit to existing waste couplings with and including 32mm PVC waste pipe heavy duty as in repair complete all as specified & directed by Engineer-in-Charge. |
| 20 | Supply and fix chromium plated shower rose with or without swivel joints 150mm dia including fixing to steel pipe, fixed as in repairs complete all as specified and directed. |
| 21 | Supply and fix 15mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.28 kg as approved, fixed as in repairs complete all as specified and directed. |
| 22 | Supply and fix 20mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.45 kg as approved, fixed as in repairs complete all as specified and directed. |
| 23 | Supply and fix central hole wash Basin Mixer, Bathroom & Kitchen mixer , without poupwaste system and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 24 | Supply and fix telephonic wall mixer with hand shower for Bathroom 2 in 1 without poupwaste system with 1.00 m long silver tube/pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 25 | Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified |
| 26 | Supply and fix in repair, PVC bathroom mirror cabinet size 400x500mm, selected quality, single door, wall mounted plastic multi utility type, complete all as specified & directed by Engineer-in-Charge. |
| 27 | Supply and fix of PVC waste down pipe of 40mm bore complete all as specified and as directed. |
| 28 | Supply and fix of PVC waste down pipe of 32mm bore (folding) complete all as specified and as directed. |
| 29 | Supply and fix PVC flexible pipe 32 mm(non-folding) suitable for WHB/ Sink/Urinals, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply and fix 15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed. |
| 31 | Supply and fix 15mm dia PVC connection with PTMT nut, of length 750mm, fixed as in repairs complete all as specified and directed. |
| 32 | Supply and fix frame less 6mm thick looking of any shape and size directed fixed to wooden on plugs with chromium plated brass screws and cup wasgers complete all as specified. |
| 33 | Supply and fix Viterious china toilet paper holder colour, in repair, complete all as specified and as directed |
| 34 | Supply and fix Grating square 100 mm size (openable) of Stainless steel (Minimum weight 100gms) complete all as specified & directed by Engineer-in-Charge. |
| 35 | Supply and fix Grating square 150 mm size (openable) of PTMT (Minimum weight 100gms) complete all as specified & directed by Engineer-in-Charge. |
| 36 | Supply and fix PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing complete all as specified & directed. |
| 37 | Supply and fix in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe complete all as specified & directed by Engineer-in-Charge. |
| 38 | Supply and fix in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 20mm bore iron pipe complete all as specified & directed by Engineer-in-Charge. |
| 39 | Supply and fix in repair, mild steel chromium plated Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 40 | Supply and fix in repair, rectangular sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs, complete all as specified and directed by Engr-In- Charge. |
| 41 | Supply and fix Fancy type elegant corner glass shelf of radius 300 mm with 300x600 mm size including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed. |
| 42 | Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site complete all as specified & directed by Engineer-in-Charge. |
| 43 | Supply and fix Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple(inlet & outlet) etc. but excluding connection of ball valve, over drain pipe complete all as specified and directed. |
| 44 | Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site complete all as specified & directed by Engineer-in-Charge. |
| 45 | Supply and fix Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed. |
| 46 | Material and labour for cleaning existing RCC/PVC Tank of capacity exc 250 ltrs but n.exc 500 Ltr by mentioned process complete all as specified & directed by Engineer-in-Charge. |
| 47 | Same as above Srl Item No 45.00, but capacity exc 500 ltrs but n.exc 1000 Ltr complete all as specified & directed by Engineer-in-Charge. |
| 48 | Note: For above items Tank cleaning process:-(a) Dewatering & Removing all settled silt, scale & Dust from inside of tanks using brush manually and applying bleaching power, allowed to rest for 1 hour. (b) Cleaning and rinsing the tank using fresh water to wash out complete and allowed to dry for 30 min. (c) Writting detals of 7 cm height using synthetic enamel paint(white/black colur) to mention date of cleaning including rubbing out old letters written over the tank, complete as specified. |
| 49 | Supply & fixing PVC cover for water tank capacity exc. 250 litres but n. exc. 500 litres, Threaded or flap type including fixing new MS hinges and staples made for purpose, fixed as in repairs complete all as specified and directed. |
| 50 | Same as item No 48.00 above, but capacity exc 500 ltrs but n.exc 1000 Ltr all as specified. |
| 51 | Supply and fixing 15mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors and taking down old, complete all as specified & directed. |
| 52 | Supply and fixing 20mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors and taking down old, complete all as spd & directed. |
| 53 | Refixing old 15mm GI tubing and connections on new or old position (wall,ceilings, floor etc.) and taking down old, complete all as specified and directed. |
| 54 | Refixing old 20mm GI tubing and connections on new or old position (wall,ceilings, floor etc.) and taking down old, complete all as specified and directed. |
| 55 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, walls etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified & directed by Engineer-in-Charge. |
| 56 | Material and labour for water proofing treatment of sunken floor of WCs, bathroom etc. by applying of the std specifications process, complete all as specified & directed by Engineer-in-Charge. |
| 57 | Note: For above item Std Specification process for Sunken Treatment (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose/unsound material, dirt, dust, etc.(ii) Applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating Hydroproof Xtra of FOSROC/Equivalent of Dr Fixit of Pidilite Industries Ltd in the ratio of 1:2:4 (One part of acrylic polymer : Two part of water and four part of cement).(iii) First layer of cement slurry @ 0.444 Kg/Sqm mixed with acrylic based modified cementious composite compound @ 0.222 Litre/Sqm and allow it to air dry for 04 hours.(iv) Second layer of cement slurry @ 0.222 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.111 Litre/Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours.(v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment.Note :- Joints of WC/Trap/Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. |
| 58 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 59 | Material and labour for first quality joint free Non Skid glazed ceramic tiles (coloured) 7 to 8mm thick area of each tile 0.18 Sqm but not exceeding 0.38 sqm, in 600x600x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) and incl dismantling old floor tiles with bed, complete all as specified and directed by Engr-In- Charge. |
| 60 | Material and labour for 1st quality, joint free glazed ceramic coloured tiles 300mm x 600mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4 and incl dismantling old wall tiles with bed, complete all as specified and directed by Engr-In- Charge. |
| 61 | Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required as in repair, complete all as specified and directed. |
| 62 | Supply and fix 110mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified. |
| 63 | Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified & directed by Engineer-in-Charge. |
| 64 | Supply and fix 110mm dia PVC (SWR) reducer, single, equal or unequal of any length including jointing with solvant cement as required complete all as specified. |
| 65 | Supply and fix 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified. |
| 66 | Supply and fix 75mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified. |
| 67 | Supply and fix 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified. |
| 68 | Supply and fix 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified. |
| 69 | Supply and fix 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified. |
| 70 | Supply and fix 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including camps as required as in repair, complete all as specified and directed. |
| 71 | Material & Labour brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 and incl dismantling of old brick work, complete all as specified & directed. |
| 72 | Same as item No 70.00 above but except bricks all as specified. |
| 73 | Material and labour for Rendering 15mm thick on fair faces of newly brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and directed by Engr-In- Charge. |
| 74 | Material and labour for Rendering 15mm thick on fair faces of old brick work or concrete surfaces at any height incl walls, cornices, chajjas, sun shades etc. in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface) incl necessary using scafolding or shuttering and taking down old plaster, complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 75 | Supply only Integral waterproofing compound all as specified as per manufacture instruction complete all as specified and directed by Engr-In- Charge. |
| 76 | Material and labour for preparation of new plastered or unplastered surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint, complete all as specified. |
| 77 | Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces) and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 78 | Material and labour for for applying 3 mm thick (achieved in two coats) wall care putty of new undecorated plastered surfaces of wall complete all as specified and directed |
| 79 | Material and labour preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge. |
| 80 | Material and labour for Rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 81 | Material and labour for preparation of plastered or unplastered new decorated surfaces of ceiling etc.applying three coat of white lime wash complete all as specified and directed by Engr-In- Charge. |
| 82 | Material and labour RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in shelves / slabs and like with and incl use and waste of necessary form work and demolition of RCC as in chajja/shelves, RCC Tank, kitchen chimney etc., including removal complete all as specified. |
| 83 | Material and labour MS TMT Bars 8mm/10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 84 | Material and labour machine cut Granite slab 15 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing, polshing and dismantling old granite with bed, complete all as specified & directed by Engineer-in-Charge. |
| 85 | Material and labour for Rounding to edges of stone slabs any thick as in in steps, jambs, pillars, cokking plateforms and likes complete all as specified |
| 86 | Supply and fix in repair, soap dish size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified & directed by Engineer-in-Charge. |
| 87 | Supply and fix Urinal spreader any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) as in fixed in repair complete all as specified & directed by Engineer-in-Charge. |
| 88 | Supply and fix in repair Vitreous China urinals, Half stall type (back or corner wall type) of size 420x395x635mm of white with incl CP brass coupling, PVC flexible discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe, complete all as specified & directed by Engineer-in-Charge. |
| 89 | Supply and fix Powder coated (Colour & Texture as directed) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frames with extruded built up standard tubular sections/ appropriate Z sections and other sections (Size as directed) of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 90 | Supply and fix powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos, anodised sliding door bolts 250mm long with hasp and staple(bolt type) in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 91 | Supply and fix powder coated Anodised aluminium window, ventilator & cabinate shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 no.), stainless steel hinges 100mm (2 no.)/ stainless steel handles 125mm (1 no.)/ stainless steel Tower bolts 150mm (2 no.)/ pivots/ fasteners/ stays/ rollers, complete all as specified & directed by Engineer-in-Charge. |
| 92 | Supply and fix, as in repair, Door closer hydraulically regulated, Aluminium (extruded section) body, designation No. 2, universal type, suitable for door shutters of 701 to 851 mm in width and of weight between 61 to 80 kg and fixed, complete all as spd and directed. |
| 93 | Supply and fix double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified |
| 94 | Supply and fix for brass mortice lock, vertical type,4 levers, size 100 mm, as in repairs, all as specified and directed |
| 95 | Supply and fix for 12 mm thick Pre laminated interior grade one side with decorative choice lamination & other side balancing white lamination, laminated board, complete all as specified & directed by Engineer-in-Charge. |
| 96 | Supply and fix Figured glass thickness 4 mm, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified & directed by Engineer-in-Charge. |
| 97 | Supply and fix stainless steel steel wire cloth for gauge door shutter & windows shutter 0.36mm nominal dia of wire and 1.40mm aparture fixed with tinned tackes or galvanised wire staples or iron flates complete all as specified & directed by Engineer-in-Charge. |
| 98 | Supply and fix PVC bathroom mirror cabinet size 400x500mm, selected quality, single door, wall mounted plastic multi utility type, complete all as specified & directed by Engineer-in-Charge. |
| 99 | Supply and fix table mounted tall boy, stainless steel, chrome finish, automatic touchless basin mixer (hot & cold) with sensor with sensor eye for basin with complete kit (incl battery/DC operated system) complete all as specified & directed by Engineer-in-Charge. |
| 100 | Supply and fix in repair, table mounted tall boy, stainless steel, chrome finish, automatic touchless basin mixer (hot & cold) with sensor with sensor eye for basin with complete kit (incl battery/DC operated system) complete all as specified & directed by Engineer-in-Charge. |
| 101 | Supply and fix brass chromium plated dual foldable tubular towel rack, 20mm dia 'D' type 60 cm long between flanges complete all as specified |
| 102 | Supply and fix in repairs vitreous china wash down water closet (pedestal pattern) , of colour snow white, of size 570x460x380mm and including plastic seat cover of same colour, pressure jet spray etc. complete all as specified and as directed |
| 103 | Supply and fix wash hand basin, vitreous china, white, decorative type, flat or angle back, size 550mm x 400mm incliding cutting for and pinning in ends of brackets or erecting stand, incl CP waste coupling but exclusive of pillar tap and waste pipe, fixed as in repairs complete all as specified. |
| 104 | Supply and fix Vitreous china squatting pan, \\"Orissa pattern\\" of size 580 x 440 mm white with integral foot rests,including cast iron P or S trap with provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, PVC flush pipe 32mm etc complete fixed in repair, complete all as specified & directed by Engineer-in-Charge. |
| 105 | Material and labour for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repairs complete all as specified and directed. |
| 106 | Supply and fix, in repair, vitreous china, Table-Top wash hand basin for bathroom, ceramic glossy Rectangle Countertop vessel sink , white, fency decorative type, approx size 600mm x 400x 120mm fixed over granite incliding CP waste coupling, waste pipe but exclusive of pillar tap/mixer, PVC connection, complete all as specified and as directed by Engr-in-Charge. |
| 107 | Supply and fix vitreous china wash down water closet (pedestal pattern) inbuilt connectivity to syphonic action type flushing cistern (One-Piece EWC, floor/wall mounted) with PVC in let ball valve, float and push button, 10 ltrs capacity, of colour snow white, of approx size 720(H)x405(h)x635(L)x350(B)mm and including slim soft close seat cover of same colour & pressure jet spray and all necessary fittings etc. complete all as specified and as directed by Engr-in-Charge. |
| 108 | Supply and fix, wall hung, rectangular/trapezodial shaped curved edges urinal partition plate of frosted glass 8mm thick, approx min. size 900x450mm incl stainless steel hinges, brackets & installation accessaries for easy set up and normally about 40cm above floor line complete all as specified & directed by Engineer-in-Charge. |
| 109 | Supply and fix, stainless steel, chorme finish, bottle trap for urinals or WHB, complete all as specified & directed by Engineer-in-Charge. |
| 110 | Supply and fix, in repair, stainless steel, chorme finish, bottle trap for urinals or WHB, complete all as specified & directed by Engineer-in-Charge. |
| 111 | Supply and fix, in repair, wall mounted stainless steel, chrome finish, automatic touchless urinal flusher with sensor consisting of wall flange with sensor eye for urinals with complete kit (incl exposed part kit and concealed installation box & battery of 4x 1.5V AA) complete all as specified & directed by Engineer-in-Charge. |
| 112 | Amount of credit of Rs. 77652.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender