Tender For Special Repair To Bldg No P-1396, P-1403, P-1404, P-1410 And P-1411 Of 33 Armd Dou At Mil Stn Hisar Under Ge Hisar
Tender Value
38.65 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
16 days left
EMD
77300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-1396, P-1403, P-1404, P-1410 And P-1411 Of 33 Armd Dou At Mil Stn Hisar Under Ge Hisar
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roof tiles, single layer on roofs complete all as speified & directed. |
| 2 | Demolition of mud in roofs, any thicknes, including plastering and leeping (whether full thickness removed or only or part thereof) complete all as speified & directed. |
| 3 | M&L for 40mm thick brick tiles laid on cement mortar (1:6) 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed. |
| 4 | Laying/ fixing of 40mm thick brick tiles (retrived from Item No. 1 above) laid on cement mortar (1:6) 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed. |
| 5 | M&L for cutting or uprooting grass on old mud phuska, removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster complete all as specified and as directed. |
| 6 | M&L 10 mm thick cement screed in CM 1:3 mixed with water proofing compound of approved make over RCC roof slab/brick tiles and vertical surface, finished even and smooth by using steel trowel complete all as specified and directed. (Note :- WPC shall be measured and paid seperatly.) |
| 7 | M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by forced application method complete all as specified and directed and described as under. Four course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm.(b) Laying of APP based membrane as specified thickness and weight.(c) Applying one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm.(d) Applying two coat of aluminium paint @ 200ml/sqm.Note :- APP membrane work shall be excuted by athorised applicator of APP as approved by GE. |
| 8 | Chipping of loose/ damaged /cracked / previously repaired / delaminated or weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and directed. |
| 9 | Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using product: Rustoff-100 of Sika or equivalent make in Fosroc/ Thermax as approved by GE, with density 1.01 Kg/ltr at 30 degree celsius and consumption 0.2 Kg/ Sqm/ coat complete all as specified and directed.Note : The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar. |
| 10 | Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption 3.75 kg/Sqm for two coats and Product requirements: carbonation resistance: 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N / Sqmm according to ASTM C 882-78 complete all as specified and directed.Note: The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar. |
| 11 | M&L for providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including preparation of surface throughly and cleaning complete where ever required with using Product: Sikadur®-32 LP of Sika or equivalent in Fosroc / Thermax as approved by GE with Consumption: 0.4 kg/Sqm and Product requirements: Complies with ASTM C 881-78, Type II Grade 2 Class B+C complete all as specified and directed. |
| 12 | M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed. |
| 13 | M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc/Thermax as approved by GE at an average thickness of upto 10mm to the prepared concrete substrate in slffit of slabs, beam, columns, parapets, fins and facias at any height including finishing of applied Polymer mortar as per the technical specifications and manufacturer’s instructions complete all as specified and directed. |
| 14 | Supply and apply a ready to use non shrink, cementious free flow micro-concrete (<100 mm) using Product: SikaRep® Microcrete-4 + adequate coarse aggregate, Yield: approx 17 Ltr/bag (30 Kg) (depending on the size and quantity of coarse aggregate added), Product : SikaRep® Microcrete-4 or equivalent make in Fosroc / Thermax as approved by GE, Product requirements: compressive strength > 60 N/Sqmm (28 days) according to ASTM C 1107-99 complete all as specified and directed. |
| 15 | M&L for providing and fixing 12-16mm dia injection ports non returnable nozzle by drilling, cleaning and sealing holes 50-75 mm deep at 200mm c/c with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents using Sikadur 31 of Sika or equivalent make in Fosroc / Thermax as approved by GE as in beams, columns, slab and parapets as per the technical specifications and manufacturer's instructions complete all as specified and directed. |
| 16 | M&L for grouting of nozzles with low viscous moisture insensitive, High strength, epoxy resin grout with Sikadur 52 LP (IN) of Sika or equivalent make in Fosroc / Thermax as approved by GE with pressure not excedding 2-3 Kgf/Sqcm till the nozzle refuses to take further grout including cutting extra length of the nozzle after the grout hardens and finishes as per the technical specifications and manufacturer's instructions complete all as specified and directed. |
| 17 | Demolition of brickwork or stone/ boulder masonry, pcc block masonary built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc. complete all as specified and as directed. |
| 18 | M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed. |
| 19 | Taking down cement plaster of any description upto three storeys including necessary scaffoldings including raking out joints, hacking for key, scrubbing down with water etc. from wall & ceiling surfaces complete all as specified and directed. |
| 20 | M&L 10mm thick rendering on fair faces of brick/conc surfaces in CM 1:4 finished even & fair complete all as specified and directed. |
| 21 | M&L preparing new plastered or unplastered surfaces of walls and applying two coats of white wash on newsurface with and including complete removal of existing treatment of any layer of wall complete all as specified and directed. |
| 22 | M&L 5mm thick rendering on fair faces of conc surfaces of ceiling in CM 1:3 finished even & smooth with out using extra cement complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surfaces of wall/ceiling and applying three coat of white wash complete all as specified and directed. |
| 24 | M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in two coats (first coat 10 mm thick in CM 1:4 and second coat 5 mm thick cement mortar 1:4, using liqiud water proofing compound, finished fair & even w/o using extra cement at any height including all necessary scaffolding etc. complete all as specified and directed. (Note:- WPC shall be measured and paid seaperatly.) |
| 25 | Supply only liquid water proofing compound complete all as specified and directed. |
| 26 | M&L for preperation of newly plastered surface applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height including necessary scafolding etc complete all as specified and directed. |
| 27 | M&L for complete removal of existing paint from wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10bsqm over 2 mm putty at any height including necessary scafolding etc complete all as specified and directed. |
| 28 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer and 2mm wall putty of same make with and including complete removal of existing treatment of any layer of wall by sanding with internal dust extraction system for clean environment and complete all as specified and directed. |
| 29 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of ceiling surfaces complete all as specified and directed. |
| 30 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 31 | M&L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection including cutting grooves at every 2mtr interval and fillling with bitumin sand mix in ratio 1:1 complete all as specified and directed. |
| 32 | Taking down shutter of any description area exc. 2 Sqm complete all a specified and diredted. |
| 33 | S&F steel rolling shutters, without ball bearing, as specified including top covers, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, gear operated type with bevel gear box and crank handle, 1.00 mm thickness of laths complete all as specified and directed. |
| 34 | M&L for painting, two coats with synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including preparation of surfaces and priming with red oxide complete all as specified and directed. |
| 35 | Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 36 | S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed. |
| 37 | Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 38 | S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed. |
| 39 | S&F in repair CP angle valves (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch screwed both end for iron pipe or for unions complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 41 | S&F in repair 15 mm bib tap ( fancy type) long body, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 42 | S&F in repair pillar cock, swan neck 15mm dia mixture for hot and cold, CP fency type long screwd shank complete all as specified and directed. |
| 43 | S&F Wash hand basin, Vitreous China ovel shaped, first quality, white colour, of size 560x430x195mm under counter fixed in granite with sutaible arrangement with 750mm long PVC waste pipe 32mm dia, CP waste coupling with long screwed shanks and fly nuts complete all as specified and directed. |
| 44 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one. |
| 45 | S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed. |
| 46 | S&F in repair single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate co,mplete all as specified and directed. |
| 47 | M&L Granite black colour dark shade, 18-20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. |
| 48 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 49 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 50 | M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed. |
| 51 | M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3 and d complete all as specified and directed. |
| 52 | M&L for PCC 1:2:4 type B1 40mm thick (using 20mm graded aggregate) as in levelling course to match the undulations of floor complete all as specified and directed. |
| 53 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 54 | S&F factory made mild Steel ventilators with top hung shutter (Box Type) to receive glass or wire guage and steel peg stay with and including necessary welding, reveting, tower bolt, hanlde, holdfast & hinges complete all as specified and directed. |
| 55 | S&F factory made mild steel windows (Box Type ) with side hung shutters including glazing bars to receive glass, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed. |
| 56 | S&F factory made mild steel windows (Box Type ) with side hung shutters without glazing bars but including sash bars to receive wire gauge, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed. |
| 57 | S&F in replacement aluminium anodized powder coated ventilator using rectangular tube of size 63.5 x 25 x 1.5mm with 4mm thick design glass louvers etc., complete all as specified and directed. |
| 58 | S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 59 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge (Note: Stainless steel butt hinges shall be measured and paid separately.) |
| 60 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4.00 Sqm each complete all as specified and directed. |
| 61 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. specification & drawing complete all as specified and directed. |
| 62 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Stainless steel butt hinges screws shall be paid separately.) |
| 63 | S&F 30mm thick Factory made wire mesh solid WPC (Wood Polymer Composite) shutter of consisting density of 600 Kg/Cum and door to be panelled with ss mosquito mesh and XTN aluminium mesh for additional strenth and safety purpose hologram to be clearly visible on material, Manufacture test certificates to be submitted complete all as specified and as directed by Engr-in-Charge. NOTE : The rate inclusive of weding on existing chowkat or any modification as required to fix the new shutter and make good to match with exsisting surface. |
| 64 | S&F stainless steel butt hinges medium weight of size 100 mm fixed with stainless steel screws complete all as specified and directed. |
| 65 | S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 66 | S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 67 | S&F in repairs 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in repair 140 mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 69 | S&F plain glass 4.00 mm thick, pin head type and glazing with oil putty & necessary screwing / cliping in squares/ rectangle exc 0.5 Sqm in each pane complete all as specified and as directed and directed. |
| 70 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 71 | S&F chromium plated Tubular towel rail, 18/20mm dia, D type, 60cm long between flanges, fixed withl screws complete all as specified and directed. |
| 72 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 73 | S&F 110 mm bore PVC (SWR) pipes 3mm thick SN-4, single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 74 | S&F 75 mm bore PVC (SWR) pipes 3mm thick SN-4, single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. |
| 75 | S&F 110 mm PVC (SWR) bends (with acess door) any radius complete all as specified and directed. |
| 76 | S&F 75 mm PVC (SWR) bends (with access door) any radius complete all as specified and directed. |
| 77 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided complete all as specified and directed. |
| 78 | M&L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 79 | S&F in repairs SS curtain rod 20mm dia, CP with and including fancy type CP bracket 2 Nos of each opening and side stopper fancy type powder coated of required shape and size 2 Nos of each opening complete all as specified and directed. |
| 80 | Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 200mm dia complete all as specified and directed. |
| 81 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed. |
| 82 | S&F Reinforced concrete pipes 150mm dia class NP 2 with one collar per length of pipe including all fittings complete all as specified and directed. |
| 83 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 84 | M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to grade of steel Fe 500D complete all as specified and directed. |
| 85 | M&L TMT bars 5mm dia and over up to and including 10 mm dia cut to length bend to shape required including cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups, spacers and binders complete all as specificed and as directed. |
| 86 | Providing and fixing water tight centering & shuttering and Scaffolding including bolting, strutting, propping etc. including removal of form work from column, beam , slab etc. complete as per site requirement and directions of Engineer-in-charge. |
| 87 | Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed. |
| 88 | M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular press steel/Metal flush box and cover Plate, complete, all as specified & directed. |
| 89 | All as per item No. 88.00 (here-in-before) but one Fan/exhaust fan point controlled by one Number one way switch complete all as specified and directed. |
| 90 | All as per item No. 88.00 (here-in-before) but for one 6 Amp socket outlet on independent board controlled by one Number one way switch on independent board. |
| 91 | All as per item No. 88.00 (here-in-before) but for one 6 Amp socket outlet on the same board controlled by one Number one way switch on same board. |
| 92 | All as per srl item No. 88.00 (here-in-before) but for 16 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire complete all as specified and directed. |
| 93 | S&F 1 modular switch 1 way 6 Amp, 230V 1 module all as specified & directed. |
| 94 | S&F 1 modular switch 1 way 16 Amp, 230V 1 module all as specified & directed. |
| 95 | S&F 2 modular Socket, 6A - 2/3 pin combined 230 volts AC complete all as specified and directed. |
| 96 | S&F 2 modular Socket 6A/16A - 5/6 pin combined, 230 volts AC complete all as specified and directed. |
| 97 | S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 98 | S&F LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 99 | Fixing only LED lights fitting 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 100 | S&F Building security light LED light fitting 35 watt, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed. |
| 101 | S&F MCB single pole, 240 volts, 10 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed. |
| 102 | S&F MCB SPN, 240 Volts, 40-63 Amps breaking capacity 10 KA complete all as specified and directed. |
| 103 | S&F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed. |
| 104 | S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 105 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) including taking out old existing earthing complete all as directed. |
| 106 | S&F sub main wiring using two single core 4 sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing PVC conduit 25mm dia accessories like bends, tee, etc. and connecting to earth dolly and including 4.0 sqmm earth wire, PVC insulated & unsheathed complete all as specified and directed. |
| 107 | Taking out the old unserviceable LT underground cable 10 Sqmm 2 Core 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors from trenches/wall/floor/road/ culverts or pole etc including brick cover complete all as specified and directed. |
| 108 | Supplying, laying, jointing, testing and commissioning of LT UG XLPE cable size 10 sqmm 2 core insulated screened PVC beded galvanised steel strip or wire armoured electric power (heavy duty) with aluminium conductor 1100 volts grade complete of all as specified and directed. (Note :- Cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge.) |
| 109 | Supply and laying double wall corrugated pipe (DWC) confirming to IS 19430 Part -I of size 50mm outer dia and 38mm inner dia complete all as specified and as directed. |
| 110 | Excavation in trenches in hard/dense soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed. |
| 111 | Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed. |
| 112 | Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directed. |
| 113 | Taking down fan, sealing cable end, down rod, dismantling blades and removing fan and blades to store for Re-Use and complete all as specified and directed by Engr-in- Charge. |
| 114 | Supply and fixing ceiling fans (Copper winding) complete with blades, down rods and accessories, 230V, 1200mm sweep , min air delivery 210 CFM, BEE five star rated with brushless direct current motor(BLDC) with remote complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender