Tender For Additionn/Alteration To Bldg No P-32 At Vsn Chiloda
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
3 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Additionn/Alteration To Bldg No P-32 At Vsn Chiloda
BOQ
| Sl. No. | Item Description |
| 1 | S&F steel work in tubular trusses including special shaped washer,as in purlin / rafter, ms plate and connecteing works etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 2 | S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes ,complete all as specified and directed. |
| 3 | S&F Stainless steel grade SS 304 12mm dia Anchor fastener 150mm long for fixing mild steel plates of 8 mm thickness to walls & floors complete all as specified and directed.. Make: Hilti or equivalent |
| 4 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth ,complete all as specified and directed. |
| 5 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified and directed. |
| 6 | S&F 16 mm thick Toughened glass fixed with necessary stainless steel framing and supports cut to shape reqiured with rounded edges fixed with chromium plated screws to floors and walls including necessary fittings complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) or chequred or interlocking tiles removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M&L for double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 SQM not exceeding 3.00 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc and including screed bed 20mm thick in CM (1:6) complete all as specified and directed. |
| 9 | ..ditto.. as per Item no 8 above but as in skirting with 10mm thick rendering on wall ,complete all as specified and directed. |
| 10 | M&L for providing & fixing false ceiling 12 mm thick semi perforated GRG false ceiling tiles at all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS8225:1987, Non combustible as per BS4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 11 | M&L for Brickwork with old size fly ash bricks straight or curved on plan exc 6 mmean radius built in CM (1:4) complete all as specified and as directed. |
| 12 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth (without using extra lime or cement) all as specified and directed. |
| 13 | M&L for preparing of previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer all as specified and directed. |
| 14 | M & L for complete removal of existing treatment on old wall surfaces and applying two coats of oil bound distemper over 3mm thick wall care putty |
| 15 | Supply and fixing solar control film of 50 micron |
| 16 | S&F Vertical blind/ roller blind with aluminium powder coated channel & PVC runners and fabric blinds fixed to window as per manufacture instruction having roller , threads / Chain & pully system (clutching mechanism) etc complete Sample /Design approved as per GE all as specified and directed by Engr-in-Charge. |
| 17 | S&F PVC (SWR)110mm bore pipes, single socketed in any length with rubber ring joints fixed to wall all as specified and directed. |
| 18 | S&F PVC(SWR) bends 110mm bore any radius all as specified and directed.,complete all as specified and directed. |
| 19 | S & F for Aluminium composite Panel (ACP) sheet 3mm thick of selected quality fixed to wooden or particle or plywood ,complete all as specified and directed. |
| 20 | M&L for Providing, cement concrete B0 1:2:4( 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges,complete all as specified and directed. |
| 21 | M&L for Disconnecting existing tanks exc 500 ltrs but n exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position,complete all as specified and directed. |
| 22 | S&F 20 mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 23 | S&F 20 mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender