Tender For Special Repair To Ors Md Accn Bldg No Po/13-E, Po/13-F, Po/13-G And Po/13-H Of Hq Inf Bde Of Age B/R And Age E/M Under Ge Tenga
Tender Value
33.83 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
2 days left
EMD
67660
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Ors Md Accn Bldg No Po/13-E, Po/13-F, Po/13-G And Po/13-H Of Hq Inf Bde Of Age B/R And Age E/M Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd. |
| 2 | Taking down chowkhats or frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd. |
| 3 | Taking down shutters of any description n. exc 1 Sqm each complete all as specified. |
| 4 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified. |
| 5 | S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 6 | Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required,Depth of embedded portion of holddfasts or lugs measured from the face of the jamb into the wall exc Half brick but not exc one brick complete all as specified and directed. |
| 7 | S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed. |
| 8 | S&F for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed |
| 9 | S&F for 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I 2009 (Larger size to be provided) complete all as specified and directed |
| 10 | S & F for glazed and Skelton shutters 30mm thick of 2nd class hardwood,open rebated and prepared to receive glass, guaze etc (Without Sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc;sizes of members of shutters as specified in SSR Part I 2009 Section 8, clause 8.24 (a); suppplied and fitted to chowkats complete all as specified and directed. |
| 11 | S&F 30 mm thick second class hard wood Glazed and skeleton shutters for window and ventilators etc, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of sash bars and framing moulded plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b) complete all as specified and directed. |
| 12 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to matc with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 13 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling ofwood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading unsed inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 14 | M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 15 | M & L preparation of Old wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 16 | S&F for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqm as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. |
| 17 | M&L two coats of synthetic enamel paint on old steel surfaces of any description, exc 10 Cms in width or girth, including preparation of surfaces, complete all as specified and directed. |
| 18 | M&L for preparation of new steel surfaces / MS sheet of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed. |
| 19 | S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified & directed. |
| 20 | Hacking out old broken glass (any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed. |
| 21 | M&L 3 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with alluminium frame work rubber etc all as specified and directed. |
| 22 | M&L 3 mm thick plain glass sheets ordinary quality in squares n exc 0.5sqm each pane fixed with aluminium frame work etc all as specified and directed. |
| 23 | M&L for 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane |
| 24 | S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 25 | S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed |
| 26 | S & F Continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 27 | S&F for 65 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 28 | S&F for 75 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 29 | S&F for 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 30 | S&F for 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 31 | S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 32 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed. |
| 33 | S&F for aluminium handles, cast type, anodised Size of handle in 100mm complete all as specified and directed. |
| 34 | S&F for aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed. |
| 35 | S&F for 300 mm mild steel ordinary Rat tail door spring for door closer,complete all as specified and directed. |
| 36 | S&F 100 mm long hasp and staple , mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified. |
| 37 | S&F for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover plate 140mm complete all as specified and directed. |
| 38 | S&F for PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as directed. |
| 39 | S&F for peg set of 4, brass chromium plated, fancy type, superior quality and fixed with screws complete all as specified and directed. |
| 40 | S&F brass door magic eye: as given specification material resin lens +zinc alloy,top diameter: 31.2mm, botom diameter approx 24mm, pipe diameter approx 16mm total length approx 50mm, inner height approx 36mm application 35 to 60mm thick viewing angle 200 degree of surrounding without opening the door unique design ultra clear view and superior finish, wide angle best in class lens for all round visibility the outsider cannot hide any ware, the back cover protects you from the outsider observing any movements inside easy to instal with inbuilt screw over a wide range of door thickness from 35 mm to 60mm etc required at site complete as directed by Engr-in-charge |
| 41 | Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles |
| 42 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed. |
| 43 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks 10 cm thick and setting in CM 1:4 etc complete all as specified and directed. |
| 44 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 45 | M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 46 | M&L Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed. |
| 47 | M&L for rendering 15mm thick in CM (1:4) over concrete wall surfaces finished even and smooth without using extra cement inluding mixing of water proofing compound @ 200ml/50kg of cement & measured & paid seperately complete. |
| 48 | M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even complete. |
| 49 | M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed. |
| 50 | Supply only `Liquid Water Proofing Compound. complete all as specified and as directed . |
| 51 | Material and labour for complete removal of existing treatment surface externally of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 52 | Material and labour for preparation of newly plastered external surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 53 | M&L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and two coats of distemper oil emulsion over a coat of primer of new surfaces complete all as specified and directed |
| 54 | M&L Preparation of old surface complete removal of existing treatment and applying 2mm thick wall care putty over one coat of primer and making the surface smooth and two coats of Oil bound distemper on old surface of wall surface complete all as spd and directed.(old portion) |
| 55 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed. |
| 56 | M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as spd and directed. |
| 57 | Material and labour for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 centimeter high but not exceeding 30 centimeter high etc with synthetic enamel paint including necessary scaffolding up to four storeys height of bldgs if required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 58 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in cement mortar |
| 59 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . |
| 60 | M&L 25 mm thick PCC ,type B-1 1:2:4 (20 mm graded aggregate) in flooring below tiling complete all as specified and directed. |
| 61 | S&F for non skid coloured Ceramic tiles 07mm to 08mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 62 | S&F for non skid coloured ceramic tiles 07-08 mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 63 | M&L for glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:3) and finished rough, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as spd & directed. |
| 64 | M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed.Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. |
| 65 | Labour Providing Granite stone any description edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 66 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed. |
| 67 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed. |
| 68 | S & F incl leakage testing galvanised steel water tubing medium grade 15 mm dia bore with all fittings such as bends, elbow, socket, reducer etc, laid under floor / trenches or fixed complete to walls all as specified & directed. |
| 69 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc complete all as specified. |
| 70 | M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 71 | S&F in repair Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed. |
| 72 | S&F in repair Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed. |
| 73 | S&F in repair CP Bib taps for 15 mm bore pipe, cast copper alloy screwed down crutch butterfly handle with brass ferrule complete all as spd and directed. |
| 74 | Supplied and fixed in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe |
| 75 | Supplied and fixed in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe |
| 76 | S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste coupling 32mm size full thread , all as spd and directed |
| 77 | S&F for in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 78 | S&F in repairs 15mm bore brass Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange mixing hot and cold water, screwd down for 15mm dia iron pipe complete all as specified and as directed . Note:- Hand shower & over head shower will be measured and paid separately. |
| 79 | S&F in repairs soap dish, any type, of size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 80 | S&F in repair CP towel rail 600 mm long complete all as specified and directed. |
| 81 | S& F in repair brass CP Shower rose 125mm with or without swivel joints, any size,including fixing to steel pipe or union complete all as spd and directed. |
| 82 | S&F for 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as spd. |
| 83 | S&F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed. |
| 84 | S&F in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed. |
| 85 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed. |
| 86 | S&F in 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes. |
| 87 | S & F in repair 32/40 mm bore PVC waste pipe flexible with minimum length 800mm complete all as specified and directed. |
| 88 | S&F in repair plate rack made of stainless steel 0.50mm thick, over all size 762mm(H) x 787mm(W) x 254mm(D) complete all as specified and as directed. |
| 89 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 410mm x 330mm x 160mm complete all as spd & directed. |
| 90 | S&F for Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 91 | Supplied and fixed in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms) |
| 92 | Material and labour for cutting down plants / trees of girth not exc 15 cm & surface are not exc 0.36 Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc ,hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed. |
| 93 | M&L for Sunken Treatment of Toilet & Bathroom (including Demolition as in following steps: (i) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick in CM 1:3 using approved water proofing compound @ 3% by weight of cement finished even & smooth using extra cement ,curved at the junctions. (ii)Apply two coat of epoxy resin/polymer modified cementations coating like a brush bond of FOSROK/SIKA/Pedilite or equivalent, both on floor & beams. (iii) Sunken slabs to be given 1:20 slope outword 25mm GI pipe spout with 300mm projection beyond outer surface of wall shall be provided. (iv) Water tightness of sunken portion to be tested by ponding with water for 72 hours.In case of even a slight mark of seepage,the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab. (v) The sunken portion will be filled with lean concrete 1:4:8 type D-2 using brick agg to req depth. Note:No cutting in roof slab/beam shall be allowed for passing of CI pipes & fittings.The stage of water proofing to sunken slab shall be passed by Eng-in-charge/GE. |
| 94 | M&L PCC 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) mixed with water proofing compound as per manufacturer’s instructions as in padding on roof / chajja surface finished even and smooth without using extra cement all as specified and as directed.(Note:- WPC shall be measured and paid separately) |
| 95 | M&L for Providing cement concrete 1:2:4, type B-1, (using 20 mm graded crushed stone aggregate) mixed with water proofing compound as per manufacturer’s instructions as in roof / chajja kerbs,bands etc or mud stops, rounded or chamfered on edges cement all as specified and as directed.(Note:- WPC shall be measured and paid separately) |
| 96 | M&L for taking down of existing tarfelt and bituminous compounds in roof of any discription from roof or terracing,roughening surfaces of old concrete surface by picking u,sweeping clean and washing down with water to remove dust etc providing 15 mm thick screed bed or bedding layer of CM(1:4) for laying water proofing membrane and finishing surface even and smooth w/o using extra cement and providing water proofing treatment over smooth finished surface after applying hot bitumen 85/25 @ 1.2 kgs/Sqm providing laying APP polymer, modified,non-woven polyster mat,reinforced membrane,3mm thick(min)weighing 3.50 kg/Sqm with surface finish of white mineral,by torch application method,with minimum 75mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying one coat of bituminus based solar reflective aluminium paint @ 100Gms/Sqm over PP modified membrane all as specified and directed. |
| 97 | Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store . |
| 98 | S&F for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls or laid in trenches or floors all as specified and directed.(ISI MARKED) |
| 99 | S&F for PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls or laid in trenches or floors all as specified and directed. |
| 100 | Supplied and fixed PVC (SWR) bends any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 101 | Supplied and fixed PVC (SWR) bends any radius 75mm dia all as specified and directed.(ISI MARKED) |
| 102 | Supplied and fixed PVC (SWR) Single 'T ' any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 103 | Supplied and fixed PVC (SWR) Single 'T' radius 75mm dia all as specified and directed.(ISI MARKED) |
| 104 | Supplied and fixed PVC (SWR) double 'Y ' any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 105 | Supplied and fixed PVC (SWR) double 'Y '' any radius 75mm dia all as specified and directed.(ISI MARKED) |
| 106 | S & F in repairs 75mm / 110mm PVC floor trap, ISI marked with CP grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 107 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm |
| 108 | S&F in repair PVC vent cowl for 110 mm dia all as directed by Engr-in-charge. |
| 109 | S&F in repair PVC vent cowl for 75 mm dia all as directed by Engr-in-charge. |
| 110 | Demolition of reinforced cement concrete Roofs, floors (other than ground floors),beams, staircases, landing,chajjas and similar suspended work (Reinforcement cut as required to facilitate deomolitions) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 111 | S & F in mild steel work conforming to Fe 290 Gde-E-165 in posts, wall & struts angle including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified & directed. |
| 112 | S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof & chajja covering, fixed with self tapping screws etc complete all as specified and directed. (Note:- Item rate shall be include any height of Bldgs / Hangars for scaffolding as all arrangement.) |
| 113 | Excavation and trenches n. exc 1.5 m wide and n.exc 1.5m in depth for foundation of manhole, as in any type of soil and getting out complete all as specified and directed |
| 114 | Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick. |
| 115 | Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal. |
| 116 | M&L cement concrete type B-1 (1:2:4) (20 mm graded aggregate) as in kerb stones ,coping, bed plates, chajjas and the like including weathering, slightly roundered or chamfered angles and throating, as directed including necessary form work and finishing complete all as specified. |
| 117 | M&L PCC 1:3:6 type C-1 (using 20mm graded aggr) as in surface channels & drains,benching of manholes complete allas spd and directed. |
| 118 | M&L Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc. |
| 119 | M&L Pre-cast cement concrete cover slab for manhole and drain in plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) set in cement mortar 1:4 with plain faces complete all as specified and as directed. (Note:- Reinforcement shall be measured and paid seperately) |
| 120 | M&L for Mild steel TMT steel bar 10mm dia & over cut to length bent to shape required and binding wire with and including MS wire annealed not less than 0.9mm dia as in reinforcement complete all as specified and directed. |
| 121 | M&L for cutting into existing manholes (150mm dia pipe) for connecting new drains,making good to pipe and rendering,cutting out existing benching for and forming branch cahnnel(1/2 round or 3/4 section) incement concrete 1:2:4 type B-1 smooth finished and reforming benching as required all as spd and directed. |
| 122 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed. |
| 123 | M&L for Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed. |
| 124 | M&L for cement concrete type C-1 1:3:6 (using 40mm graded agg) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified. |
| 125 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed. |
| 126 | M&L for 75 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and as directed. |
| 127 | M&L for chequered cement concrete tile 30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement siurry in floor with grey cement and pig ments over and including 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed. |
| 128 | Material & Labour for light Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 129 | All as per item No 128 One light point controlled by two two-way switch 5/6 Amp complete all as specified and as directed . |
| 130 | All as per item No 128 One bell/buzzer point controlled by one bell push complete all as specified and as directed . |
| 131 | All as per item No. 128 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 132 | All as per item No. 128 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed. |
| 133 | All as per item No. 128 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with PVC boxes complete all as specified. |
| 134 | M&L for Point wiring for one socket outlet 15 Amp on independent board with 4 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 4 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. (For Geyser ) |
| 135 | S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type |
| 136 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type |
| 137 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 138 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified & directed. |
| 139 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 140 | S&F switch piano two way, 5/6 Amp, flush type (ISI marked), single pole, complete all as specified & directed. |
| 141 | S&F bell/buzzer push 5/6 Amp,flush type complete all as specified & as directed. |
| 142 | S&F call bell ding dong electric AC, 240 volt, 50 HZ, surface type complete all as specified & as directed. |
| 143 | Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed. |
| 144 | S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). |
| 145 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. |
| 146 | S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including GI brackets with fixing arrangements & connected items, twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site all as specified and directed. |
| 147 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 148 | Supply and fix sheet metal enclosures for DBs Double door when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 149 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed. |
| 150 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. |
| 151 | S & F exhaust fan sweep 300 mm voltage 230 V 50 Hz 1200 RPM noiseless metal body light-weight rust proof body self closing louvers and blades complete all as specified and as directed. |
| 152 | Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm |
| 153 | S&F MCCB DB's VTPN type double door in wall / nitch when MCBB's ,to be used Four pole and neutral, 8 way,415 Volt with rated Bus bar ,Suitable for Flush Mounting and Surface Mounting with 160 Amps Copper Bus bar for each phase and 2 Neutral bar, 2 Earth bar, and Cable ties for cable managent,Fully insulated busbar and shrouded Neutral bar ,improved Pan assembly for ease of installation ,Prefitted masking sheet, Reversible Door for IP 43 &IP 54 DB's with provision for DPX3 160 MCCB as incomer, and TPN /SPN/DP/SP out going . complete all as specified and directed. IP :54 Protection |
| 154 | S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA |
| 155 | Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH |
| 156 | Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge |
| 157 | S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm complete all as specified and directed |
| 158 | S&F Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge. |
| 159 | M & L for PVC connections 15mm size with PTMT nuts of length 450mm for hot and cold water connection complete all as specified and directed |
| 160 | Supplying, laying, jointing & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 25 sqmm 4 core as per IS 7098 Pt-II laid in trenches / ducts / encased in GI pipe / fixed to pole complete all as directed and specified. |
| 161 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning. |
| 162 | Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm, factory made of specified make , complete all as specified and directed. |
| 163 | Supply and laying galvanised tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed. |
| 164 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 165 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 4 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.) |
| 166 | S&F in replacement of 2 mm thick MS meter box rectangle type wall mounted including Provision of space for 04 Nos single phase meters complete all as specified and directed |
| 167 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 168 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 169 | Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender