Tender For Repair/ Maintenance To Roads, Path And Road Furniture At Zone A And Zone B At Mil Stn Gaya Under Ge Gaya
Tender Value
41.35 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
16 days left
EMD
82700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gaya → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/ Maintenance To Roads, Path And Road Furniture At Zone A And Zone B At Mil Stn Gaya Under Ge Gaya
BOQ
| Sl. No. | Item Description |
| 1 | M & L for repair to potholes any depth, not exc 1Sq.m each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths, etc, cutting arround edges to at least 25mm in depth, making good by applying tack coat at 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm mtrs, blinded with 0.09 cum of stone chippings, 6.3mm size and again well ramming depth of pot holes excs 30mm (including supply of premixed macadam, binder and chipping) complete all as specified and directed. |
| 2 | Preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms or by road dust cleaning machie and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.(Note: Rate included for removing grass, vegitation/ scum on black top surfaces grass, root & vegetation/ scum complete to the entire satisfaction . Cleaning should be done through air compressor) |
| 3 | M&L for premix bituminous macadam with 4% binder content by weight of total mix laid/ rolled and compacted to required gradient and camber (consolidation thickness 75 mm or less) with 08 to 12 tonne power roller complete all as specified and directed. (Mix shall be from hot mix plant and spreading shall be with mechanical paver) |
| 4 | M & L for applying evenly a priming/tack coat with paving bitumen primer at 5 Kg per 10 Sqm complete all as specified and directed. |
| 5 | M & L for Bituminous premixed semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix rolled and compactyed to required camber and gradient complete with vibrator roller and 8 to 10 tonne static roller complete all as specified and directed.(Note: Mix shall be from hot mix plant spreading through mechanical paver) |
| 6 | M & L for preparing bituminous surfaces of road and marking 1.0 mm thick centre line /stop lines /dashes, arrows etc. and the like n exc 10cm width on road pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS-3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed. (Note: Thickness 1.0mm shall be exclusive of glass bends as per IRC:35) |
| 7 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 8 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 9 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 including dismantling of existing dealinator complete all as specified and directed complete all as specified and directed. |
| 10 | Demolition of cement concrete unreinforced in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 11 | Dismantling of machine pressed precast concrete interlocing paver block of any shape , any description on thickness and laid dry or laid dry and pointed in any mortar complete all as specified and directed. |
| 12 | M & L for 75mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in path/ hardstanding complete all as specified and directed. |
| 13 | M&L for machine pressed precast concrete colour interlocking paver block with grey cement and no pigment, any shape and size conforming to IS 15658:2006, 80 mm thick, M-40 Grade, complete all as specified and directed. |
| 14 | All as per Item No. 13 but relaying of old paver tiles complete all as specified and directed. |
| 15 | M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 16 | M&L for cement concrete Type B-1, 1:2:4 using 20mm graded stone aggregate as in copings, kerbs and the like including weathering, slightly rounded/chamfered angles and throating complete all as specified and directed. |
| 17 | M & L for precast cement concrete kerb stone (factory made) in M-25(Design mix) type B1, straight or curved on plan n.exc 6m mean radius and set in CM (1:4) complete all as specified and directed. |
| 18 | M & L for two coats of exterior weather laquer paint white or tinted on old painted surfaces of brick, stone, concrete, asbestos cement or plastered or unplastered complete all as specified and directed. (Note:- Painting should be done by mechanicaly) |
| 19 | M & L for scarifying or picking gravelled exc. 50mm but n. exc. 100mm deep, macadam or bituminous macadam surfaces in area exc. 400 Sqm complete all as specified and directed. |
| 20 | M&L for 75 mm thick (Compacted thickness) WBM, with course aggregate of granite trap or basalt of gading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size) spread rolled and consolidated with 8-10 tonne power roller to gradient materials and camber required complete all as specified and directed. |
| 21 | M & L Premix bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen VG-30 complete all as specified and directed. |
| 22 | M& L for Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and loose material applying evenly a tack coat with paving bitumen VG-10 @ 10kg/10 sqm of road surface, laying Semi dense bituminous premix asphaltic concrete 40mm thick consolidted thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver, and rolled to a uniform smooth surface with 8 to 10 ton power road roller to required camber and gradient, complete all as specified and directed. |
| 23 | M& L for Preparing old existing black top surfaces by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and loose material applying evenly a tack coat with paving bitumen VG-10 @ 5kg/10 sqm of road surface, laying Semi dense bituminous premix asphaltic concrete 30mm thick consolidted thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver, and rolled to a uniform smooth surface with 8 to 10 ton power road roller to required camber and gradient, complete all as specified and directed. |
| 24 | Laying of machine pressed precast interlocking paver block of any shape, any size (except tiles) with sand cushioning at same or other location with proper slope complete all as specified and directed. (Note :- Old sand to be used after screening & cleaning). |
| 25 | M & L for cement concrete type D-2, 1:4:8 using 40mm graded stone aggregae as in levelling course complete all as specified and directed. |
| 26 | M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed. |
| 27 | M & L for taking down & refixing of Precast cement concrete kerbs stone block of size of each kerb stone exc 0.009 Cum and n exc .020 Cum in road kerbs or mud stops, rounded or chamfered on edges, kneelers, apex stones, bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating incl fixing in cement mortar 1:4 and painting as required on site complete all as specified and directed. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender