Tender For Special Repairs Of Single Living Accn (Bldg No. T-116) Of 19 Weu Under Ge(N) Tezpur.
Tender Value
37.57 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
18 days left
EMD
75200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs Of Single Living Accn (Bldg No. T-116) Of 19 Weu Under Ge(N) Tezpur.
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : SPL REPAIRS OF SINGLE LIVING ACCN (BLDG NO. T-116) OF 19 WEU UNDER GE(N) TEZPUR. Contract No : GE(N)/TEZ/ OF 2026-2027 (8314) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of mangalore pattern of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc., including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. |
| 4 | S & F MS steel work in (MS round/square/rectangular pipe,angle) posts,truss ,purlin and water tank stagging including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old unserviceable existing truss of any type complete all as specified and directed. |
| 5 | Erection Fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 6 | S&F Fe 410-W (Gde-E-250) quality mild steel plate plain or chequered,5 mm thick or over in thickness including dismantling of old unserviceable existing truss of any type complete all as specified and directed. |
| 7 | S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm |
| 8 | M&L for 25 mm thick cement concrete (1:2:4) type B1 ( 20mm graded crushed stone aggregate) as in floor finished rough to receive floor finishes complete all as specified and directed. |
| 9 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.18sqm but not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) including dismantling of old unserviceable existing tile work complete all as specified and directed. |
| 10 | M&L coloured glazed ceramic tiles of size 450x350x7 mm thick, in vertical surfaces, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding layer in cement mortar (1:4) including dismantling of old unserviceable existing tile work complete all as specified and directed. |
| 11 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11sqm but not exceeding 0.18 sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) including dismantling of old unserviceable existing tile work complete all as specified and directed. |
| 12 | S & F anodised GI snap grid (Size of grid 605mm x 605mm) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing including 4 mm thick Non asbestos fibre cement building board decorative type( e-board) fixed in aluminium snap grid frame work with screws including dismantling of old unserviceable existing tile work complete all as specified and directed. |
| 13 | S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.00mm with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 14 | M&L RCC type B-1(1:2:4) nominal mix using 20 mm graded stone aggregate as in column footing including raft footings, foundation, plinth beam, bases of column etc including demolition of old unserviceable existing RCC work complete all as specified and directed. |
| 15 | M&L RCC type B-1(1:2:4) nominal mix using 20 mm graded stone aggregate as in columns, pillars etc including demolition of old unserviceable existing RCC work complete all as specified and directed. |
| 16 | M&L RCC (1:2:4) nominal mix using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc including demolition of old unserviceable existing RCC work complete all as specified and directed. |
| 17 | M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions in Square, rectangular or polygonal complete all as specified and directed. |
| 18 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. in flat surface complete all as specified and directed. |
| 19 | M&L for TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 20 | M&L for Mild steel TMT bars 6 to 8 mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 21 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams in flat surface; and similar work; vertical or to batter complete all as specified and directed. |
| 22 | M & L for AAC Block made with fine aggregates, cement and aeration agent, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6 or with chemical mortar adhesive including demolition of old unserviceable existing brick work complete all as specified and directed. |
| 23 | M&L for AAC Block made with fine aggreagates, cement and aeration agent, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 or chemical mortar adhesive, including demolition of old unserviceable existing RCC work complete all as specified and directed. |
| 24 | M & L rendering 5 mm thick in cement plaster in cement mortar (1:4) mixed with integral water proofing compound @3%by wt of cement over 10 mm thick backing coat in cm (1:4) on fair faces of brick work or AAC Block or concrete surface including taking down of old unserviceable existing plaster work complete all as specified and directed. Note : water proofing compound shall be measured and paid separately). |
| 25 | supplied only integral waterproofing liquid, ISI marked complete all as specified and directed. |
| 26 | Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks/AAC blocks including taking down of old unserviceable existing plaster work complete all as specified and directed. |
| 27 | M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection/paving finish even and smooth without using extra cement including demolition down of old unserviceable existing plaster work complete all as specified and directed. |
| 28 | M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'B' complete all as specified and directed. |
| 29 | M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded crushed stone aggregate including demolition down of old unserviceable existing plaster work complete all as specified and directed. |
| 30 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.complete all as specified and directed. |
| 31 | M&L for Granite (of any type) slab 20-25 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement with admixiture of pigment to match the shade of granite stone indluding grinding and polishing complete all as specified and directed. |
| 32 | M&L for Granite (of any type) slab 20-25 mm thick machine cut, in skirting / dado laid over cement screed and jointed with gray cement slurry and pointed with white cement with admixiture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 33 | Dismantling framed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed. |
| 34 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqm n.exe 4 sqm each complete all as specified and directed. |
| 35 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 36 | S&F for second class hardwood plain,solid,straight,chowkats and frames,wrought,framed rebated on the solid, rounded or chamfered ,put together with glue pinned at joints complete all as specified and directed. |
| 37 | S&F 2nd class softwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats complete all as specified and directed. |
| 38 | S&F Anodised aluminium frame powder coating ( Minimum thickness of powder coating 50 micron) for door,window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 39 | S&F powder coating ( Minimum thickness of powder coating 50 micron) Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and as directed. |
| 40 | S&F Factory made single extruded WPC(Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 42 | S&F of 75 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 43 | S&F Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 44 | S/F 150mm size aluminium anodised handles, cast type complete all as specified and directed. |
| 45 | S/F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 46 | S/F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 47 | S&F aluminium alloy sliding door bolt 300mm long, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 48 | S&F Sheet glass 4.0 mm thick, ordinary quality & glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and as directed |
| 49 | S&F in repair Aluminium anodised Brackets complete all as specified and directed. |
| 50 | S&F Harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed. |
| 51 | S&F 140mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 52 | S&F for 15mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed. |
| 53 | S&F for 20mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed. |
| 54 | S&F for 25mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed. |
| 55 | Laying only 15mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed.NOTE: The rate cleaning of old serviceable retrieved tubing shall deemed to be included in the quoted rate. |
| 56 | Laying only 20mm bore steel tubing 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down of old unserviceable existing GI tubing complete all as specified and directed.NOTE: The rate cleaning of old serviceable retrieved tubing shall deemed to be included in the quoted rate. |
| 57 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall |
| 58 | S&F CP cast copper alloy Stop valve 20mm bore with long shank & cup (concealed type) of any colour screwed for iron pipe & fixed. (min. weight 20mm-112gms) complete all as specified and directed. |
| 59 | S & F 15mm bore bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 60 | S & F 15mm bore stop valves/angle cock, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 61 | S&F Chromium plated shower roses 125mm size of Std quality and approved make with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 62 | S&F in repair CP tubular towel rail 600 mm long complete all as specified and directed. |
| 63 | S&F in repairs CP Soap dish complete all as specified and directed. |
| 64 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 65 | S&F Vitreous China wash basin, white, flat back, size 630x450mm (flat back or angle back type) including brackets, cutting for and pinning 'in brackets waste coupling, waste pipe, grating complete all as specified and directed. |
| 66 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 67 | S&F Waste coupling 32mm bore of PTMT (half or full threaded) min. weight 32mm-45gms) complete all as specified and directed. |
| 68 | S&F wash down water closet (pedestal pan) including connection to drain pipes and to flushing pipes anti-syphonage pipe etc excluding flushing cistern incl flush pipe, jet and seat cover complete as as specified and directed |
| 69 | S & F 10 litres PVC Syphonic action type, Flushing cistern, high level, with inlet, ball valve, float chain and pull incl flush pipe and brackets complete all as specified and directed. |
| 70 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 71 | S&F PVC connections 15mm size with PTMT nuts of length 300/450mm complete all as specified and directed. |
| 72 | S & F 110mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall, laid in trenches or floors complete all as specified and as directed. |
| 73 | S & F 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall laid in trenches or floors complete all as specified and as directed. |
| 74 | S & F PVC (SWR) bends of radius 110mm bore complete all as specified and directed. |
| 75 | S & F PVC (SWR) bends of radius 75mm bore complete all as specified and directed. |
| 76 | S & F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 77 | S & F PVC (SWR) vent cowl 75mm bore complete all as specified and directed. |
| 78 | S & F PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore complete all as specified and directed. |
| 79 | S & F PVC (SWR) junction single,(Single T) equal or unequal of radius 75mm bore complete all as specified and directed. |
| 80 | S&F 110mm dia PVC(SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed. |
| 81 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement as in repair complete all as specified and directed. |
| 82 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 83 | M&L for PCC 1:3:6 type C1 as in concrete bed to drain pipe incl packing under haunching against the sides of pipes after are laid and tested for 110mm dia pipe complete all as specified and directed. |
| 84 | M&L for applying two coat of cement based paint paint on new surface including preparation of surface incl Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 85 | M & L for preparation of new plaster surface of walls etc and applying two coats of acrylic washable distemper over 1 mm thick wall care putty in two coats over a coat of primer (smooth bodied opaque finish surface) complete all as specified and directed. |
| 86 | M & L preparation of new surface & applying two coat of synthetic enamel paint to wooden surfaces exc 10 cm girth complete all as specified and directed. |
| 87 | Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 88 | M&L for point wiring for one light point or one fan point controlled by one switch with 1.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC casing Caping medium grade of appropriate size Fitted on the surface of wall, Incl PVC Boards of proper size as per required complete with all accessories and all as specified including 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light point controlled by one switch including taking down old unserviceable point wiring complete all as specified and as directed.Note: Cost of PVC boards and other accessories are deemed to be included in the quoted rate. |
| 89 | All as per item No. 87 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. |
| 90 | All as per item No. 87 here - in - before but for 5 Amps socket point on the same board with other switches complete all as specified and as directed. |
| 91 | All as per item No. 87 here - in - before but for 15 Amps socket point with 2.5 sqmm copper conductor complete all as specified and as directed. |
| 92 | M&L in replacement for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and as directed. |
| 93 | M&L in replacement for switch piano (flush button type) single pole, one way, 15 Amps complete all as specified and as directed. |
| 94 | M&L in replacement for socket out let 2 in one in Switch socket combination, 5 Amps, 240 Volts flush type, complete all as specified and as directed. |
| 95 | S & F in replacement Socket outlet 3 pin for same board, 5A, flush type complete all as specified and as directed. |
| 96 | M&L in replacement for socket out let 2 in one in Switch socket combination, 3 Pin,16 Amps, 240 Volts flush type complete all as specified and as directed. |
| 97 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 98 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 99 | M & L in replacement of ceiling rose, polycarbonate type with three terminals complete all as specified and as directed. |
| 100 | M&L in replacement for sheet metal enclosure for DBs SPN 8 way 240 V complete double door, flush mounted all as specified and directed |
| 101 | Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SP 5 To 32 AMP complete all as specified and as directed. |
| 102 | Same as item no 12 but for SPN 32 Amp complete all as specified and as directed. |
| 103 | Supply and fixing ceiling fans in replacement complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).Old fans must be credited to MES Store complete all as specified and as directed. |
| 104 | S & F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm Complete all as specified and directed by engineer in charge.Old fans must be credited to MES Store complete all as specified and as directed. |
| 105 | Supply and draw in repairement submain wiring with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in PVC conduit of suitable size including 4 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete incl taking out old unserviceable submain wiring of any type.Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 106 | Earthing complete with galvanised steel earth plate in replacement of old earthing electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender