Tender For Special Repair To Certain Bldgs At Pattan Under Ge 969 Ews.
Tender Value
28.34 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
2 days left
EMD
56680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Bldgs At Pattan Under Ge 969 Ews.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Aug-2026 | BOQ REVISED | BOQ | 19-Aug-2026 |
| 2 | 19-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 2 | M&L Hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 3 | M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level use in brokenstone or boulder, complete all as specified and as directed. |
| 4 | M&L for Cement concrete (1:4:8) type D2 100mm thick (40mm graded aggregate stone) as in foundations filling and mass concrete 100mm thick, complete all as specified and as directed. |
| 5 | M&L for 75mm thick PCC 1:3:6 type C2 (using 20mm graded crushed stone aggregate)as use in plinth protection etc.finished even and smooth with using extra cement and making joint & filled with maxtric, complete all as specified and as directed. |
| 6 | M&L Forming 6mm thick Expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' . 50mm deep, complete all as specified and as directed. |
| 7 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cm1:4, complete all as specified and as directed. |
| 8 | M&L for Dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 9 | Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each, complete all as specified and as directed. |
| 10 | Taking down Chowkhats or frames with shutters n.exc 1.5 sq.m each, complete all as specified and as directed. |
| 11 | S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed as use 1st class softwood, complete all as specified and as directed. |
| 12 | M&L for Glazed and skeleton shutters,1st class softwood 35mm thick shutter open rebated and prepared to receive glass, gauze,etc.(without sash bars),dges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.;sizes of me-mbers of shutters as specified in SSR Part I,Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 13 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,complete all as specified and as directed. |
| 14 | S&F for Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each, complete all as specified and as directed. |
| 15 | M&L for newly wooden Surfaces painting of any description two coat of synthetic enamel paint over one coat of pink primer, not otherwise descri-bed, over 10cm width or girth, complete all as specified and as directed. |
| 16 | M&L for Old wooden Surfaces painting of any description two coat of synthetic enamel paint over one coat of pink primer, not otherwise descri-bed, over 10cm width or girth after removal of existing treatment, complete all as specified and as directed. |
| 17 | S&F for Aluminium anodised,barrel tower bolts 75mm of extruded section and fixed, complete all as specified and as directed. |
| 18 | S&F for Butt hinges, 50mm long medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 19 | S&F for Butt hinges, 50mm long medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 20 | S&F for Aluminium alloy, anodised,sliding door bolt 200mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 21 | S&F for Extruded aluminium alloy handles,size of handle in 100mm fabricated type,anodised, complete all as specified and as directed. |
| 22 | S&F for Extruded aluminium alloy handles,size of handle in 75mm fabricated type,anodised, complete all as specified and as directed. |
| 23 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 24 | M&L for Weather boarding 2nd class softwood, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 25 | Fixing Only for Weather boarding 2nd class softwood, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 26 | Dismantling timber scantlings 40 sq. cm and over in section framed work, in any position, complete all as specified and as directed. |
| 27 | M&L for Second class soft-wood clean sawn in scantlings,complete all as specified and as directed. |
| 28 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,,complete all as specified and as directed. |
| 29 | M&L for conctere type C2 (1:3:6) 40mm graded aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases),complete all as specified and as directed. |
| 30 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings,complete all as specified and as directed. |
| 31 | S&F for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 32 | Refixing for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 33 | S&F for Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275,complete all as specified and as directed. |
| 34 | S&F for old painted Surfaces of any description, not over 10cm width or girth two coat of synthetic enamel over one coat of red oxide,complete all as specified and as directed. |
| 35 | Demolition for Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets,complete all as specified and as directed. |
| 36 | M&L Veneered decorative plywood, 4mm thick grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work.as use in wall surface with cover fillets,complete all as specified and as directed. |
| 37 | M&L Veneered decorative plywood, 4mm thick grade 1 (with BWR resin) with decorative face veneers on single faces; fixed with screws to timber frame work.as use in ceiling surface with cover fillets, complete all as specified and as directed. |
| 38 | M&L Plain fillets, Square rectangular or triangular in section, clean sawn Exc 13& n.exc 25 sqm 2nd class hardwood, secured with nails or brads.incl Dismantling timber framed scantlings under 40 sq. cm in section, in any position, complete all as specified and as directed. |
| 39 | M&L for Non - skid Colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 40 | M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.as use in dados.including dismantling, complete all as specified and as directed. |
| 41 | M&L for Rendering 10mm thick in cement morter 1:4 on other then fair faces of brick work or concrete surface. Finished even and smooth with out using extra cement.including taking down cement plaster, complete all as specified and as directed. |
| 42 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia, complete all as specified and as directed. |
| 43 | S&F for 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes 20mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed. |
| 44 | S&F inrepairs Stop valves, cast copper alloy, screwed down, high pressure, butterfly handle, screwed both ends for iron pipe or for unions and fixed 20mm dia,complete all as specified and as directed. |
| 45 | S&F inrepairs complete Plug type bib taps, cast iron, screwed for iron pipe and fixed 20mm dia ,complete all as specified and as directed. |
| 46 | Dismantling water tanks and removing to store Exc 500&n.exc 1000 ltr, complete all as specified and as directed. |
| 47 | S&F Rotational moulded polyethylene water storage tanks capcity 750 litres (cylindrical vertical with closed top) hoisted and fixed in position all specified, complete all as specified and as directed. |
| 48 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates as use in vertical member. Size (50x50x6)mm.Fe 410-w Gde-E-250quality A, complete all as specified and as directed. |
| 49 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 50 | S&F inrepair for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including Demolition and breaking up drain pipes 100mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed. |
| 51 | S&F in repairs 100 mm dia PTMT Grating doom (Minimum weight 25 gms), complete all as specified and as directed. |
| 52 | S&F inrepair Vitreous China wash basin, white, flat back, size 630x450mm including brackets.waste pipe 25mm dia, and PVC connection 15mm size with PTMT nuts of length 450mm, 125 mm dia grating ,complete all as specified and as directed. |
| 53 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) alogwith plastic Seatr cover, white (excluding fixing bolts, flushing cistern and flush pipe),complete all as specified and as directed. |
| 54 | S&F inrepair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 55 | S&F in repair for PVC valveless, syphonic action type,10 liters flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC connection ,complete all as specified and as directed. |
| 56 | S&F inrepair for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern,complete all as specified and as directed. |
| 57 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,complete all as specified and as directed. |
| 58 | S&F inrepair Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed,complete all as specified and as directed. |
| 59 | S&F in repair soap dish any type fixed to plugs with chromium plated brass screw, complete all as specified and as directed. |
| 60 | S&F in repair 75 mm out let cast iron floor trap with cp gratting incl jointing to waste pipe fixed in cement concrete type B1(1:2:4), complete all as specified and as directed. |
| 61 | S&F in repair Tubular towel rail,Aluminium anodised 20mm dia, D type, 60cm long between flanges,complete all as specified and as directed. |
| 62 | S&F in repair centre hole basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe 20mm bore dia and fixed,complete all as specified and as directed. |
| 63 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. |
| 64 | Demolition of brick work or stone boulder masonary built in cement mortar, complete all as specified and as directed. |
| 65 | M&L for Pre-cast cement concrete hollow block masonry type 1:3:6 (16mm graded aggregate) as per IS 383 exc. 10 cm thick and setting in mortar 1:4,complete all as specified and as directed. |
| 66 | Providing, precast cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 67 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed. |
| 68 | Demolition cement concrete is reinforced (reinforcement cut as required to facilitate demolition),complete all as specified and as directed. |
| 69 | S&F in repair for 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joint , laid in trenches or in floors,complete all as specified and as directed. |
| 70 | M & L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4),complete all as specified and as directed. |
| 71 | M&L for Applying two coats of synthetic enamel painting to new steel surfaces based exc. 10 cm width/girth over one coat of Red oxide primer including new or previously untreated surfaces including filling with filler where reqd,complete all as specified and as directed. |
| 72 | M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6),complete all as specified and as directed. |
| 73 | M & L for preparation of undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint,complete all as specified and as directed. |
| 74 | S&F for Planed one side & edges tongued and grooved or rebated,10-12mm thick fix with nails to timber frame work incl necessary fillets size 13 & n.exc 25sqcm..as use in wall and ceiling surface with cover fillets and preparation of newly surface two coat of varnishing finishing coat with synthetic varnish.incl dismentling with fillets wall and ceilling board,complete all as specified and as directed. |
| 75 | S&F for Plain, framed, panelled shutters 35mm thick ist class softwood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats,complete all as specified and as directed. |
| 76 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft Soil,complete all as specified and as directed. |
| 77 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm,complete all as specified and as directed. |
| 78 | M&L for Rendering 10mm thick in cement morter 1:4 on fair faces of brick work or concrete surface.finished even and smooth with out using extra cement,complete all as specified and as directed. |
| 79 | M&L for Rendering 15mm thick in cement morter 1:4 on other than fair faces of brick work or concrete surface.finished even and smooth with out using extra cement,complete all as specified and as directed. |
| 80 | M&L for granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including,complete all as specified and as directed. |
| 81 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations,complete all as specified and as directed. |
| 82 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m,complete all as specified and as directed. |
| 83 | Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. |
| 84 | M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqmm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor. |
| 85 | (a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way |
| 86 | (b) One 3 pin 5 Amp switch socket outlet on independent board |
| 87 | (c) One 3 pin 5 Amp switch socket outlet on same board with accessories |
| 88 | M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor. |
| 89 | S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed |
| 90 | S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed |
| 91 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and as directed |
| 92 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed. |
| 93 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed |
| 94 | S&F in repairs Distribution Board, SPN 8 Way, Double door complete all as specified and as directed |
| 95 | S & F in repairs MCB,DP 40 Amps 240 Volts B curve, complete all as specified and as directed |
| 96 | S & F MCB Single pole 6-32A Amps 240 Volts B Curve complete all as specified and directed |
| 97 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed |
| 98 | S& F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and as directed. |
| 99 | Supply and fixing Inverter type LED bulb 12 W, 220V,complete all as specified and as directed. |
| 100 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and as directed. |
| 101 | S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting,complete all as specified and as directed. |
| 102 | S&F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet,complete all as specified and as directed. |
| 103 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm,complete all as specified and as directed. |
| 104 | Supply & fixing in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan,complete all as specified and as directed. |
| 105 | Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm , 2 Core,complete all as specified and as directed. |
| 106 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc. |
| 107 | Supply & Fixing in repair Modular switch single pole one way 6 Amps 1 module 240 V,complete all as specified and as directed. |
| 108 | Supply & Fixing in repair Modular Switch Single pole one way 16A, 240 V,complete all as specified and as directed. |
| 109 | S&F white cover plate with frame, 2 Module for point,complete all as specified and as directed. |
| 110 | S&F white cover plate with frame, 4 Module for point,complete all as specified and as directed. |
| 111 | S&F white cover plate with frame, 6 Module for point,complete all as specified and as directed. |
| 112 | S&F in repairs Distribution Board, SPN 12 Way, Double door complete all as specified and as directed |
| 113 | S & F in repairs MCB, DP 63 Amps 240 Volts B curve, complete all as specified and as directed |
| 114 | Supply & Fix SMD LED panel recess/surface suspended mounting 22 watt 1' x 1' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50Hz,complete all as specified and as directed. |
| 115 | Supply and fix modular fan step regulator,120 Watt - 2 module,complete all as specified and as directed. |
| 116 | Note:- Schedule of credit Rs 58,430.40 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 26, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender