Tender For Construction Of Staff Quarter For Rdd At Agling Scheme: Ssp Adv. Cost: 65.76Lacs (Excluding Gst)
Tender Value
65.76 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
9 days left
EMD
1.31 Lakhs
Bank guarantee accepted
Document Fee
660
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Staff Quarter For Rdd At Agling Scheme: Ssp Adv. Cost: 65.76Lacs (Excluding Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Earthworkinsurfaceexcavationnotexceeding30cmindepthbutexceeding1.5minwidthaswell as 10 sqmonplan includinggettingout anddisposal ofexcavatedearthupto50mand lift upto1.5m, as directedbyEngineer-inCharge:2.1.1 All kinds of soil |
| 2 | Earthworkinexcavationbymanualmeans infoundationtrenchesordrains(notexceeding1.5minwidthor10sqmonplan), includingdressingof sidesandrammingofbottoms, liftupto1.5m, includinggettingouttheexcavatedsoilanddisposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1 All kinds of soil. |
| 3 | Providing and laying dry stone soiling any thickness incl. cost of stone |
| 4 | Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)) |
| 5 | Providing and laying 80mm thick faciory made cement in required colour andpattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge |
| 6 | Providing and laying at or near ground level factory made kerb stone of M 25 grade cement concrete in position to te required line level adarvature joint with cement mortor (1:3) complete job. |
| 7 | Steel work welded in builtup sections/framed work, including cutting,hoisting, fixing in position and In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shadewith ordinary paint of approved brand and manufacture |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm |
| 11 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. |
| 12 | Providing and fixing Float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm). |
| 13 | Providing and fixing 18mm thick ply board with best quality of sun maker bothside board incl. placing in position incl cost of hinges, handle, lock etc for kitchen shelf and alimirah complete job. |
| 14 | Marble work gang saw cut (polished and machine cut) of thickness 18mm forwall lining (veneer work),backing filled with a grout of average 12mm thick incement mortar1:3 (1cement : 3coarsesand), including pointing with whitecement mortar 1:2 (1white cement : 2marble dust) with an admixture ofpigment tomatch the marble shade (To be secured to the backing by means ofcramps, which shall be paid for separately). |
| 15 | Providing and laying Vitrified tiles in different sizes (thickness to be specified bymanufacturer), with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing withgrey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement& matching pigments etc. complete.Size of Tile 500x500 mm |
| 16 | Providing and fixing 12mm thick pre laminated flooring af approved brand complete job. |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 19 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 20 | Supply of king size bed without storage with uphosting premium fabric backside using 18mm board and wood using best quality complete job. |
| 21 | Supply and fixing wooden carpet of best quality with 12mm thick therma coal complete job. |
| 22 | Supply of sofa set 5 seater fabric best quality complete. |
| 23 | Supply wooden easy chair with fabric best quality complete |
| 24 | Supply wooden table with 5mm glass pain at top best quality complete. |
| 25 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Make Havells life line life guard /Anchor/ Polycab) Group A |
| 26 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire |
| 27 | 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire |
| 28 | 2 x 4 sq. mm + 1 x 4 sq. mm earth wire |
| 29 | 2x 10 sq. mm + 1 x 6 sq. mm earth wire |
| 30 | 2x 16 sq. mm + 1 x 6 sq. mm earth wire |
| 31 | 1 x 1.5 sq. mm for inverter |
| 32 | 12 W CEILING MOUNTED LED LIGHT |
| 33 | 20 watt LED tube light fitting |
| 34 | 100 Watt street light |
| 35 | P/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required.(Make: Havells USHA/Anchor/Bajaj) |
| 36 | S/F following size/module, GI box along with modular base and cover plate for modular switches/sockets in recess etc. as required: (Make: Havells Crabtree/Legrand/Greatwhite/Anchor/CONA/Gold medel) 1 or 2 Module (75 mmX75 mm) |
| 37 | 3 Module (100mmX75mm) |
| 38 | 4 Module (125mmX75mm) |
| 39 | 6 Module (200mmX75mm) |
| 40 | S/F following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. (Make: Havells Crabtree/Legrand/anchor/Greatwhite/CONA/Gold medel) 6/10 A switch |
| 41 | 3 pin 5/6 A socket outlet |
| 42 | 15/16 A switch |
| 43 | 6 pin 15/16 A socket outlet |
| 44 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 8 WAY (2+24) TPN MCB Board |
| 45 | 6 WAY (2+24) TPN MCB Board |
| 46 | S/F of 5 Amps to 63 Amps, 240/415V, “B series, ISI Mark” miniature circuit breakers suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required: (Make: Havells/anchor/C&S/V Guard) single pole 6/10 A, 16/20 A DP MCB |
| 47 | Double pole 63A DP MCB |
| 48 | Four pole 63A, TPN |
| 49 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm |
| 50 | Main Panel LTSITE of 250 A Bus bar Chamber with Incomer MCCB and Circuit breaker having the following specification TPN Aluminum Bus bar size: 30mm x 10mm with colour coded PVC Sleeves: (Take Bus-Bar Density:08A/ mm)Incomer : 250 Amp 4p,35KA MCCB ………….. 01 NoOutgoing: 63 Amp DP Isolator…………………....03 No Outgoing: 63 A, TPN ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,03 NoVoltage Amps frequency Digital Meter ………01 setCT Ammeter 200 Amps ………………………….01 setR Y B Indication light …………………………….. 01 set Changing Over 250 Amp, FP …………………………….. 01 No |
| 51 | Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE Aluminium Power Cable of following sizes on surface/surface cable tray/0.50 mtr bleow ground level etc. as required including carriage upto site of work. (Make as per annexure enclosed) 95 sqmm 3.5 core-Armoured XLPE |
| 52 | Supply, installation, testing & commissioning of GI Electrode Earthing with 84mm dia and 3 meter length, with 40mm x 6mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover. |
| 53 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 54 | Providing and fixing 25 Litre Geyser including carriage. All complete job |
| 55 | Providing and Fixing instant water heater 3 litres including carriage and all complete Job |
| 56 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 57 | Transportation of boring equipment /machines/tools and plants to the new site of bore works. Fixing of complete camp by way of erecting of equipment, machine, tools accessories, attachment, fixing of tents for labours and stacking of required material at bore site. The job also includes leveling of the ground drilling machines and other transportation of POL etc. |
| 58 | Providing/ Drilling of 137mm dia bit using ODEX method as per site condition up to the required depth in well collapsible strata /conglomerate boulder/gravel/clay /pebbles/rock etc whatever encounter in strata .including cost of casing pipe consumable store, bits, pol.etc with the system of simultaneously lowering of 100 mmdia ID MS casing pipe of 5-8mm thickness which shall be welded together |
| 59 | Design,supply and installation testing and commisioning of 2.0HP submersible pump, set make of crompton etc gravence head capicity 90mtr fischarge =1.5 LPS with electric panel 240v 50cycle for single phase and safly cable wire 100mtr also include 5kve service stablizer. The job also include any other civil/mech item requried to make the system functional. |
| 60 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. |
| 61 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 62 | Providing and fixing mirror of superior glass (ofapproved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 63 | Providing and fixing C.P Brass toilet paper holder |
| 64 | Providing and fixing of Soap Dish (C.P Brass) with brackets etc |
| 65 | Providing and fixing brass bib cock of approved quality. 15mm nominal bore. |
| 66 | Providing and fixing flow trap of PVC . |
| 67 | Providing and fixing floor jail. |
| 68 | Providing and fixing soil, waste and vent pipes 110mm dia PVC. |
| 69 | Providing and fixing soil, waste and vent pipes 90mm dia PVC. |
| 70 | Providing and fixing of PPR pipe complete with PPR fitting and damps including cutting and making good the walls etc internal complete. 25mm |
| 71 | Providing and fixing of PPR pipe complete with PPR fitting and damps including cutting and making good the walls etc internal complete. 50mm |
| 72 | Providing and fixing of PPR pipe complete with PPR fitting and damps including cutting and making good the walls etc internal complete. 32mm |
| 73 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and color. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 74 | Providing and fixing of plain bends of required degree.110mm dia PVC. |
| 75 | Providing and fixing of plain bends of required degree.90mm dia PVC. |
| 76 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 77 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 78 | Providing and placing on terrace (at all floor level) polyethylene water storage tankISI:12701 marked indicating the BIS License NO. with cover and suitable locking arrangment and making necessary holes for inlet ,outlet and overflow pipes with fittings and the base supporty for tank (sintex,electroplast, star,lotus or equivalent having valid ISI License) |
| 79 | Providing and fixing of of material for the insulation of water storage tank of with nitrile sheet tapping with cello tape ,rockwood 6inch per side ,wire mesh ,polythene , alumium sheet 26 gauge cladding with dia of complete job .19mm thick nitrile sheet |
| 80 | Providing and fixing of material for the insulation of pipe with nitrile tube ,tapping with cello tape ,rockwood 6 inch per side wire mesh polythene ,tapping with cello tape almunium sheet 26 guage cladding with dia complete job.incl. carragie 32mm |
| 81 | Providing and fixing of material for the insualtion of pipe with nitrile tube , tapping with cello tape for inner wall fitting complerte job incl carraige 19mm thick 50mm dia (OD) (PPR 25MM) |
| 82 | Providing and fixing heat tape 33 watt on PPR pipes made of denforced or chromelox or equivalent make as approved by Engineer in charged complete job. |
| 83 | Providing anf fixing of exo fan with complete job. |
| 84 | Providing and fixing Stainless Steel AISI304(18/8) kitchen sink as per IS13983with C.I. brackets and stainlesssteel plug 40mm including painting offittings andbrackets, cutting and making good the walls wherever required:17.10.1 Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm. |
| 85 | Supply of heating panelling wall hanging 200 watt incl. placing in position complete job. |
| 86 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 5 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender