Tender For Construction Of 11 Kv Line For Providing Power Supply To M/S Jaganath Engineering Maritime Service Pvt. Ltd. At Talasing Msme Park Under Garabandha Electrical Section, Gajapati.
Tender Value
9.60 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
6 days left
EMD
9600
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 11 Kv Line For Providing Power Supply To M/S Jaganath Engineering Maritime Service Pvt. Ltd. At Talasing Msme Park Under Garabandha Electrical Section, Gajapati.
BOQ
| Sl. No. | Item Description |
| 1 | Cost of Matterial for Construction of 3Ph 3W 11KV line =0.69CKm,Cut point=06 nos,Guarding-02 |
| 2 | Supply ( of all reqd. Materials ), Erection, testing & commissioning of 11mtrs long WPB (160 x 152mm) (30.44 KG/Mtr) Pole with base plate 300x300x12 and Excavation of pole pit in all kind of soil and rock up to a depth of 1.8 mtr from ground level & installation with mass Concreting of poles in ratio 1:1.5:3 (500mmX500mm X1800mm) = 0.450Cu.mtr & couping of poles in ratio 1:1.5:3 (500X500X450)= 0.1125 Cu mtr with necessary curing.complete in all respect with curing & as per approved technical specification & direction of EIC. |
| 3 | Supply & installation of Earthing of support (coil type). complete as required & as per approved technical specification & direction of EIC. |
| 4 | Supply & installation of No-8 GI wire (dia-4.6 mm) 0.131 Kg/Mtr, 2 Mtr for connecting pole with coil earthing. complete as required & as per approved technical specification & direction of EIC. |
| 5 | Supply & installation of 11KV MS V-Cross arm(10.2KG each) with G.I Back Clamp for V cross arm(0.85 KG each). complete as required & as per approved technical specification & direction of EIC. |
| 6 | Supply & installation of 11KV MS F-Clamp (Pole Top Bracket) (2.9KG). complete as required & as per approved technical specification & direction of EIC. |
| 7 | Supply & installation of 100x50x6 mm GI channel for straight Cross arm 1.45 mtr 9.2 Kg/mtr (8 nos) including top piece. complete as required & as per approved technical specification & direction of EIC. |
| 8 | Galvanisation of all RS and MS materials. complete as required & as direction of EIC. |
| 9 | Supply & installation of 11 KV Disc Insulator (T & C) Type 45 KN POLYMER. complete as required & as per approved technical specification & direction of EIC. |
| 10 | Supply & installation of 11 KV hard ware fitting (T & C) Type 45 KN. complete as required & as per approved technical specification & direction of EIC. |
| 11 | Supply & installation of 11KV Pin Insulator(POLYMER). complete as required & as per approved technical specification & direction of EIC. |
| 12 | Supply (of all reqd. Materials ) ,Erection, testing & commissioning of HT Stay Set complete including excavation of stay pit in all kind of soil and rock as required with GI HT Stay Set, Stay Clamp , Stay Insulator & 7/10 GI stay Wire Grade-2 & Concreting (1:2:4) of Stay Anchor plate of size (0.5x0.5x0.8)=0.2 Cu. Mtr. complete with curing as required & as per approved technical specification & direction of EIC. |
| 13 | Supply & Stringing of 55 mm² AAA conductor. complete as required & as per approved technical specification & direction of EIC. |
| 14 | Supply & installation of PG Clamp for 55mm2 conductor. complete as required & as per approved technical specification & direction of EIC |
| 15 | Supply & installation of Fish Plate 50x6 mm, 2.36 Kg/ Mtr, each 0.280 Mtr Length. complete as required & as per approved technical specification & direction of EIC. |
| 16 | Supply and installation of Danger Plate using GI Back clamp (Pole-clamp) made of 25x3 mm flat flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510). complete in all respect as per approved technical specification and direction of E.I.C. |
| 17 | SITC of Anticlimbing Device using GI barbed wire (3kg per support) with Back Clamp (25X3 mm GI flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)). complete in all respect as per approved technical specification and direction of E.I.C. |
| 18 | Supply & fixing of G.I Nut, Bolt & Washers of assorted size. complete in all respect as per approved technical specification and direction of E.I.C. |
| 19 | Supply and painting of Black paint as required and direction of EIC. |
| 20 | Supply and painting of Yellow colour paint for background as required and direction of EIC. |
| 21 | Sundries (Binding wire, Insulating tape, pole numering etc). complete as required & as per direction of EIC.. |
| 22 | Cost of Matterial for 11KV DP with AB Switch-1 nos |
| 23 | Supply ( of all reqd. Materials ), Erection, testing & commissioning of 11mtrs long WPB (160 x 152mm) (30.44 KG/Mtr) Pole with base plate 300x300x12 and Excavation of pole pit in all kind of soil and rock up to a depth of 1.8 mtr from ground level & installation with mass Concreting of poles in ratio 1:1.5:3 (500mmX500mmX 1800mm) = 0.450Cu.mtr & couping of poles in ratio 1:1.5:3 (500X500X450)= 0.1125 Cu mtr with necessary curing.complete in all respect with curing & as per approved technical specification & direction of EIC. |
| 24 | Supply, fabrication, Erection, testing & commissioning of GI structural Members for DP structure: a)-Top Pressure GI Channel (100x50x6) 2.8mtr long 2 Nos (9.2kg/mtr) .b)-(75x40x6mm chanel (GI) for bracing 2.8Mtr,2Nos)(6.8Kg/Mtr).c)-50x50x6mm angle (GI) for bracing, 3mtr long, 2Nos. 4.5kg,/mtr) (total 6mtr long).d)-AB Switch mounting channel (GI) (75x40x6mm, 2.8Mtr, 2Nos (6.8Kg/ Mtr).e)- AB Switch side support channel 100x50x6mm, 9.2 Kg/ Mtr, each channel length 0.35M, 2nos channel required. f)- Channel support for down pipe 75x40x6mm, 6.8Kg/mtr, each channel length 0.8Mtr, 1No Complete in all respect as per approved technical specification & direction of EIC. |
| 25 | SITC of 11 KV,3-Pole 400A Line AB Switch. complete as required & as per approved technical specification & direction of EIC. |
| 26 | Supply & installation of 11 KV Disc Insulator (T & C) Type 45 KN POLYMER. complete as required & as per approved technical specification & direction of EIC. |
| 27 | Supply & installation of 11 KV hard ware fitting (T & C) Type 45 KN. complete as required & as per approved technical specification & direction of EIC. |
| 28 | Supply & installation of 11KV Pin Insulator(POLYMER). complete as required & as per approved technical specification & direction of EIC. |
| 29 | Supply & installation of PG Clamp for 55mm2 conductor. complete as required & as per approved technical specification & direction of EIC |
| 30 | Supply & installation of Fish Plate 50x6 mm, 2.36 Kg/ Mtr, each 0.280 Mtr Length. complete as required & as per approved technical specification & direction of EIC. |
| 31 | Supply & installation of 12 KV 10 KA 11 KV Lighting Arrestor. complete as required & as per approved technical specification & direction of EIC. |
| 32 | Supply (of all reqd. Materials ) ,Erection, testing & commissioning of HT Stay Set complete including excavation of stay pit in all kind of soil and rock as required with GI HT Stay Set, Stay Clamp , Stay Insulator & 7/10 GI stay Wire & Concreting (1:2:4) of Stay Anchor plate of size (0.5x0.5x0.8)=0.2 Cu. Mtr. complete with curing as required & as per approved technical specification & direction of EIC. |
| 33 | Earth Pit : Supply (of all reqd. Materials ) ,Erection, testing & commissioning of pipe earth electrode made out of 40 mm dia class-B G.I Pipe of 3 mtr. Long with arrangements for fitting and termination of G.I Flat (25x6) mm 1.2 kg/Mtr with G.I nut-bolts and washers including cost of excavation of earth pit in all kind of soil & rock, filling with burnt wood charcoal, salt & soft soil and making brick masonry chamber with removable RCC cover complete as per approved technical specification and direction of E.I.C. |
| 34 | Supply & installation of Earthing of support (coil type). complete as required & as per approved technical specification & direction of EIC. |
| 35 | Supply & installation of No.8 GI wire (dia - 4.6mm) 0.131Kg/Mtr, 2 Mtr for connecting pole with coil earthing. complete as required & as per approved technical specification & direction of EIC. |
| 36 | Supply and installation of Danger Plate using GI Back clamp (Pole-clamp) made of 25x3 mm flat flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510). complete in all respect as per approved technical specification and direction of E.I.C. |
| 37 | SITC of Anticlimbing Device using GI barbed wire (3kg per support) with Back Clamp (25X3 mm GI flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)). complete in all respect as per approved technical specification and direction of E.I.C. |
| 38 | Supply & fixing of G.I Nut, Bolt & Washers of assorted size. complete in all respect as per approved technical specification and direction of E.I.C. |
| 39 | Supply and painting of Black paint as required and direction of EIC. |
| 40 | Supply and painting of Yellow colour paint for background as required and direction of EIC. |
| 41 | Sundries (Binding wire, Insulating tape, pole numering etc). complete as required & as per direction of EIC. |
| 42 | Cost of Survey of increamental / delta network and assets changes of 11 KV network and updation in GESW database as per direction of E.I.C. |
| 43 | N.B: The bidders are required to Quote theire rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender