Housing Urban and Rular Development Government Departments Closing in 11 days TDR #56727441

Tender For Construction Of Administrative Building At Ofdra C Us Bhubaneswar, Khurda.

Issued by Government Departments · Khordha, Odisha
Tender Value
13.90 Crore
Estimated cost
Bid Submission
12 Aug 2026
11 days left
EMD
13.90 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Administrative Building At Ofdra C Us Bhubaneswar, Khurda.

BOQ

Name of Work:- Construction of Administrative Building at OFDRA C us Bhubaneswar, Khurda.
Sl. No. Item Description
150000001Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth.Ground Floor
250000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
350000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
45000002012mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
5First Floor
6Second Floor
7Third Floor
8Forth Floor
9Fifth Floor
10500000216mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces.Ground Floor
11First Floor
12Second Floor
13Third Floor
14Forth Floor
15Fifth Floor
165000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
17First Floor
18Second Floor
19Third Floor
20Forth Floor
21Fifth Floor
2250000023\\"Priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc.complete. \\"(FOR OUTSIDE)Ground Floor
23First Floor
24Second Floor
25Third Floor
26Forth Floor
27Fifth Floor
2850000025\\"Wall painting two coats with plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. \\"Ground Floor
29First Floor
30Second Floor
31Third Floor
32Forth Floor
33Fifth Floor
3450000035\\"providing & fixing ceramic tiles of approved size in dado & skirting over cement plaster 1:3, 12mm thick jointed with with neat white cement slurry including cost of all material labour T & P etc.complete. \\"Ground Floor
35First Floor
36Second Floor
37Third Floor
38Forth Floor
3950000036\\" Floor Tile flooring over cement plaster 1:1 25mm. thick bed with cost of all materials, labours T & P etc.complete. \\"Ground Floor
40First Floor
41Second Floor
42Third Floor
43Forth Floor
4450000057Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height.Ground Floor
45First Floor
46Second Floor
47Third Floor
48Forth Floor
49Fifth Floor
5050000063\\" One coat of priming with approved primer over new wood work. \\"Ground Floor
51First Floor
52Second Floor
53Third Floor
54Forth Floor
55Fifth Floor
5650000071\\"2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard grinite chips on new work including cost of labour,material,T&P etc all complete. \\"Third Floor
57Forth Floor
58Fifth Floor
5950000076Plinth protection with side brick masonry wall (1:4) inside sand filling over which 100 mm thick cement concrete using 40 mm coarse aggregate in prop (1:3:6) and over that, 50 mm thick cement concrete using 12mm to 19mm coarse aggregate in prop (1:2:4) with cement plastering (1:4) in proper slope.Ground Floor
6050000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
6150000490Fly Ash brick masonry in cement mortar 1:6 (1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg. per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure.Ground Floor
62First Floor
63Second Floor
64Third Floor
65Forth Floor
66Fifth Floor
6750000495Fly Ash brick masonry in cement mortar 1:4 (1 cement:4sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75 kg per sq. cm with dimensional tolerance +/-2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Superstructure.Ground Floor
68First Floor
69Second Floor
70Third Floor
71Forth Floor
7250000742\\"Painting two coats of Anti-fugal weather coat water proofing paint including scaffolding and cleaning the surface before application. \\"Ground Floor
73First Floor
74Second Floor
75Third Floor
76Forth Floor
77Fifth Floor
7850000884\\"Enamel painting two coats including cost of all materials cleaning,brushes,putty etc. \\"Ground Floor
79First Floor
80Second Floor
81Third Floor
82Forth Floor
83Fifth Floor
8450000964Providing and Fixing of Granite Flooring in floors, Treads and Landings over 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shades of the Granite including cleaning etc.Ground Floor
85First Floor
86Second Floor
87Third Floor
88Forth Floor
89Fifth Floor
9050001152Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge.Ground Floor
91First Floor
92Second Floor
93Third Floor
94Forth Floor
95Fifth Floor
9650001646Aerated Autoclaved Fly Ash bricks / masony in fillers / inside walls using A.A.C blocks of size 625 x 200 x 200 mm having compressive strength more than 4n/mm^2 confirming to IS:2185-part-3-2005 & IS:6114-1972 of Aero Len / Aerolite or equivalent products in cement mortar of mix (1:6) with ordinary portland cement and screened & washed sand for mortar for use in superstructure including splay cutting ,circular moulding,corbelling,champering and similar such type of works,watering & curing etc.,including cost,conveyance ,royalty,loading,unloading,taxes of materials,cost of labour,scaffolding,sundries,T & P required for the work etc. complete in all respect as directed by the E.I.C .First Floor
97Second Floor
98Third Floor
99Forth Floor
10050001694Supplying, fitting & fixing of Vetrifed Tile in floors of size 600mm x 600mm (colour / printed series)of approved make conforming to IS : 13755 laid on 20 mm thick cement mortar and filling joints with white cement of approved quality including cost of all materials, labour T &P etc required for the works all complete as per direction of Engineer -in- charge. (For new work only)Ground Floor
101First Floor
102Second Floor
103Third Floor
104Forth Floor
1055000171912mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.Ground Floor
10650001782Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement propertion(3:1), including cleaning before pouring 12mm to 25mm and 15 cm depth.Fifth Floor
10750002518Providing & Cutting bushes and leveling the grounding by back end loader (JCB), shifting the debaries 5 km from the site and as per the instruction of EIC.Ground Floor
10850004868\\"Providing and fixing of Wooden ceiling system using with 12mm ply and finish with laminate (basic rate of laminate = ₹55/Sft) including melamine polish.Frame with ceiling angle of width 25mmx10mm fixed to siffit with GI cleatand steel expansion fasteners. Then Gypsteel\\"\\" ULTRA CRP surface ribbed ceiling section of having web of 51.5mm anf two flages of 26mm each with lips of 10.5mm are then fixed with Gypsteel\\"\\". ULTRA intermediate channel will fix with the help of connecting clip and in direction perpenducular to the Gypsteel at 457mm centres excluding GST and should be completed in all respect as per direction of Architect/Engineer-in-Charge.(N.S.W.I) \\"First Floor
10950006661\\"Providing and fixing suspended Grid ceiling system with (Armstrong/or equivalent make size Optra Board 600mm X 600mm with humidity resistance of 99%. Sihoutte reveal profile grip system with 15mm while flanges incorporation a 3mm or 6mm central recess. Main runner should be spaced at 1200 mm c/c securely fixed to the structural soffit by approved hangers at 1200mm maximum center and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greated than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centers to from 1200X600mm module. 600X600mm module to be formed by fitting 600mm long cross tees to have central birdsmouth notches to facilitate fitting of 600mm cross tees. Wall angles in white colour to be secured to walls at 450mm maximum centres as per the direction of engineer-in-charge. \\"Second Floor
110Third Floor
11150007923Supplying,fitting & fixing of Stainless steel aquare pipe using 50X50X2.5MM size square pipe with vertical post and one horizontal rail and grade of size 30X30X2.5MM size square pipe as per approved design and specification, buffing,polishing etc with cost,conveyance of all materials, labour,T&P etc required for the complete in all respect.[JINDAL/NIPPON STEEL]First Floor
112Second Floor
113Third Floor
114Forth Floor
11550010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
116First Floor
117Second Floor
118Third Floor
119Forth Floor
120Fifth Floor
12150010518Supplying fitting fixing of GRG ready made cornices of 100 mm thick including screw and adhesive to all the cornices. Make:-Aerolite/Ramco Hilux board .Ground Floor
122First Floor
123Second Floor
124Third Floor
125Forth Floor
12650010542Providing, Fitting and Fixing of three track (122mmx 54mm) height below 1.5 Mtr.UPVC glazed sliding window Premium quality with frames and sashes shall be from white UPVC profile. All section of frame and sashes shall be reinforced with galvanized steel in single continuous length, holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes, window shall be such that glazing or deglazing on site possible without the need to remove the outer frame from the structure of the building. Glazing must be used 5mm thick reflective toughened glass with weather seal. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap in between the frame and wall should be filled with silicon sealant for inner frame sealing complete with all fixtures in all respect. UPVC Window make:-DUROPLAST / SIMTA ASTRIX / NCL VEKA, All GLASS work:- Saint-Gobain/AIS (ASAHI).Ground Floor
127First Floor
128Second Floor
129Third Floor
130Forth Floor
13150010554Providing, supplying and fixing of UPVC Glazed Fixed Louvered Ventilator of size 600 mm X600 mm made out of multi chambered UPVC of DUROPLAST / SIMTA ASTRIX / NCL VEKA having isolated drainage, holes about 8 mm dia. to be provided @ 300 mm C/C outer side of lower sashes and reinforced with Galvanized Iron profiles throughout the window with Fan(185mm)of USHA / CROMPTON/Havells/Anchor. The outer frame having an overall size of 39 mm x 39 mm x 2.2 mm thickness with reinforcement of 1.2 mm . Ventilator shall be provided with 4 mm Pin Head glass, standard hardware. Wall thickness of frame and Mullion shall be 2.4 mm, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work with transportation and wastage.First Floor
132Second Floor
133Third Floor
134Forth Floor
13550010620Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY)Ground Floor
136First Floor
137Second Floor
138Third Floor
139Forth Floor
140Fifth Floor
14150010716Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing.Ground Floor
142First Floor
143Second Floor
144Third Floor
145Forth Floor
146Fifth Floor
14750010827Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL.Ground Floor
148First Floor
149Second Floor
150Third Floor
151Forth Floor
15250010839Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX.Ground Floor
153First Floor
154Second Floor
155Third Floor
156Forth Floor
157Fifth Floor
15850010915Providing, fitting and fixing of Gypsum false ceiling with Aluminium anodised T section no. 3215 with 2feet center to center, L section no. 1705 up to 15 microns on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2 feet x 2 feet suspended from ceiling etc. complete including cost of 12.5mm thick Gypsum board, all labour and material etc. complete. Aluminium Sections make:- FINESTA/HINDALCO/JINDAL, Gypsum board Make:- India Gypsum (SAINT GOBAIN) / USG Boral .Ground Floor
159First Floor
160Second Floor
161Third Floor
162Forth Floor
16350011579Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC ROOF SLAB)Ground Floor
164First Floor
165Second Floor
166Third Floor
167Forth Floor
168Fifth Floor
16950011592Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC COLUMNS)Ground Floor
170First Floor
171Second Floor
172Third Floor
173Forth Floor
174Fifth Floor
17550011604Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC SILL BAND)Ground Floor
176First Floor
177Second Floor
178Third Floor
179Forth Floor
18050011616Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING)Ground Floor
18150011628Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR LINTEL BEAM).Ground Floor
182First Floor
183Second Floor
184Third Floor
185Forth Floor
186Fifth Floor
18750011640Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR RCC CHHAJA & SHELVES).Ground Floor
188First Floor
189Second Floor
190Third Floor
191Forth Floor
192Fifth Floor
19350011652\\"Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC STAIRCASE).Ground Floor
194First Floor
195Second Floor
196Third Floor
197Forth Floor
19850011664Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR TIE BEAM).Ground Floor
19950011676Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR RCC FLOOR BEAMS).Ground Floor
200First Floor
201Second Floor
202Third Floor
203Forth Floor
204Fifth Floor
20550011700Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS).Ground Floor
20650011926Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF)Ground Floor
207First Floor
208Second Floor
209Third Floor
210Forth Floor
21150012623Providing & applying of pre constructional anti-termite treatment Confirming to IS 6313 (Part-II) and creating chemical barrier under and around the column pits, wall trenches, basement excavation top surface of plinth filling, junction of wall and floors along with external perimeters of building, expansion joints, surrounding the pipes and conducts etc. at the rate at 7,5 liter per sqm on vertical surface and 5.0 liter per sqm on horizontal surface. Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per lit of water cost of all materials, labour ,conveyance, T&P , all taxes and hire charges of machinaries as per direction. Treatment at Junction of the inner wall and the floor ,Treatment of Top Surface of Plinth Filling , External Perimeter of building. (Make :- HI-Solution or Smart Care )Ground Floor
21250012625Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM . All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following: 4 nos Hinges on each leaf 1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock 1 Set D-type pull handle back to back on each leaf 1 no Concealed flush bolt in inactive leaf of Double door, if any 1 no vision glass on each leaf Fastners as required. The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect. (Make :-TATA Pravesh)Ground Floor
213First Floor
214Second Floor
215Third Floor
216Forth Floor
21750012675Providing and fixing Glass Fiber Reinforced Concrete (G F.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 1 – 3 Kg per Sq. Ft. and color of UniStone make or Brilla. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from BRILLA, Quartz, Fine Silica Sand, Alkali Resistant, Fire rated Glass Fiber manufactured by ‘N.E.G JAPAN’ , Super Plasticizers manufactured by ‘BASF’ and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ . The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.(Make-Unistone)Ground Floor
218First Floor
219Second Floor
220Third Floor
221Forth Floor
22250012734Expansion Construction Joint Treatment:Supply and installation of SealArm waterbar RS 800 on stater joint and construction joints ho rizontally & vertically with adhesive ). It’s a ReSwellable Hydrophilic Water bar & SealArm Waterbar RS 800 is a well-developed joining strip which is very economic and safe to use, compared to usual joint sealing methods. The necessary construction j oints can be worked out frictionally and pressure water tight up to 3 bars. Make:- OTC / Radiant / OCBREFifth Floor
22350012752Providing and Fixing of Knauf Optra Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%.InstallationAn appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm and 4 nos. in case of 600x1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Knauf Optra Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained. (Make :Knauf celing Solution)Third Floor
22450012758Supply ,providing & making of Frameless glass partitionand glass door (Asahi, St gobain) make of DORMA or equivalent fittings DORMA or Geze XL-C-4002A Fanlight(9137502) patch ,DORMA XL-C-4006A Central (Connector(9137504) ,DORMA or equivalent XL-C 4051 Glass DoorPackage1.5*2.55mtr 45577.with LOck(9137880) ,DORMA XL-C 3000A H TYPE 400MNx22MM(9125521) with 12mm thickness toughened itched glass with clear silicone . The whole work to be finished with all materials, labour etc complete with all hardwares in all respect. (Make :- Dorma / Geze)Ground Floor
22550014336Supplying, fitting and fixing of ALUMINIUM COMPOSITE PANEL(ACP) made out of aluminium section no B-9835 as horizontal and vertical members placed spacing 2' center to center and fixing with 3mm thick ACP as per colur, design, specification complete including cost of materials, labour, transportation etc complete in all respect. [N.S.W.I]Fifth Floor
22650014825Supplying,fitting and fixing of powder coated Aluminium framed AHPL sheet door (High pressure laminate) having 60-70% paper & 30-40% plastic resin.The core layers are made of phenol-formaldehyde resin and the top layer is made from melam ine-formaldehyde resin.It is soluble in water,methanol,diethyle -ether,n-Octanol etc.like organic agents.The fire resistant is upto 400 degree celcious this is purely based on Europian standard EN438.The thickness ofthe HPL take as 4mm fixed with aluminium channelby silicon sealant.This door includes all hardware fittings cost of all materials ,labour ,tranportation,loadng,unloading wastage etc all complete in all respect.(Make-Al channel-Hindalco/Jindal,AHPL sheet-VIVA/Alu Decor)Ground Floor
227First Floor
228Second Floor
229Third Floor
230Forth Floor
23150015704Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, desi gn, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC.Ground Floor
23210000556Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200cfm/300psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories,tools and plant and consumables etc for lowering of 200mm dia PVC pipes for housing fitted with socket and with or without well screen as per tenecessity for soft,medium,hard and boulder formation (PVC casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after completion of the tube well).(Icluding both LABOUR FOR DRILLING 200MM DIA UPTO 30 MTR. & LABOUR FOR DRILLING 150MM DIA FROM 30 MTR TO 150 MTR including all.) CONSIDER FOR 150 MTR DEPTH.Ground Floor
23310000564Lowering 200mm dia. PVC pipes with or without slotted pipes as per the necessity from ground level with fitting and fixing the same in a perfectly vertical position. This includes cutting, threading pipes/slotted pipes with providing and fixing of required jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells so as to prevent entry of foreign materials from above. (FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG).Ground Floor
23410000570Cleaning and developing 200mm dia. tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour .(FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG).Ground Floor
23510000586Supplying of control panel board with all accessories and fixing charges.(UPTO 3HP 3 PHASE)Ground Floor
23610000588Supplying and fixing of HDPE Pipes 32/40 mm (High Density Polyethylene pipes having inner dia. 32mm and outer dia. 40mm) 6Kg/Sq. cm With IS specification.(32MM NOMINAL BORE SIZE). Make Finolex/Oriplast/Supreme.Ground Floor
23710000594Supplying and fixing of PVC coated steel rope including cost of material, labour etc. complete. Make-Mahdev/AerolexGround Floor
23810000596Supplying and fixing of Finolex/L&T/Cable 4 Sq. mm (3core copper wire flat cable with PVC insulation).Ground Floor
23910000600Supplying and fixing of accessories like Nipple, Bore cover, MS clamp, Nut Bolt, Stainless steel nipple, Short piece, GI bend, Socket etc. complete.Ground Floor
24010001184Supplying of 200mm inner dia. PVC casing pipe for deep bore well CD (deep well casing) type basing on IS-12818-2010, wall thick ness 13mm to 14.8mm with One end of the pipe is male-threaded whereas the other end is a female-threaded socket. Threads are either V-type or trapezoid-type, and protection caps are provided on the threads to protect the threads in transit. With pressure ratings ranging from 7.5 to 20 bar (PN). Make: ORIPLAST/SUPREME/FINOLEXGround Floor
24110001192Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.1.5HP,Single phase,32D,21 Stage (head 33-167m) make: KSB(2C/25).Ground Floor
24210001198Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.2HP,Single phase,32D,27 Stage (head 57-208m) make: KSB(1C/35).Ground Floor
24340000564SUPPLY AND FIXING OF SUPER QUALITY DISPLAY CALLING BELL INCLUDING ALL ACCESSORIES AND CONNECTIONS AS PER INSTRUCTION OF ELECTRICAL ENGINEER-IN-CHARGE.Ground Floor
24440000946Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
24540000949Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
24640000952Recessed wiring to Calling Bell Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular bell push ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-bell push switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
24740000958Recessed wiring to Television Point (Modular)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/TV socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK).Ground Floor
24840000961Recessed wiring to Telephone Point (socket)with 2 pair 0.5sqmm telephone cable with 20 mm dia non metalic PVC flexible conduit with socket ISI marked MS Box including all accessories and connection.( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-s witch-Telephone socket -Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK).Ground Floor
24940000967Recessed wiring to Ceiling Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25040000970Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25140000973Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25240000976Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25340000982Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25440000985Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25540000988Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25640000991Point wiring for Computer Point ( MODULAR) with 2.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with3 Nos of 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25740001000Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25840001003Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK)Ground Floor
25940001012Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK)Ground Floor
26040001015Recessed wiring to submain in 4 x 10 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.11)(Make of PVC pipe-AKG/NORPACK)Ground Floor
26140001024Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI)Ground Floor
26240001033Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI)Ground Floor
26340001048Supply and laying of 120 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI)Ground Floor
26440001126providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18)Ground Floor
26540001129Supplying and fixing of 6\\"X4\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam)Ground Floor
26640001132Supplying and fixing of 8\\"X6\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam)Ground Floor
26740001135Supplying and fixing of 8\\"X10\\" 16/18 swg,2 \\" deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam)Ground Floor
26840001141Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
26940001145Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
27040001148Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
27140001151Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
27240001154Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
27340001160Supply and fixing of 63AMP DPMCB-1NO ,63 AMP .240V CUTOUT-2NOS METER SPACE WITH LOCKING ARRANGEMENT,METER CUT OUT,COPPER BUS BAR & INDICATOR including all accessories and connections. [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK]Ground Floor
27440001172Supply of U-type fan hook(Make-TATA)Ground Floor
27540001187Supply and fixing of 8 way , Double Door MCB Box with 1 No 32 Amp. DP MCB & 6 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )Make-MCB-(Legrand/L&T/ABB/SCHNIDER)Ground Floor
27640001190Supplying and fixing of Call Bell/buzzer ISI marked suitable for DC/AC single phase 230 volts complete as required (CSR sl no-1.30)Ground Floor
27740001193Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells)Ground Floor
27840001234supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells)Ground Floor
27940001237Supply and fixing of 4 way , single Door MCB Box with 1 No 32 Amp. DP MCB & 2 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.,2.7, )Make-MCB-(Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC)Ground Floor
28040001708Wiring to Loudspeaker with 2x1.5 sqmm stranded copper conductor unarmoured cable for loud speakers clamped with PVC pipe saddles,base etc.on ceiling/wall complete including termination,testing etc as required (Make-Finolex/Anchor/Havells/V-guard)Ground Floor
28140001709Installation,testing,commissioning charges of audio system.Ground Floor
28240001876Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic)Ground Floor
28340001879Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK)Ground Floor
28440002035Point wiring for Instrument Point ( MODULAR) with 4.0 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 2 Nos of 5 Amp, and 1 no of 15 amp modular type 250 V modular switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required as per direction of Engineer in charge . ( Make of wire Finolex / L &T / Anchor / Havels/ V guard)Ground Floor
28540002095Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL/VTR All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.Ground Floor
28640002179Recessed wiring to Surface Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection .( Make of wire Finolex / L &T / Anchor / Havells/ V guard)Make-switch /-Legrand /Wipro /Anchor /havells /Panasonic)Ground Floor
28740002201Supply & fixing of 200x150mmx60mm(nominal) size pvc(SINTEX) looping end box with hinged cover having one no.20 amp rating moulded fuse base &holder, 4amp NS type fuse and 4way connector to be used in the bottom of street light pole for cable termination as per electrical engg -in -charge and consoltant and complite as per electrical engg -in -charge and consultationGround Floor
28840002791Supply and fixing of Cable Tray 12 inch including all accessories and connections as per instruction of Electrical Engineer-in- ChargeGround Floor
28940002834Out DoorMS Stand for Cassette A.C.Ground Floor
29040002978Recessed wiring to foot light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge . ( Make of wire Finolex / L &T / Anchor / Havels/ V guard))Ground Floor
29140003123Drain pipeGround Floor
29240003148Supply,Installation,testing & Commissioning of 75\\" Interactive flat display panel (Make-Samsung-Model-WM75A,LG-Model-75TR3DJ)Ground Floor
29340003209Supply and laying of 300 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI)Ground Floor
29440006336Supply & fixing of 6 Way VTPNDB IP 43-Metal Door Incoming: 1 No of 100 A Four Pole MCCB with stud connector Outgoing: 6nos 40 A TPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )[Make-(a)MCB /MCCB -Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC )Ground Floor
29540006372Supply and fixing of 3Watt IP65 Square waterproof Recessed Aluminium embedded Staircase Corner outdoor LED Step light including alll accessories and connection.(Make-Crompton/Philips/Wipro)Ground Floor
29640007180Supply of 75 \\" LED TV with HDMI Port & wall mount bracket[Make-LG/Samsung/ Sony)Ground Floor
29740008124Supply & fixing of 400mm (16\\") wall mounted fan with complete accessories[brown/white].including hanging and connections [MAKE- USHA MODEL-MIST AIR DUOS/ CROMPTON MODEL-TROPEDO HI SPEED//HAVELLS/V-GURAD MODEL-PETAL WF 17/ANCHOR)Ground Floor
29840008126Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR)Ground Floor
29940008142Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER)Ground Floor
30040008150Supply and fixing of 6 way mcb Box ( 8+18)(PDB) with I/C- 63 AMP 4PMCB + 63 AMP 4P RCCB (300MA) & O/G- 20 AMP SP MCB -09 NOS&16 AMP SP MCB -09NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.[Make-(a) MCB/MCCB-Legrand/L&T/ABB/SCHNIDERGround Floor
30140008158Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO)Ground Floor
30240008385Supply and fixing of on 15 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-LSCRM-15W-CDL/LSCSM-15W-CDL)/ PHILIPS(MODEL NO-15W DURASLIM ROUND/SQUARE 165MM/WIPRO(MODEL NO-LD80-131-XXX-60-XX)Ground Floor
30340008387Supply and fixing of on 24 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON/ PHILIPS(MODEL NO-22W DURASLIM ROUND/SQUARE 208 MM/WIPRO(MODEL NO-LD80-281-XXX-60-G1)Ground Floor
30440008389Supply and fixing of on 34/36watt square (2'x2')shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-TCR-145-36-65-SL-NWH (36 WATT)/PHILIPS(MODEL NO-RC360B LED36S 36W 3600)/WIPRO(MODEL NO-CRCO10R038HP57G3)Ground Floor
30540008393Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001)Ground Floor
30640008397Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4'/ WIPRO(MODEL NO-LL20-221-XXX-65NE3)Ground Floor
30740008405Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX )Ground Floor
30840008481Supply of wall mounted speaker make- Ahuja (ASX-312bt) including all accessories.Ground Floor
30940008485Supply of Central amplifier Make-Ahuja(CMA-5400) including all accessoriesGround Floor
31040008487Supply of Audio amplifier Make-Ahuja(SSA-250DP) including all accessoriesGround Floor
31140008495Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL)Ground Floor
31240008505Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX)Ground Floor
31340008507Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszg ,1mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-1-LS)/DIGISOL/MOLEX)Ground Floor
31440008509Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszh ,2mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-3-LS)/DIGISOL/MOLEX)Ground Floor
31540008511Supply & fixing of information outlet with faceplate,single port ,modular straight shu and keystone,cat-6 utp,white,toolless type(MAKE-D-LINK/MOLEX/DIGISOL)Ground Floor
31640008513Supplying & fixing of patch panel ,24 PORT,CAT-6 UTP 180 Degree including all accessories and connections(Make-D-Link(Model N o-NPP-C61BLK241)/MOLEX/DIGISOL)Ground Floor
31740008585Supply and fixing of surface mounted led 18 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCDSPLN-R-18-CDL/LCDSPLN-S-R-18-CDL)/WIPRO(MODEL N O-LD80-171-XXX-60-SM/PHILIPS(MODEL NO-20W Rd Metal FullGlow LED Surface )Ground Floor
31840008586Supply and fixing of 24 Port Gigabit Smart Managed Switch with 4 Gigabit SFP Ports including all accessories and connection(Make-D-LINK(MODEL NO-DGS-1210-28)/DIGISOL (MODEL NO-DG-GS1528)/MOLEX)Ground Floor
31940008678Supplying and fixing of Hybrid EPABX system equipped with 128 Analog extensions and 6 Analog Trunk, including required hardware and software etc (Make-Crystal/Accord/Matrix)Ground Floor
32040008680Supplying desktop telephone sets with colour ID (Make-Crystal/Accord/Matrix)Ground Floor
32140008682Supplying and drawing 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the surface/ recessed steel/ PVC conduit as required.( Make of wire Finolex /Anchor / Havells/V guard)(Make of PVC pipe-AKG/NORPACK)Ground Floor
32240008684Supplying and drawing 20 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the surface/ recessed steel/ PVC conduit.( Make of wire Finolex /Anchor / Havells/V guard)(Make of PVC pipe-AKG/NORPACK)Ground Floor
32340008687Supply and fixing of 50 pair DP box for above including all accessories and connectionGround Floor
32440008691Supply installation testing and commssioning Basic SIP Backlit IP Phone as reqd. (Make-Crystal/Accord/Matrix)Ground Floor
32540008693Supply installation testing and commssioning Executive SIP Backlit IP Phone . (Make-Crystal/Accord/Matrix)Ground Floor
32640008695Supply installation testing and commssioning SIP Baed IP video Phone . (Make-Crystal/Accord/Matrix)Ground Floor
32740008914Supply and installation of Copper pipe for cassette AC including all accessories and connection.Ground Floor
32840009119Providing and fixing of 30 wt. LED COB Light fitting with lamp , choke, connecting wire, and all accessories and connections as per instruction of Electrical Engineer-in-charge.(Make- CROMPTON(model no-CDR-210-30-30/40-SL-NWH)/WIPRO(MODEL NO-LD56-381-060-40-XX ( 32 WATT ) /PHILIPS(MODEL NO-30W ACCENT SPOT)Ground Floor
32940009335Supply of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size. Including cost, conveyances, loading unloading , labour, T&P, sundries, scaffolding required for the work etc, complete as per specification ( Make of wire Finolex / Anchor / Havells/V guard)Ground Floor
33040009625Supply , installation, testing & commissiong of 2 Tr. Cassette AC, R410A including out door/ mounting stand with all accessories &connection. Make- Carrier/Blue starGround Floor
33140009682Supply , installation, testing & commissiong of 3 Tr. Cassette AC, 3 star R410A including out door/ mounting stand with all accessories &connection. Make- Carrier(MODEL-R32)/Blue star(MODEL-ID336MBTUR3)Ground Floor
33240009753Supply , installation, testing & commissiong of 4 Tr. Cassette AC, 2 star R410A including out door/ mounting stand with all accessories &connection. Make- Carrier/Blue starGround Floor
33340011210Supply & installation of LED Display Board P2.0 mm Indoor fine Pixel Active LED Video wall , pixel density 120000 dots/sqm, pixel comnfguration 1R 1G 1B , Screen Dimension- (L) 3749 MM (H)1920 MM , Screen Resolution - (L) 2048 PIXELS x (H) 512 PIXELS, module resolution128x64 dots, frame frequency 60Hz single LED unit pixel ,brightness 600-800cd/sqm,gray scale up to 16bit,input voltage 220V ACwith supply and installation.Thickness of the screen> 120mm wall(BIS certified module)LED: NATION STAR SMD.Ground Floor
33440011214Fixing of frame structure for supporting Indoor LED board made by 40x40x3 mm square pipe.Ground Floor
33540011246Supply , installation, testing & commissiong of 1.5 Tr. Cassette AC, R410A including out door/ mounting stand with all accessories &connection. Make- Carrier/Blue starGround Floor
33640011638Supply and installation of E-Podium (For classroom) metalic body with top sliding mechanism ● Visualiser Tray ● Rack for Equipments ● 21.5 inches Touch Screen Monitor ● Laptop Interface with inbuilt switcher ● Gooseneck Mic, Wireless lapel Mic and handheld mic, ● 100 Watts Amplifier, ● Speaker Pair ● Central Control System with Button Pad Projector, Screen, Audio and Video Control ●Cabling (Make-Pepole link/Globous)Ground Floor
33740011640Supply and installation of E-Podium (For auditorium)) metalic body with top sliding mechanism ● Visualiser Tray ● Rack for Equipments ● 21.5 inches Touch Screen Monitor ● Laptop Interface with inbuilt switcher ● Gooseneck Mic, Wireless lapel Mic and handheld mic, ● 200 Watts Amplifier, ● Speaker 4 nos ● Central Control System with Button Pad Projector, Screen, Audio and Video Control ●Cabling (Make-Pepole link/Globous)Ground Floor
33840011861Supply of Novastar VX 1000 All in one Controller with 1 xHDMI 1.4(IN &LOOP),1 x HDMI 1.4,1 xDVI, 1 x 3G-SDI(IN &LOOP) ,1 X 10 G Optical Fibre Port , 10x Gigabyte Ethernet ports, A single deviceunit drives upto 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels, 2xFibre out put , 10 G Optical fibre ports, Self -adaptative, max capacity -1x 4k x1k @60Hz or 2x2k x1k @60 hz , Ethernet: Connect to the control PC or Router (Make-Novastar )Ground Floor
33940011913Supply and insstallation of 98\\" automatic data processing interactive unit,4K UHD interactive panel with built-in android OS,8GB+128GB configuration and recognizes upto 20 unique points of touch display with HDMI-out ,3 years warranty.(Make-People link/Viewsonic/LG)Ground Floor
34040011921Supply & Installation of 1No 800 A 4P ACB (EDO) panel with indicator,fuse base with link,digital voltmeter,digital ammeter with 800/5 A CT and Indicator (ON, OFF) with all accessories as per specification.[Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b) -Voltmeter, Ammeter-AE/CAPPA (c) All other Accessories ISI mark]Ground Floor
34140012323Supply and fixing of surface mounted led 24 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCTLSNE-24-FO-CDL)/WIPRO(MODEL NO-LD81-271-XXX-60-SM/PHILIPSGround Floor
34240012339Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints ,comprising the following: [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming-1000A 4PMCCB(50KA)-1 No Cu Busbar,Instrument-Multifunctional Meter,Indicator etc-1 set SPD-100 KA, Type-1+2 with MCB Out going-I (POWER) 4 Nos of 400Amp 4 pole MCCB(35ka) 6 Nos of 100A 4P MCCB(35KA) 2 Nos 160A 4PMCCB(35KA) Outgoing-II (light/COmputer/Lift) 400A 4P Changeover-1 No 400A 4PMCCB-1 No(35KA),500A Busbar,Indicator Outgoing-III 100A 4PMCCB-6 Nos(35KA) 63A 4PMCCB-4 Nos Acessories-Panel Duly fabricated & wired with BusbarGround Floor
34340013017Main Distribution Board-Incoming power Distribution Panel/board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes,gasket,powder coated,top & bottom terminals and properly painted with anticorrosive primer and paints,comprising the following [Make-(a)MCB/MCB Box-LEGRAND/ L &T/HAVELLS/ SCHNIDER /C & S/HPL/ANCHOR-PANASONIC (b) meter ,Ammeter-AE/CAPPA(c)all other acessories ISI mark] Incoming- 1 No 250 Amp FP MCCb[36KA],Busbar:4 Nos 250A,500V Electrolytic copper strips,RYB-1 No O/G- 16A 4PMCB-12Nos 20A DPMCB with stut connector-8 Instrument-03 Nos Multi-function meters showing voltage ,current,pf,frequency,MD and THD with required 500/5A CTS 03 Nos:LED type phase indicating lndicating lamps with control fuses <(><<)>(><(><<)><(><<)>)>(><(><<)>(>&<(><<)>)><(><<)>(><(><<)><(> <<)>)>)> toggle switches.Ground Floor
34410000210Fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification( Fixing of CP wall mixture conforming to CON-219KN) ( JAQUAR MAKE).Ground Floor
34510000294Laying in trenches OD PVC pipes and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. 110mm dia OD P.V.C SWR double socket pipes (ISI TYPE-A),Analysis is done as per AR-2013,SL NO-2.3.2 .Ground Floor
34610000388Providing and fixing on wall face PVC SWR moulded fittings / accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion . AR.-2013,SL.-NO-3.3.3.VI .110MM DIA P.V.C Double Junction With door.Ground Floor
34710001056Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes.Ground Floor
34810001058Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes.Ground Floor
34910001060Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes.Ground Floor
35010001062Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 50 mm outer dia CPVC pipes.Ground Floor
35110001064Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm).Ground Floor
35210001066Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm).Ground Floor
35310001070Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type.Ground Floor
35410001072Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type.Ground Floor
35510001076Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type.Ground Floor
35610001084Providing and fixing 110 mm dia. PVC SWR P-Trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. P - trap PVC SWR type.Ground Floor
35710001088Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall.Ground Floor
35810001094Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm.Ground Floor
35910001096Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete, with cement concrete (1:3:6) and 12mm cement plaster (1:3) along with Cement punning.Ground Floor
36010001098\\"Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX \\"110mm Dia Inlet & Outlet floor trap PVC SWR type.Ground Floor
36110001104Fixing EWC with S-trap(220mm) Floor Mounted With PP soft close seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set Size: 365X680X770mm conforming to IS 2556 : Part 8-2004, to the floor with Rawl plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. ( With Seat and cover)make: JAQUAR(CNS-WHT-755S220SPPZ)/ KOHLER(K-2983IN-S-O) Floor mounted with systernGround Floor
36210001118Providing and fixing stainless steel kitchen sink with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Size 600X450X225mm Steel Sink Matt single bowl. Make: (Parry ware(C857272)/Hindware(KS FLAMINGO)). Stainless steel kitchen sink - 600X450X225mm Single bowl.Ground Floor
36310001120Providing and fixing wash basins full pedestal with hole for pillar taps with 10mm dia. M.S. rack bolt painted white including cutting holes in walls and making good the damages etc. all complete, with fixing of 15mm dia. pillar cock,32mm dia. CP waste,15mm dia. PVC Reinforced heavy duty connection pipe, 32mm dia. PVC connection pipe, complete as per specification. Vitreous china flat back wash basin size 550x400x200 mm). Make: JAQUAR(CODE for Basin- CNS-WHT-801, for Full Pedestal -CNS-WHT-301, for Pillar cock-CON-021, for 32mm full/half thread CP wast e-ALD-705/709, for Rack bolt-ZPS-MST-RB03). Vitreous china flat back wash basin 550x400x200mm.Ground Floor
36410001122Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm.Ground Floor
36510001124Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
36610001126Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
36710001128Providing and fixing of 50mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 50 mm dia. CPVC Full Way Valve / Ball Valve.Ground Floor
36810001132Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock.Ground Floor
36910001136Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock.Ground Floor
37010001140Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose.Ground Floor
37110001142Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm.Ground Floor
37210001146Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet.Ground Floor
37310001148Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder.Ground Floor
37410001150Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self.Ground Floor
37510001152Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail.Ground Floor
37610001154Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange.Ground Floor
37710001158Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality).Ground Floor
37810001160Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks.Ground Floor
37910001209Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish.Ground Floor
38010001294Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 32 mm diaGround Floor
381MIS-CVL-DRAIN
38250000001Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth.Ground Floor
38350000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
38450000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
385500000216mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces.Ground Floor
38650010360Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB)Ground Floor
38750010396Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING)Ground Floor
38850010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
389MIS-CVL-FURNITUREW
39050005278Providing and fixing Wall panelling (Laminate Finish) suitably fixed to the walls and column wood frame with 19 mm ply surface will be 6mm ply finished with a combination of 1mm thick laminate complete (Basic Rate of laminate ± Rs. 55/sft ) as per detail . (Excluding GST ) all complete as per direction of Engineer-in-Charge .[N.S.W.I]Ground Floor
39150005373Providing and fixing of Side table made of 19mm thick ply board of bwrquality with ISI cerification.The tables Aprone, side panel and top will be 1mm thick premimum texture laminet finish of Century Make ,seating side will be provision for drawer & cabinet. The Edges of table top will have moulding 1st quallity teak wood (CP type) as approved by Engineer in charge . Table will have post adjacent to approve with colnial type grove with diamond patch of 1st quallity teak wood ( CP) type including of melamine finish semi mat wallnut / sapli type stain with rich look. The drawer inside will have 1mm laminate finish . The inner surface of the table will be sprayed with Duco paint over synthetic puty. Table will have provision of footrest which will detachable type made of teak wood size of 36' x 12\\"x 12\\". ISI marked hardware items required to be use in tabe as approved by engineer in charge. Each table joinary will be finger joints as approved CMC technology.Side Table 3'0'' x 2'6\\" x 1'4\\"[N.S.W.I]Ground Floor
39250010074Providing & Fixing of Workstation Chair. Model:Geeken- GA 502 C. [NEW NSWI]Ground Floor
39350010098Providing & fixing SIDE TABLE (900X400X 750mm) as per working drawing. The table made of using 19mm BWP grade ply Board (Make Century Sainik 710, green marine gold 710), top surface of table should pressure bottom and whereas all exposed area of ply board should top will be Corian hard surface and 1mm veneer finish laminate. The top surface sides & front of cupboard shall be veneer with 1mm thick veneer finish laminate of approved shade & make with key board tray provision with telescopic sliding channel. The sides and front of the table fully covered with 19mm BWP grade ply Board (Make Century Sainik 710, green marine gold 710) & 1mm veneer finish laminate. Cost includes all materials, labour, transportation, wastage, T&P, etc. all complete as per the direction of the Architect/EIC. (Laminate Make - Greenlam, Marino/ Centurylam ) [NEW NSWI]Ground Floor
39450010110Providing & fixing Executive Table (1800X900X 750mm) as per working drawing. The table made of using 19mm BWP grade ply Board (Make Century Sainik 710, green marine gold 710), top surface of table should pressure bottom and whereas all exposed area of ply board should top will be Corian hard surface and 1mm veneer finish laminate. The top surface sides & front of cupboard shall be veneer with 1mm thick veneer finish laminate of approved shade & make with key board tray provision with telescopic sliding channel. The sides and front of the table fully covered with 19mm BWP grade ply Board (Make Century Sainik 710, green marine gold 710) & 1mm veneer finish laminate. Cost includes all materials, labour, transportation, wastage, T&P, etc. all complete as per the direction of the Architect/EIC. (Laminate Make - Greenlam, Marino/ Centurylam ) [NEW NSWI]Ground Floor
39550010152Providing & placing Side Table of size 470 mm x 470 mm made of Stainless Steel Leg , Top with high quality HDF finished with approved Laminate , all Edge finished with matching 1mm thick Edge binding tape , to be used beside Sofa to hold snacks, colddrinks, etc. including all materials, cost of all labour, sundries, T&P etc. required for the work and complete in all respect as directed by Architect / Engineer-in-charge. [NEW-NSWI] Make: BWP Ply(Century Sainik 710/ green marine gold 710), Laminate(Greenlam/ Centurylam).Ground Floor
39650010566Providing, fabricating and installing L shaped executive table,overall sizeof (1800mmx1800mmx750mm)asper theapproveddesign made up 19mm thick BWP ply with 1mm thick laminate finish of approved shade on all exposed surface. Allinternal surfaces shall be finished with balancing laminate of0.8mm thick, matching with the approved shade of laminate intable without any visible joint, groove, with 3nos drawers,1 no cup board,Key board tray provision using 12\\" triple slidetelescopic channel. There should be adequate space for CPU,UPS complete in all respect including necessary fittings,fixtures,transportation, labour, materials, etc. Themeasurement should be taken from the top area. Make:- BWP Ply (Century Sainik 710 / Greenmarine gold 710), Laminate (Greenlam/ Centurylam),Hard warefittings (Godrej).[NSWI]Ground Floor
39750010903Providing, fitting fixing of wall panelling made out of Al Section no 9835 as horizontal and vertical member placed at a spacing of 2'-0\\"x2'-0\\" c/c with 12mm BWP ply covering with 1mm thick laminate etc complete with all material & all labour T&P etc as per specification approved by the Department Make: BWP Ply(Century Sainik 710, green marine gold 710),( Laminate (Century lam/Green lam)Ground Floor
39850010987Providing and fixing Work station of size in plan and height of 0.75mt as per site condition having working desk of 0.75mt height from floor level. The table top should have 19mm BWP grade ply confirming to IS standard of approved make and quality. The top surface and side should be laminated with 1mm thick laminate of glossy/matte finish premium quality of approved shade. Along with cupboard with 1 draw + 1door + CPU stand, etc. All internal surface should be finished with 0.8mm thick internal laminate of white or ivory, the cabinet hinge should be 3D soft close 4H half overlay 9 degree auto hinge(Godrej-2507),telescopic channel will be 12 inch long triple sliding(45kg)(godrej-8174), SS pull handle 100mm x 12mm(Godrej-7782), MP drawer lock(Godrej-8000) and the cost includes all materials, labour, T and P, hardware etc. complete in all respect.(NSWI) Make: BWP Ply(Century Sainik 710/ green marine gold 710), Laminate(Greenlam/ Centurylam/Marino).Ground Floor
39950013340Supplying and instllation of dining chair having Seat and Back made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Make: GODREJ ,Model-UNWIND, HSN CODE-94016900Ground Floor
40050013360Supplying and installation of executive high back chair have SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE : 47.5 cm. (W) x 77 cm. (D), ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter giving option of variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated.4 SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm.5 ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.6 PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.7 PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) 8. TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene. Make: GODREJ executive highback chair ,Model-LASED, HSN CODE-94013900Ground Floor
40150013390Supplying and installation of 2 seater sofa of seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understruCture for support and additional cushioning purpose .t should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. Make: GODREJ 2Seater sofa ,Model-PISA , HSN CODE-94017100Ground Floor
40250013450Supplying and installation of double bed Overall Size :Length - 2060.0 mm Width - 1733.0 mm Height - 945.0 mm and Material:Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom pliilth are made of 25 mm Thick Prelaminated Particle Board. Plinth support assembly is made of M.S. 25 mm square pipe in 1.2 mm thickness. Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Construction:Knock Down construction. Packets:1 Bed in 2 packets. Finish:18 mm thick Prelaminated Particle Board is in Walnut shade. Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10). Make: GODREJ double bed ,Model-ADRIANA , HSN CODE-94035090.Ground Floor
40350013460Supplying and installation of study chair with desklet having Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. The Armrest should be made of indoor grade PolyPropylene compound and assembled over the tubular frame. The \\"L\\" shaped desklet should be made of 1.8+-0.05cm thick prelaminated particle board with 0.2+-0.05cm thick injection moulded poly proplylene all around. Desklet should have back and front adjustment of 4.4+-0.5cm. The paper tray should be made of 0.4mm thick MS rod which is spot welded to form a mesh like structure. Make: GODREJ study chair with desklet and under paper tray ,Model-UNWIND , HSN CODE-94016900.Ground Floor
40450015381Geeken Make Dual desk-cum-bench (double seater) size 1050mm X 980mm X 750mm for Supplying and Installation. The top of the desk shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on CRCA rectangle pipe having cross-section area 40mm X 20mm with 1.2mm thick. The shelf shall be made up of 18mm thick Pre-laminated particle board with 2mm thick PVC edge banding. It should be supported on CRCA rectangle pipe having cross-section area 40mm X 20mm with 1.2mm thick. The side panel of the table shall be made of CRCA rectangle pipe having cross-section area 40mm X 20mm with 1.2mm thick placed in vertical position at both side of the desk and bench. Hooks should be provided on the vertical side frame on both side of the desk for hanging bags/bottles. The front of the desk shall be clad with modesty panel made up of 18mm thick Pre-laminated particle board hinged with front pipe frame. The seat and back shall be made up of 18mm thick Pre-laminated particle board and the edges shall be sealed with 2mm thick PVC edge banding. The seat and back shall be supported on CRCA square pipe having cross-section area 40mm X 20mm with 1.2mm thick and 19mm X 19mm with 1.2mm thick respectively. 2 nos. footstep shall be provided for structural support of the desk having cross-section area of the pipe 40mm X 20mm with 1.2mm thick. The complete steel structure shall be welded with base pipe having cross-section area 40mm X 20mm with 1.2mm thick and also be epoxy polyester powder coated to the thickness 50-60µ thick. There shall be shoe provided at the base to avoid scratches as well as uneven surfacing. The size of the writing top shall be 1050mm(W) X 400mm(D), seat size shall be 1050mm(W) X 300mm(D), back size shall be 1050mm(W) X 200mm(H). All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. CODE - STUDENT 1 (GEEKEN)Ground Floor
405MIS-CVL-INSPECTION
40650000001Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth.Ground Floor
40750000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
40850000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
4095000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
41050000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
4115000171912mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.Ground Floor
41250010396Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING)Ground Floor
41350010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
414MIS-CVL-SEPTICTANK
41550000001Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth.Ground Floor
41650000003Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height.Ground Floor
41750000017Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete.Ground Floor
41850000018\\"4\\"\\" thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. \\"Ground Floor
41950000019\\"25mm. thick A.S. Flooring with cement concrete 1:2:4 including punning using 12mm. size hard granite chips including cost of all materials T & P etc complete. \\"Ground Floor
420500000216mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces.Ground Floor
4215000002216mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height.Ground Floor
42250000488Fly Ash brick masonry in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 25cm x 12cm x 8cm having crushing strength not less than 75kg per sq. cm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc. complete. In Foundation and PlinthGround Floor
4235000171912mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete.Ground Floor
42450001806F.A brick masonary work in cement mortar (1:4) using F.A bricks of 25cm x 12cm x 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials and cost of labour etc complete.(IN FOUNDATION & PLINTH)Ground Floor
42550010360Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB)Ground Floor
42650010420Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES)Ground Floor
42750010444Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM)Ground Floor
42850010470Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel.Ground Floor
429MIS-INE-CCTVSURVEI
43040000982Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
43140003011Supply and laying of 3 Core 1 sq.mm. power Cable in ISI marked Medium PVC Pipe using Saddle and Screw with all accessories per running metre of cable used. (Make- FINOLEX/HAVELLS/POLYCAB)Ground Floor
43240003013Supply Wireless Mouse (Make- Logitech)Ground Floor
43340003021Supply OF 10 Meters Long HDMI Cable make Belkin / MXGround Floor
43440008495Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL)Ground Floor
43540008498SUPPLY OF 9U WALL MOUNTED RACK INCLUDING ALL ACCESSORIES AND CONNECTION(MAKE-D-LINK(MODEL NO-NWR-9U-5545-GR)/MOLEX/DIGISOL)Ground Floor
43640008505Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX)Ground Floor
43740010311Supply , Installation, testing , commissioning of 64Ch. 4K Network Video Recorder(Instastream/H.265/Smart H.264+/H.264/MJPEG codec decoding, Support 8 SATA HDDs up to 10TB Each,Support Multi-brand network cameras) Make - CP Plus/ PramaGround Floor
438400103134MP WDR 32x IR Network PTZ Camera: 1/2.8\\" 4MP CMOS Image sensor (0.9071 centimeters), Max. 50/60fps@4MP, Powerful 32x Optical zoom and 16x Digital zoom, WDR(120dB), 2D/3D-DNR, Day/Night (ICR), EIS, Electronic Defog, ROI, AGC,AWB, BLC, HLC, IR Range of 150 Mtr., Max 300° /s pan speed, 360° endless pan rotation, Support Face Detection, Make - CP Plus/ PramaGround Floor
43940010317Supply , Installation, testing , commissioning of 24-Port Gigabit Ethernet POE Smart Switch. Make: Netgear/Juniper/ArubaGround Floor
44040010331Supply , Installation of PVC IP55 Junction BoxGround Floor
44140010407Supply , Installation, Testing of 8 TB Surveillance HDD, Make- SEGATE/WDGround Floor
44240011085Supply , Installation, testing , commissioning of 5MP WDR IR Network Bullet Camera: (1/2.7\\" 5MP CMOS Image sensor ,Max. 5MP @20fps, IR Range of 30 Mtrs, Instastream, H.265 and Smart H.264+ Dual-stream encoding ,WDR(120db), Day/Night (ICR), 3D-DNR, IP67, Micro SD and PoE Support) Make - CP Plus/ PramaGround Floor
44340011087Supply , Installation, testing , commissioning of 5MP WDR IR Network Vandal Dome Camera: (1/2.7\\" 5MP CMOS Image sensor ,Max. 5MP @20fps, IR Range of 30 Mtrs, Instastream, H.265 and Smart H.264+ Dual-stream encoding,WDR(120db), Day/Night (ICR), 3D-DNR, IP67, Micro SD and PoE Support) Make - CP Plus/ PramaGround Floor
44440011112Supply , Installation of 24*7 Surveillance sign board (18*12, Sun Vinyl Board)Ground Floor
44540011128Supply , Installation, testing , commissioning of 1KVA Online UPS with Battery with 30 Mins Backup Make-Numeric/APC/MicrotekGround Floor
44640011242Supply , Installation, testing , commissioning of 5 KVA online UPS with 26 Ah x 16 Nos Battery with 30 min Backup UPS Make-Numeric /APC/Microtek. Battery Make-Exide/QuantaGround Floor
4474001144455\\" LED TV 24 x 7, HDMI Port with wall mount bracket(Make-LG / Samsung / Panasonic/Sony)Ground Floor
44840012284Supply , Installation of RJ45 Connector Make-D-link/Digisol/MolexGround Floor
449MIS-INE-DGSET
45040010602Design, supply, erection, testing and commissioning of 82.5KVA silent type DG set with AMF, 415 V three phase 1500 RPM ,50HZ ,6 Cylinder with 4 nos chemical earthing,50 mtrs-power cable and control cable-15 mtrs for AMF ,50ltrs diesel ,125 AMP 4 POLE CHANGE OVER ,ms pipe exhaust system, residual silencer, thermal logging and cladding of exhaust pipe complete , D.G. Plinth with foundation & Shed as per specification as required . Make- Mahindra Powerol(model no-V4355G3 Ltd/Jakson(Cumins) model no-CI82.5D5P,ENGINE MODEL-QSB4.5-G1.Ground Floor
451MIS-INE-ELEVATOR
45240000955Recessed wiring to Bulk Head Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
45340000985Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK)Ground Floor
45440001000Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK)Ground Floor
45540001015Recessed wiring to submain in 4 x 10 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.11)(Make of PVC pipe-AKG/NORPACK)Ground Floor
45640001126providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18)Ground Floor
45740001166Supply and fixing of 63 AMP 4P MCB-1NO,63 AMP,415 V CUTOUT-3 NOS WITH COPPER BUS BAR & INDICATOR ETC including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK]Ground Floor
45840001367Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI)Ground Floor
45940001595Supply and fixing of Bulk Head fitting with 9 wt. LED Bulb including all accessories and connections as per instruction of Electrical Engineer-in-charge. (Make- CROMPTON/ PHILIPS/ WIPRO/HAVELLS/PANASONIC)Ground Floor
46040002155Supply and fixing of 16 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.(Brass compression)Ground Floor
46140008251Supply, Erection, Testing &Commissioning of 13 Passenger, (Ground + 4) floor Machine Room or Machine room less Elevator with ACV3F drive/control for constant load of 884 Kg/as per NBC ,five stops , Automatic Rescue Device, Speed (01Meter per second), push button operation (Nudging), cross flow fan for ventilation, Auto fan cut off, heavy duty vinyl tile flooring, auto central door opening/closing ( All opening on same side), car position indicators, LED scrolling display, LED ceiling lights, auto voice synthesizer, overload alarming device, infrared door closing protection, door time protection, sensor based door movement, emergency alarming system, emergency light, braille push buttons, intercom, stainless steel mirror finished (lift car, lift door & hand rail), Fire rated door with 60 Mins. fire rating, Fireman's switch, Cladding at each stop(both side & top of each entrance with ply & lamination). The Elevator should be suitable for physically challenged persons.The scope of work is Supply, Erection, Testing & Commissioning of Elevator along with all related civil and electrification work. Make of the Elevator :- OTIS/MITSUBISHI/SCHINDLERGround Floor
46240008291Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing)Ground Floor
463MIS-INE-FIREFIGHTI
46440007930Supply, Installation, Testing and Commissioning 250mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti/ Wurth)Ground Floor
46540007932Supply, Installation, Testing and Commissioning 200mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti)Ground Floor
46640007934Supply, Installation, Testing and Commissioning 150mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti/ Wurth)Ground Floor
46740007936Supply, Installation, Testing and Commissioning 100mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti)Ground Floor
46840007938Supply, Installation, Testing and Commissioning 80mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti)Ground Floor
46940007940Providing and fixing of Non return valve 200mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR.Ground Floor
47040007942Providing and fixing of Non return valve 150mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR.Ground Floor
47140007944Providing and fixing of Non return valve 100mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR.Ground Floor
47240007950Providing and fixing of 150mm nominal dia C.I. Butterfly valves conforming to PN 1.6/13095 with nuts, bolts, washers, 3mm thick ins ertion rubber gasket and two matching flanges .SANT / ZOLOTO / KARTARGround Floor
47340007952Providing and fixing of 100mm nominal dia C.I. Butterfly valves conforming to PN 1.6/13095 with nuts, bolts, washers, 3mm thick ins ertion rubber gasket and two matching flanges .SANT / ZOLOTO / KARTARGround Floor
47440007954Providing and fixing of 80mm nominal dia C.I. Butterfly valves conforming to PN 1.6/13095 with nuts, bolts, washers, 3mm thick inse rtion rubber gasket and two matching flanges .SANT / ZOLOTO / KARTARGround Floor
47540007958Supply, installation, testing and commissioning 150mm dia CI `Y' strainer with bronze perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers etc., complete.SANT / ZOLOTO / KARTARGround Floor
47640007960Supply, installation, testing and commissioning 100mm dia CI `Y' strainer with bronze perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers etc., complete.SANT / ZOLOTO / KARTARGround Floor
47740007964Providing and fixing dial type pressure gauge with isolation cock and chrome plated copper pipe at hydrant station.Make - H-Guru.Dial diameter 100 mm calibration 0-15 kg/sp.cmGround Floor
47840007966Supplying and Installation, Testing & Commissioning double flanged vertical air vessel fabricated from 10mm M.S. plate with dished ends from 12mm M.S. plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality and sufficient provision of pressure switches, Pr. Relief Valve, tripod type stand, pressure gauge with ball valve, drain ball valve of 50mm dia with piping complete as required and all other required accessories to operate commonly main fire pump, diesel fire pump and Jockey pump at drop of pressure, automatically at required pressure setting. Recommended dia. : 250 mm,Height of shell : 1000 mm,Working pressure : 19 Kg/cm2,Test Pressure : 28.5 Kg/cm2Ground Floor
47940007968Providing and fixing electrically operated dual type pressure switches with threaded connection for a pressure vessel, complete suitable for 0-15 Kg/Sq.cm model IPS-200 .Make - Dandfos.Ground Floor
48040007972Providing and fixing of 25mm brass ball valve with lever and screwed female ends.(20 kg/cm2)at all level and position .Zoloto/Kartar.Ground Floor
48140007974Supplying and fixing approved make 25 mm dia automatic air release valve suitable for 20kg/sqcm working pressure with necessary fittings complete in all respect at all level and position .Zoloto/Kartar.Ground Floor
48240007984Supplying,Fixing ,testing and commissioning of compartmentalized common control panel for one diesel,one electic & one jockey pump with mechanical and electrical interlock facility for the fire pumps. All the components shall be housed in a common cubical made of 16 SWG. M.S. sheet with required stiffeners). The panel shall be powder coated of approved color both inside & outside. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height.Make -ASES/LUBI/GREEN POWER .Ground Floor
48340008008Providing and fixing SS landing valve conforming to IS -52290 with 63 mm dia. instantaneous female coupling on the outlet with PVC cap with chain, necessary companion flanges ( as per table \\"E\\") nuts, bolts, washer and gasket complete as per specification. (ISI marked) .SAFE GUARD / KARTAR /Ground Floor
48440008010Providing and fixing first aid fire hose reel drum wall mounting, swinging type fitted with 20mm dia. B129 30m long high pressure rubber hose type -II to IS. 5132 or nylone braieded polypropelene hose of approve make with 5 mm outlet S.S. nozzle with shut off valve (IS. 884-1969).(Make-SAFE GUARD / KARTAR / SWASTIK)Ground Floor
48540008012Providing and fixing SS coupling 63 mm dia. 15m long rubberized EPDM lined hose including SS male and female instantaneous type coupling approved by fire authority.(Make-SAFE GUARD / KARTAR / SWASTIK)Ground Floor
48640008014Providing and fixing standard short size SS branch pipe with SS nozzle 16 mm dia. outlet with standard instantaneous type 63 mm dia. coupling. (ISI marked) .(Make-SAFE GUARD / KARTAR / SWASTIK)Ground Floor
48740008018Providing and fixing M.S. structural work fabricated from standard sections e.g. M.S. Rounds, angles, channels, GI clamps including cutting to size drilling, welding including insert plates or \\"Hilti/ Wurth fastners of required specification in RCC structural/masonry.Ground Floor
48840008020Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with locking arrangement and hanging arrangement for accessories painted \\"Fire Red\\" with enameled paint \\"Fire Hose\\" written on front including suitable supports to place 900 mm above ground level properly anchored, approximately size 750x600x250 mm deep (to house two lengths of canvas hose with couplings, branch pipe with nozzle for external hydrants)(Make-Kartar/Newage)Ground Floor
48940008024Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex )Ground Floor
49040008026Providing and fixing stored pressure portable (powder type) ABC - 6.0 kg fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug(Make -Fire shield/Kanex/Safex .)Ground Floor
49140008033Providing and fixing of 4kg clean agent type fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug (Make -Fire shield/Kanex/Safex .)Ground Floor
49240008041Supply ,Installation,testing & Commissioning of 2LOOP FIRE ALARM PANEL 32bit microprocessor based intelligent addressable Fire Alarm control Panel LPCB Approved with battery backup.The panel would be modular,decentralized,with minimum 240 character LCD display & for networking.Each loop would be capable to have atleast 99 addressable detectors & devices with 30mins battery backup & battery charger Inbuilt. Make-Honeywell MORLEY IAS/ Apollo /system sensor Or GST .Ground Floor
49340008047Supply, Installation,testing & Commissioning of intelligent addressable multicriteria detector with base . Make-Honeywell MORLEY IAS/ Apollo /system sensor Or GST .Ground Floor
49440008049Supply ,Installation,testing & Commissioning of Manual Call Point. Make-Honeywell MORLEY IAS/ Apollo /system sensor Or GST .Ground Floor
49540008051Supply ,Installation,testing & Commissioning of flash cum sounder(Hooter).Make-Honeywell MORLEY IAS/ Apollo /system sensor Or GST .Ground Floor
49640008073Supply and fixing of wall mounting type Auto glow signages of different type like, fire exit with one side arrow /do not use lift in case of fire/Emergency Exit/Staircase Indicating Arrow etc . Sizes :-300x150mm . type .(Make-Prolite autoglow)Ground Floor
49740008077Supply and fixing of ceiling hanging type Auto glow signages of different type like, fire exit with one side arrow /do not use lift in case of fire/Emergency Exit/Staircase Indicating Arrow etc . Sizes :-300x150mm .Ground Floor
49840008083Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/ wall speakers complete as required. Honeywell Or Ahuja/Bosch .Ground Floor
49940008091Supply, installation, testing and commissioning of speaker cable Single pair, 2-core, 1.5 sqmm with required conduit,bend,t etc.Make - Finolex Or Polycab.Ground Floor
50040008095Supply, Installation, Testing and Commissioning 50mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti)Ground Floor
50140008099Supply, Installation, Testing and Commissioning 25mm nominal dia flange jointed / screwed / welded, M.S. Pipes of Class c (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. (Pipes - Tata/Jindal ,Anchor fastener- Hilti/ Wurth)Ground Floor
50240008109Providing ,fixing , testing and commissioning of standard/quick response pendent type Sprinkler quartzoid bulb type with 15mm screwed end connection of 57 deg. C. temperature rating and sprinklers shall be UL Listed.Make - HD, Kartar or Tyco .Ground Floor
50340008487Supply of Audio amplifier Make-Ahuja(SSA-250DP) including all accessoriesGround Floor
50440010208Providing ,fixing , testing and commissioning of flow switch 150mm dia. Make - Honeywell.Ground Floor
50540010693Supplying, Installing, testing and commissioning Drainage Valve of size 50 MM dia with all accessories. (Kartar/Sant)Ground Floor
50640010694Supplying, installing, testing and commissioning of 1200 mm Sprinkler Flexible drop with mounting bracket with 15mm screwed end connection . (Sant/HD)Ground Floor
50740010700Supplying, installing, testing and commissioning of P.A. Console 8 zone shall expandable up to 60 zones , with priority module micro processor based, mixing amplifier, with 6 zone for suitable selection module, power supply unit & goose neck micro phone etc. (Make-Honeywell/Ahuja)Ground Floor
50840011765SITC of Rubber Expanssion Joint 150mm nominal dia as per BS 5155 ( PN 16) slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.ISI (Kartar/Sant)Ground Floor
50940011767SITC of Rubber Expanssion Joint 80mm nominal dia as per BS 5155 ( PN 16) slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.ISI (Kartar/Sant)Ground Floor
51040012343Providing and fixing of Non return valve 250mm nominal dia cast iron dual plate check valves of PN1.6 including nuts, bolts, 1.5mm thick compressed asbestos gasket including matching flanges .SANT / ZOLOTO / KARTAR.Ground Floor
51140012345Supplying, Installing, testing and commissioning Gate Valve of size 100MM dia with all accessories. (Kartar/Sant)Ground Floor
51240012347Supplying, Installing, testing and commissioing of wet alarm valve 150mm with all accessories. (Kartar/Sant)Ground Floor
513MIS-INE-LIGHTNINGP
51440002089Lightning Strike Counter Supply, Installation, Testing & Commissioning of non-electronic & non-resettable (Not require any external power supply) type lightning strike counter to count the lightning stroke having display with IP-67 enclosure including all accessories and connection..(6/7 digit) Make :- ABB / STROMKING/VTR All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Engineer-in-Charge.Ground Floor
51540002095Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL/VTR All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.Ground Floor
51640002098Supply, connection &Testing of sub earthing with 16 Sq.mm single core multi stranded copper flexible wire from surge protection device (SPD) panel to earth electrode & Main panel board to SPD panel including all accessories, cable socketing and connections. Make :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-ChargeGround Floor
51740002101Supply, Installation, Testing & Commissioning of indoor type wall mounted Surge protection device (SPD) panel made of 2 mm thick CRCA sheet, dust and vermin proof duly powder coated having the following arrangement & complete factory wired by 16 Sq.mm single core multi stranded copper flexible wire. [A] Type 1+2 AC Surge Protection Device (SPD) (TP+N) (50 KA) - 01 Set [B] 63 Amp. HRC fuse with link – 03 Nos [C] 100 Amp. 4 pole stud connector – 01 No Make of SPD & HRC Fuse :- HAVELLS / L&T / LEGRAND/VTR Make of Wire :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.Ground Floor
51840002720Supply and laying of 70sqmm single core FR PVC insulated unseathed copper conductor for voltage grade 1100 volt as per IS-694 in sur face/underground as required(sl no-5.5.2)(Make-KEI/FINOLEX/HAVELLS)Ground Floor
51940002739Air-Terminal Supply, Installation, Testing & Commissioning of Early Streamer Emission (ESE-60)type Lightning Air Terminal. Supporting Mast The mounting pole used to support the lightning air terminal shall be minimum length of 05 Mtr. , non corrosive and made up of medium class GI / SS pipe of 1.5″ diameter having base plate at bottom for securely fixing the mast on roof top. The mounting pole and supports shall be securely fixed with the brackets and PVC insulated metallic guy wires to withstand the maximum wind velocity of that area. Protection Radius :- 79-107Mtr Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge.Ground Floor
520a) APPROVED MAKE /BRAND FOR CEMENT : ULTRATECH, NUVOCO, ACC, JSW (PSC),RAMCO(PSC),DALMIA(PSC),SAGAR(PSC),JK SUPER(PSC),JINDAL PANTHER(PSC)
521APPROVED MAKE / BRANDS ARE TO BE UTILISED STRICTLY DURING EXECUTION OF ABOVE RELATED ITEMS OF WORK
522CESS Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56727441
AUTHORITY Government Departments
TENDER VALUE 13.90 Crore
LAST DATE 12-08-2026
Authority
Authority Name Orissa State Police Housing And Welfare Corporation Limited
Work Description Tender for Construction Of Administrative Building At Ofdra C Us Bhubaneswar, Khurda.
Basic Detail
Tender No 09/OPHWC/2026-27
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 29 Jul 2026
Submission Date 12 Aug 2026
Open Date 13 Aug 2026
Finance
Tender Value 13.90 Crore
Tender Fee 11800
EMD 13.90 Lakhs
Exemption Available
Document List
19170963-86f5-4f84-abfd-fa8ec052445f.html
ADMINBLDGOFDRAMERGED.pdf
ADMINISTRATIVEBLDGOFDRABBSR.pdf
BOQ_603681.xls
DTCN1.pdf
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Aug 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

19170963-86f5-4f84-abfd-fa8ec052445f.html

pdf

ADMINBLDGOFDRAMERGED.pdf

pdf

ADMINISTRATIVEBLDGOFDRABBSR.pdf

xls

BOQ_603681.xls

pdf

DTCN1.pdf

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders