Tender For Replacement Of Aluminium Bus-Bar Spares In Electrical Pillar Panels Along With Earthing Arrangements, Provision Of Ug Cables For Ro Plant And Other Associated Electrical Works At Csir-Clri Staff Quarters, Adyar, Chennai-600020
Tender Value
5.05 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
19 days left
EMD
10113
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Aluminium Bus-Bar Spares In Electrical Pillar Panels Along With Earthing Arrangements, Provision Of Ug Cables For Ro Plant And Other Associated Electrical Works At Csir-Clri Staff Quarters, Adyar, Chennai-600020
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Items |
| 2 | EARTH PLATE: Earthing with G.I earth plate 600mm x 600mm x 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long including G.I flat , each termination should be with suitable 2 set of G.I bolt, nut, spring washers of each run, testing earth resistivity of the Electrode and provision of 2'x2'x1' brick & cement chamber with 2'x2' RCC cover and including painting,marking of value etc. with charcoal/coke and salt as required. |
| 3 | G.I. PIPE LAYING: Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and floor/road cutting and finishing with PCC in original condition and wherever required based on site condition as directed and required by site Engineer etc. 100 mm dia |
| 4 | CABLE END TERMINATION: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4X16 sqmm |
| 5 | EARTH WIRE: Providing and laying earth connection from earth electrode with 6 SWG dia G.I wire in 15mm dia G.I pipe from earth electrode including connection with thimble excavation and refilling etc. as required. |
| 6 | MV CABLE LAYING:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/DWC/PVC pipe as required.Upto 35 sq. mm |
| 7 | DWC HDPE PIPE LAYING: Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (750 mm below ground level) including excavation and refilling the trench,etc.,complete as required.63 mm dia (OD-63mm & ID- mm nominal) |
| 8 | PAINTING OF EB PILLAR PANEL: Painting with aluminium paint of approved brand and manufacture to give an even shade: Two or More coats |
| 9 | THREE PHASE MANUAL CHANGEOVER SWITCH: Supply and fixing of 4 pole 100A Manual Changeover Switch surface mounting in wall, inclusive of all accessories and connection, earthing etc.as required. |
| 10 | THREE PHASE ON/OFF SWITCH FUSE UNIT: Supply and fixing of 4 pole 100A switch fuse unit with metal enclosure surface mounting in wall, inclusive of all accessories and connection, earthing etc.as required. |
| 11 | SUPPLY OF 4 x 16 SQ MM, ALUMINIUM UG CABLE: Supply of 4X16 sq mm, XLPE insulated, Sheathed and armored aluminium 1100 V grade as per IS 1554 Standard UG cable, produce with necessary test certificate etc. as required. |
| 12 | Supply and installation of 10 mm x 50 mm aluminium \\"C\\" type clamp with suitable bolt nut washer including mounting arrangements in the existing EB Pillar box etc. as required. |
| 13 | Supply and fixing of procelin insulator with suitable mounting plate including bolt nut washer with associated arrangements in the existing EB Pillar box etc. as required. |
| 14 | Supply and fixing of 10 mm x 50 mm aluminium bus bar with suitable bolt nut washer including 50 mm x 10 mm thick hylam sheet along with mounting arrangements in the existing EB Pillar box etc. as required. |
| 15 | Supply and fixing of 12 mm x 50 mm long G.I bolt & nut with double washer in existing \\"C\\" clamp, \\"Z\\" clamp.etc fixing the existing EB Pillar box etc. as required. |
| 16 | REMOVAL OF EXISTING OLD POWER PANEL: Removing of existing 3 phase Power panel and surface of wall/floor mounted & it incoming & outgoing's disconnecting the existing power cables connections without any damage and handed over to electrical division etc. The work also include providing temporary power supply to the essential existing loads as required.as directed by the site Engineer. |
| 17 | Buy Back Items |
| 18 | BUYBACK OF OLD MV PANEL: Buy back of existing Old Power Panel consists of Switch fuse unit with individual compartment,Copper/Aluminium Busbars etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender