Tender For annual repair & maintenance of Residential Building Under Svpnd, Apwd, Sri Vijaya Puram During 2026-27.S/W : Minor Repair And Renovation Of G-35 Type-Iv Qtr At Goalghar Under Deen Street Section, Sd-I, Svpnd, Apwd, Sri Vijaya Puram.
Tender Value
15.81 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
31631
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Residential Building Under Svpnd, Apwd, Sri Vijaya Puram During 2026-27.S/W : Minor Repair And Renovation Of G-35 Type-Iv Qtr At Goalghar Under Deen Street Section, Sd-I, Svpnd, Apwd, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 4 | For thickness of tiles 10 mm to 25 mm |
| 5 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : |
| 6 | Up to 10 mm thick |
| 7 | Dismantling wooden flooring including screws etc complete as per direction of Engineer-in-charge |
| 8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 10 | All kinds of soil. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 12 | 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 13 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 14 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 15 | Granite stone slab of colour black, Cherry/Ruby redArea of slab over 0.50 sqm |
| 16 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 17 | Granite work |
| 18 | Providing and laying heavy duty Digital Tiles (Dura Stone) of size 300x300mm in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 19 | Providing and fixing 12mm thick marine plywood (Green ply or equivalent) confirming to IS:710 over timber decking on existing floor with necessary nails etc complete as per the direction of Engineer-in-charge. |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 22 | Superior hardwood Cart-II (A) |
| 23 | Providing and fixing 12mm thick Superior hardwood cat-II (A) plank weather boarded walling fixed on frames with necessary nails etc complete as per the direction of Engineer-in charge (excluding the cost of frames which will be paid seperately). |
| 24 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 25 | 45 cm length15 mm nominal bore |
| 26 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 27 | 150 mm diameter |
| 28 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 29 | 15 mm nominal bore |
| 30 | Providing and fixing health faucet with 1.2 m long flexible tube and wall hook (Jaquar (Model No. ALD-573) or equivalent make) of aproved quality. |
| 31 | 15mm dia |
| 32 | Providing and fixing CP brass two way bib cock (Jaquar Code No. FLR-5041N or equivalent) of approved quality. |
| 33 | 15mm nominal bore |
| 34 | Providing and fixing C.P. Brass angular cock (Jaquar code No.FLR 5053N or equivalent) of approved quality confirming to IS:8931: |
| 35 | 15mm nominal bore |
| 36 | Providing and fixing CP brass towel ring (Jaquar Code No. ACN-1121 or equivalent make) of standard size with concealed fittings arrangement of approved quality. |
| 37 | Providing and fixing CP brass towel rail (Jaquar or equivalent make ) complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality. |
| 38 | 600mm long towel rail (Jaquar Code No. AQN-7711) |
| 39 | Providing and fixng C.P. Soap Dish holder (Jaquar Code No. AQN - 7731 or equivalent make) of approved quality with concealed fitting arrangements. |
| 40 | Providing and fixing C.P. wall mixer 3 in 1 system with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) of Jaquar Model No. CON-281KN or equivalent make etc complete |
| 41 | Providing and fixing homogeneous Polyvinyl chloride sheet /tile in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent including rolling with light wooden roller weighing about 5 kg. all complete as directed by Engineer-in-Charge, in approved colour and shade. |
| 42 | 1.5mm thick |
| 43 | 12 mm cement plaster of mix: |
| 44 | 1:4(1 cement: 4 fine sand) |
| 45 | Wall painting with interior emulsion paint of approved brand and manufacture to give an even shade |
| 46 | Two or more coats on new work |
| 47 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 48 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 49 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 50 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 51 | Two or more coats on new work |
| 52 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 53 | Finishing wall painting with exterior emulsion paint of approved brand and manufacture to give an even shade. |
| 54 | Two or more coats on old work. |
| 55 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 56 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 57 | One or more coats on old work |
| 58 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: |
| 59 | One or more coats on old work |
| 60 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing suficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. using melamine clear polish and melamine thinner mixed in required. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 61 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 62 | Foundations, footings, bases for columns |
| 63 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 64 | White solid plastic seat with lid |
| 65 | 25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with : |
| 66 | Superior hardwood cat-II (A) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender