Tender For annual repair & maintenance of Non Residential Building Under Svpnd, Apwd, Sri Vijaya Puram During 2026-27. Sw: Repair Of Plaster And Painting Including Replacement Of Old False Ceiling In Work Section Ces Office, Apwd, Under Supply Line,
Tender Value
4.84 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
9698
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Non Residential Building Under Svpnd, Apwd, Sri Vijaya Puram During 2026-27. Sw: Repair Of Plaster And Painting Including Replacement Of Old False Ceiling In Work Section Ces Office, Apwd, Under Supply Line, Sd-Ii, Svpnd, Apwd, Sri Vijayapuram.
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 2 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 4 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). |
| 5 | 6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862 :2000 |
| 6 | Providing and laying hollow cement concrete block walling 200mm thick consisting hollow block of size 400 x 200x200mm of mix 1:3:6(1cement :3 coarse sand:6 graded stone agg. 10mm nominal down size) having a crushing strength of 3.5N/mm2 at 28 days as per I.S. 2185 (Part-I) 1979 laid in cement mortar 1:6(1cement : 6 coarse sand) |
| 7 | Upto floor five level |
| 8 | 12 mm cement plaster of mix: |
| 9 | 1:4(1 cement: 4 fine sand) |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: |
| 11 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 13 | Two or more coats on new work |
| 14 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 15 | Two coats |
| 16 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). |
| 17 | Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer- in-charge. |
| 18 | Providing and fixing Computer Table (Size: Width 900mm x Depth 600mm x Height 780mm). Having provision of kept CPU, UPS, Keyboard ect. Table top shall be 24mm thick superior quality chemically treated, edge glued finger joined ISO specification's Rubco haut rubber wood panel board, side vertical/ horizontal support 18mm thick wood panels. After completing the carpentry works all the visible area will be sanding by N.60 & 80 wood sanding paper and apply Sheenlac/ Berger make Filler with mixing of NCD Thinner (Sheelac/ Berger make), then pasting chock putty on the shabby/ nailing area which will be sanding with No.120 sanding paper, thereafter apply sealer sheenlac/ berger make then cutting with No.320 Sand paper. Once complete the above said process shall spray Melamine polish of Berger/ Sheenlac make then sanding with No. 400 paper. Finally will apply silicon with soft Banyan Cloth for between shinning/ finishing. All complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender