Tender For Repair And Maintenance Of Desert Coolers And Voltage Stabilizers At Lgj Mil Stn Under Ge Lalgarh Jattan
Tender Value
25 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
16 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Desert Coolers And Voltage Stabilizers At Lgj Mil Stn Under Ge Lalgarh Jattan
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting the electrical and water connection of the desert cooler (any size and make) and taking down from its position installed at Ground/First floor/ Second Floor of Bldg from bracket/ stand, opening the side pannels and remove the unserviceable /dirty wood wool pad/khas khas pad, dismantle the front grill including piano type switches, regulators, rotary switches, etc. Scratching out the old paint from inner and outer surfaces of cooler with sand paper complete and cleaning to make smooth surface for painting, painting the inner side of the body with two coats of anticorrosive black paint by brush and outer surface with silver ash hammerton paint with spray gun machine including painting the air direction change grill, blade and fixing the desert cooler and its all parts complete as original and at original place including making water and electrical connections and testing etc. complete all as specified and as directed by Engineer-in-Charge.Note :- (i) The cost of Oiling/greasing, cleaning material and nut bolt/screws shall be included in the unit rate and nothing shall be paid extra on this account. (ii) Wood wool pad/Khas Khas pad, Air grill, side shutter, PVC pipe and any other parts as per requirement of desert cooler shall be measured and paid separately under appropriate item of this Sch. |
| 2 | Supply and fixing in replacement of fan motor Copper wound , 185 watt 1350 to 1400 RPM, 3 speed, single phase 230V AC supply for desert cooler including replacement of rubber pads and making necessary connection complete all as specified and directed by Engineer - in - Charge. Make Crompton Greaves/GEC/ Nelco/ American Universal/Khaitan / Cool Home |
| 3 | Supply and fixing in replacement front grill of desert cooler as per sample made out of GI sheet heavy duty and weight not less than 4kg complete all as specified and directed by Engineer - in – Charge.Note for item 03:- (i) Painting to grill shall be included in unit rate of Sch A srl item No. 01 here-in-before. |
| 4 | Supply and fixing in replacement complete body made out of 20 SWG GI sheet suitable for desert cooler of size 29\\"x29\\"x39\\" ,water tank depth 29\\"x29\\"x11\\" along with front grill and side shutters complete all as specified and directed by Engineer - in – Charge. |
| 5 | Supply and fixing in replacement MS Fan blade assembly of 450mm sweep for electric motor of Desert cooler as per existing size and Model complete all as specified and directed by Engineer - in - Charge. |
| 6 | Supply and fixing in replacement PVC Fan blade assembly of 450mm sweep for electric motor of Desert cooler as per existing size and Model complete all as specified and directed by Engineer - in - Charge. |
| 7 | Supply only Wood wool pads weight not less than 400 gms of any size bended with bamboo stick of superior quality and chicken wire mesh suitable for side panel of desert cooler complete all as directed by Engineer-in –Charge |
| 8 | Supply and fixing in replacement switch piano type, flush type 5 Amp, 240 Volts, single pole, one way complete all as specified. Make :- Kinjal / SSK/ Fine/Anchor |
| 9 | Supply and fixing in replacement of PVC distributor three way superior quality including nut bolt for fixing complete all as directed by Engineer-in –Charge |
| 10 | Supply and fixing in replacement of PVC Elbow superior quality suitable for desert cooler capacity complete all as directed by Engineer-in -Charge |
| 11 | Supply and fixing in replacement of PVC flexible pipe of size superior quality heavy duty suitable for desert cooler complete all as directed by Engineer-in –Charge. |
| 12 | Supply and fixing in replacement selector switch rotary type 3 speeds suitable for Desert Cooler including necessary connections complete all as directed by Engineer-in-charge. |
| 13 | Supply and fixing in replacement of capacitor 4 Mfd suitable for desert cooler motor complete all as directed by Engineer-in –Charge. |
| 14 | Supply and fixing in replacement of PVC submersible pump single phase 230V AC supply for desert cooler including making necessary connection complete all as specified and directed by Engineer - in - Charge. Make : AEC/Speed Nova/Cool Home |
| 15 | Supply and fixing in replacement Inner grill back side of desert cooler as per sample made out of GI sheet heavy duty and weight not less than 2 kg complete all as specified and directed by Engineer - in – Charge.Note - (i) Painting to grill shall be included in unit rate |
| 16 | Supply and fixing in replacement Inner grill Left and Right side (Side Shutters) of desert cooler as per sample made out of GI sheet heavy duty and weight not less than 4kg complete all as specified and directed by Engineer - in – Charge.Note for item 16:- (i) Painting to grill shall be included in unit rate |
| 17 | Supply only in replacement evaporator air cooler in steel body heavy duty (desert cooler) made out of 20 SWG GI sheet, 29x29x39 inches 90 ltrs or above water storage capacity with propeller cooler fan made out of hot deep galvanised steel thickness 1mm body and 2mm removal side and back panel single phase 230 volts of fan size 450 mm sweep with submersible pump of suitable size( maximum power consumption 250 watt) ISI marked having normal air flow capacity 4000cum/hr with float valve of 15mm dia, nut washer pvc connection of 15mm leakproof joint and all necessary arrangements to take water from GI pipe 15mm dia to air cooler note: (a) sufficient length of 3 core PVC sheathed round copper cable size 23/076 to enable fixing in to plug point shall be provided by contractor. |
| 18 | Supply and fixing in replacement of capacitor 6 Mfd suitable for desert cooler motor complete all as directed by Engineer-in –Charge. |
| 19 | Supply and fixing in replacement Plug top 3 pin 5 Amp, 240 volts, single phase complete all as directed by Engineer-in-charge. |
| 20 | Supply and fixing in replacement PVC insulated copper conductor flexible cable of size 30/0.25 or 1.5 Sqmm, 3 core, round complete all as directed by Engineer-in-Charge. Make:- Paragon/Finolex/Rallison/Standard/Havells/Plaza |
| 21 | Dismantling the unserviceable stabilizers 5/4KVA capacity, repair/ renewal of defective part, reassembling and refixing the same in position complete with prooving for satisfactory operation all as directed by Engr-in-Charge with replacement of following spare parts: - |
| 22 | Transformer |
| 23 | Digital Voltmeter |
| 24 | Relay set |
| 25 | Supply only in replacement voltage stablizer copper winding for automatic operation single phase naturally air cooled indoor type and designed for input variation between 90V to 300V, heavy duty with working input voltage stablizer at 230V with accuracy of (+)(-) 2.5% of capacity 5KVA Make: AULTEN, DIGIVOLT or equivalent |
| 26 | Supply and fix in replacement of float valve suitable for 20mm to 25mm pipe for desert cooler with all fittings complete and all as specified and as directed |
| 27 | Supply and fixing medium grade galvanized iron pipe 15 mm dia with all fitting complete and all as specified and as directed. |
| 28 | Supply and fixing medium grade galvanized iron pipe 20 mm dia with all fitting complete and all as specified and as directed. |
| 29 | supply and fix in replacement of stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both side for iron pipe or for unions and fixed 15mm with all fittings complete all as specifeid and as directed |
| 30 | supply and fix in replacement of stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both side for iron pipe or for unions and fixed 20mm with all fittings complete all as specifeid and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender