Tender For Development Of L-1 Classroom Of Abc Building In Iimc C Us.
Tender Value
50.09 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
3 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas South → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of L-1 Classroom Of Abc Building In Iimc C Us.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKSDSR Items: |
| 2 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | 20 mm thk. cement plaster of mix 1:4 (1 cement: 4 coarse sand) |
| 8 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase. |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal Wood |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 11 | Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete.18 mm thick |
| 12 | French spirit polishing :Two or more coats on new works including a coat of wood filler |
| 13 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm |
| 14 | Providing and fixing bright finished brass handles with screws etc.complete:250 mm |
| 15 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 16 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 1200 mm |
| 17 | Providing and fixing factory made uPVC glazed/wire mesh windows comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (wherever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of EIC. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.Three track three panels sliding window with Aluminium channelfor roller track, wool pile, nylon rollers with SS 304 body |
| 18 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by EIC.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 20 | Applying priming coats with primer of approved brand and manufacture, having low VOC content.With water thinnable cement primer on wall surface havingVOC content less than 50 grams/litre |
| 21 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the EICPolished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red |
| 22 | MARKET RATES |
| 23 | Providing & Fixing WOODWORKS Channelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm (2400mm x 192mm x 15mm), made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by LG1012 (G-13) of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.6. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm. Panel Weight ≅ 11kgs/m2 The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge. make (Make : Knauf Ceiling Solutions, Armstrong, Gordon, SAS, Ceilings Plus) |
| 24 | FURNITURE WORKS |
| 25 | 5 Seater Table Size-3500L X450 D X750 H Table top made of 18mm thk. BWR PLY BOARD with laminate with PVC edge banding. Tabletop supported on an understructure of 18mm thk BWR PLY BOARD Side and 18mm thk Modesty Panel with PVC Edge Banding The Seller / Company shall possess valid NABCB-accredited certifications including ISO 9001:2015, ISO 14001:2015, OHSAS- 18001:2007/ISO-45001:2018, ISO-50001:2018. Other Certifications : GRIHA V-2019, BIFMA Level 1 & 2 & BIFMA Compliant certificate (Minimum 25 products), Green Guard by UL/ Green Pro, Green Co, FSC or PEFC, Indian Design Mark. The relevant products of the OEM should be BIS: IS 17631, IS 17632, IS 17633 & IS 17634 certified as applicable in the product category. Also, the OEM should be ZED Gold Certified (MSME Sustainable (ZED) Certification) and an official Link/ Screenshot of The Product listing must be provided from “https://www.bifma.org/page/level” |
| 26 | 3 Seater Table Size-2000L X450 D X750 H Table top made of 18mm thk. BWR PLY BOARD with laminate with PVC edge banding. Tabletop supported on an understructure of 18mm thk BWR PLY BOARD Side and 18mm thk Modesty Panel with PVC Edge Banding The Seller / Company shall possess valid NABCB-accredited certifications including ISO 9001:2015, ISO 14001:2015, OHSAS- 18001:2007/ISO-45001:2018, ISO-50001:2018. Other Certifications : GRIHA V-2019, BIFMA Level 1 & 2 & BIFMA Compliant certificate (Minimum 25 products), Green Guard by UL/ Green Pro, Green Co, FSC or PEFC, Indian Design Mark. The relevant products of the OEM should be BIS: IS 17631, IS 17632, IS 17633 & IS 17634 certified as applicable in the product category. Also, the OEM should be ZED Gold Certified (MSME Sustainable (ZED) Certification) and an official Link/ Screenshot of The Product listing must be provided from “https://www.bifma.org/page/level” |
| 27 | Supplying and placing in position of medium back mesh chair in black colour with matte finish as per image. The medium back 360° degre revolving chair sku : nature/mb/eco , All over size is : 622mm(l)x 490mm(d) x 1105mm(h) ,*the chair made of full mesh in black colour . It will comes in matte finsih about style type is modern. Details :- Arms : fixed pp armsrest . Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat). Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , Back : frame of design shall be curved made of two pieces injection moulded frame cover with mesh .backrest support , adjustable lumbar support; mechanism : single locking mechanism .Only seat size is 660mm(l)x 610mm(d)x 470-570mm(h) . Seat maximum height is 570mm & minimum height is 470mm & back max height is @ 1130mm . Gas lift 100 mm telescopic haudraulic ; Base : 650mm nylon base with smooth castors The Seller / Company shall possess valid NABCB-accredited certifications including ISO 9001:2015, ISO 14001:2015, OHSAS- 18001:2007/ISO-45001:2018, ISO-50001:2018. Other Certifications : GRIHA V-2019, BIFMA Level 1 & 2 & BIFMA Compliant certificate (Minimum 25 products), Green Guard by UL/ Green Pro, Green Co, FSC or PEFC, Indian Design Mark. The relevant products of the OEM should be BIS: IS 17631, IS 17632, IS 17633 & IS 17634 certified as applicable in the product category. Also, the OEM should be ZED Gold Certified (MSME Sustainable (ZED) Certification) and an official Link/Screenshot of The Product listing must be provided from “https://www.bifma.org/page/level”. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender