Tender For Si Works Of Electrical Materials For Dormitory Construction Works At 1 St Floor Of Nscb Hostel At Iiser-Kolkata
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Aug 2026
13 days left
EMD
14000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Si Works Of Electrical Materials For Dormitory Construction Works At 1 St Floor Of Nscb Hostel At Iiser-Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable in surface / recessed PVCconduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm. FRLS PVCinsulated copper conductor single core cable etc asrequired.Group C |
| 2 | Wiring for circuit/submain wiring alongwith earth wirewith the following sizes of FRLS PVC insulated copperconductor, single core cable in surface/ recessed PVC conduitas required. |
| 3 | 2 X 1.5 sq. mm + 1 X 1.5 sq. Mm earth wire |
| 4 | 2 X 4 sq. mm + 1 X 4 sq.mm earth wire |
| 5 | 4 X 16 sq. mm + 2 X 6 sq.mm earth wire |
| 6 | Supplying and fixing following modular switch/socket on theexisting modular plate & switch box including connections but excluding modular plate etc. as required. |
| 7 | 5/6 A switch |
| 8 | 3 pin 5/6 A socket outlet |
| 9 | Supplying and fixing two module stepped & socket type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 10 | Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. |
| 11 | Supplying and fixing following size/ modules, GI boxalongwith modular base & cover plate for modularswitches in recess etc. as required. |
| 12 | 1 or 2 Module (75mmX75mm) |
| 13 | 4 Module (125mmX75mm) |
| 14 | 6 Module (200mmX75mm) |
| 15 | 8 Module (125mmX125mm) |
| 16 | 12 Module (200mmX150mm) |
| 17 | Supplying and fixing suitable size PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 18 | Supplying and fixing suitable size PVC box with modular plateand cover in front on surface or in recess, includingproviding and fixing 3 pin 5/6 A modular socket outlet and5/6 A modular switch, connections etc. as required. |
| 19 | Supplying and fixing suitable size PVC box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 Amodular switch, connections etc. as required. |
| 20 | Supply & fixing of Fan/Light point (PP ,Ceiling Rose) |
| 21 | Supply, Installation, Testing and Commissioning of LED batten fitting 40Watt x1200 mm long (Nominal size) having lumens output efficacy > = 110 lumens /watt and CCT=5700-6500 K (or as reqd.), with inbuilt electronic driver with efficiency shouldnot be less than 85% with surge protection 2.0 KV, IP-20rated and making connection with 1.5 sqmm. FRLS Copperconductor single core cable i/c earthing etc. as required. |
| 22 | Supply, Installation, Testing and Commissioning of LED Suface type square/round fitting 1 No. 18 W with Aluminum die cast housing with polycarbonate Optical cover, having lumens output efficacy > = 110 lumens /watt and CCT=5700-6500 K (or as reqd.), with inbuilt electronic driver with efficiency shouldnot be less than 85% with surge protection 2.0 KV, IP-20rated and making connection with 1.5 sqmm. FRLS Copperconductor single core cable i/c earthing etc. as required. |
| 23 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets arerequired.)8 way (4 + 24 ), Double door |
| 24 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA,\\"C\\" curve, miniature circuit breaker suitable for inductiveload of following poles in the existing MCB DB completewith connections, testing and commissioning etc. asrequired. |
| 25 | Single pole |
| 26 | Single pole and neutral |
| 27 | Four Pole |
| 28 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing andcommissioning etc. as required.100 A Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender