Tender For Construction Of Plant Protection Centre Kalbog In Tehsil Kotkhai Distt Shimla H.P (Sh:- Construction Of Building Portion, Ws & Si And Site Development Etc.)
Tender Value
22.15 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
6 days left
EMD
44400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Plant Protection Centre Kalbog In Tehsil Kotkhai Distt Shimla H.P (Sh:- Construction Of Building Portion, Ws & Si And Site Development Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m,as directed by Engineer-in-charge.Excavation for foundation trenches.All kinds of soil |
| 2 | Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out construction bracing removal of stumps and other deleterious material and disposal up to a lead of 50 m dressing of sides and bottom and back filling in trenches with excavated suitable material . |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 4 | Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden/steel battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work in:-ing carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidental charges in:- Foundation footing and basis of columns, etc. and mass concrete. |
| 5 | Suspended floors, roofs, landings, balconies and access platform |
| 6 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 7 | Stairs, (excluding landings) except spiral staircases |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 9 | Edges of slabs and break in floors and walls :- |
| 10 | Providing and laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202, & 1203.in cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) including all leads and lifts. As per HPPWD specification of 1990 volume-I, as directed by the Engineer IN charge. |
| 11 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8. Granular material including all leads and lifts a As per HPPWD specification of 1990 volume-I, as directed by the Engineer IN charge. |
| 12 | Providing weep holes in brick/masonry /stone masonry/plain rain forced concrete abutment wing wall return wall with 100 mm dia pvc pipe extending through the full with of the stricter with stop of 1(V) :20 (H) towards drawing face complete as per drawing and technical specification |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : |
| 18 | Random rubble masonry / polygonal rubble masonry (uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 cement:6sand:12 graded stones aggregate 20 mm nominal size) in cement mortor 1:6 (1 cement :6 sand) Including carriage of material within all leads and lifts. |
| 19 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 20 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 21 | 15mm cement plaster in single coat as pattern shown at corner on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials within allleads and lifts..1:6 (1 cement: 6 fine sand) Fair side |
| 22 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 23 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour |
| 24 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).(1st Class Deodar) |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1stclass hard wood and well matched teak 3 ply veneering with verticalgrains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 9.20 |
| 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 27 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 28 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 29 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 30 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. |
| 31 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.(mandana black border) |
| 32 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 33 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required |
| 36 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 37 | Providing and fixing Mixer for kitchen sink with casted swining spout at top.15 MM DI |
| 38 | C.P Brass pillar tap with capstan head |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 40 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 41 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 42 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 43 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete |
| 44 | Providing and fixing toilet paper holder : |
| 45 | Providing and fixing C.P Brass towel rail complete with C.P Brass brackets fixed to wooden plugs with C.P brass screws |
| 46 | Providing and fixing Chromium plated brass soap dish with C.P. brass brackets fixed to wooden plug with C.P. brass screws: |
| 47 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). |
| 48 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Internal work |
| 49 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE CompositePressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work |
| 50 | Providing and fixing soil, waste and vent pipes :Sand cast iron S&S pipe as per IS: 1729 100mm |
| 51 | Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto a height of 10 metres above ground level :- |
| 52 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 53 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. 20mm nominal bore :- |
| 54 | Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 55 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 56 | Providing and fixing PVC floor traps ISI marked finolex or equiplent I of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm x 90 mm |
| 57 | 110 mm x 75 mm |
| 58 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked Finolex or equiplent including fitting with approved adhesive etc. 110 mm dia |
| 59 | 75 mm dia |
| 60 | Providing and fixing M.S. holder bat clamps 100 dia of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : (75 mm dia ) |
| 61 | Providing and fixing PVC single equal branch with oval access door , ISI marked inolex or equiplent insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. 110 mm dia |
| 62 | 75 mm dia |
| 63 | Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. 110 mm dia |
| 64 | 75 mm dia |
| 65 | Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. 110 mm dia |
| 66 | 75 mm dia |
| 67 | Providing and fixing PVC collars ISI marked inolex or equiplent including fixing with approved adhesive etc. complete. 110 mm dia |
| 68 | 75 mm dia |
| 69 | Providing and fixing PVC plain bend ISI marked inolex or equiplent including fixing with approved adhesive etc. complete. 110 mm dia |
| 70 | 75 mm dia |
| 71 | Providing and fixing PVC offset 45°including fixing with approved adhesive etc. complete 110 mm |
| 72 | 75 mm dia |
| 73 | Providing and fixing PVC double equal branch with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. 110 mm dia |
| 74 | 75 mm dia |
| 75 | Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete. 110 mm dia |
| 76 | 75 mm dia |
| 77 | Providing and fixing PVC cowl including carriage of materials within all leads and lifts :- 110 mm dia. |
| 78 | 75 mm dia |
| 79 | Providing and fixing PVC 'P' or 'S' trap 110 mm dia phenolex or equiplent for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. |
| 80 | Providing and fixing G.I. Union 32 mm dia bore in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required |
| 81 | Providing & fixing C.P. 'S' trap (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carrage of material within all leads and lifts:-110 mm size |
| 82 | Providing and fixing CP brass bottle trap for wash basin and sink (32 MM dia) |
| 83 | Providing and fixing C.P. brass waste 32 mm dia (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials within all leads and lifts :- |
| 84 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia Flexible pipe |
| 85 | Providing and fixing 100 mm sand CP grating for gully trap. |
| 86 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 87 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 88 | Providing and fixing PTMT, push cock of approved quality and colour. |
| 89 | Providing and fixing C.P. brass stop cock (concealed) of standard esign and of approved make conforming to IS:8931. |
| 90 | Providing and fixing uplasticised PVC connection pipe with brass unions : 15mm nominal bore :- |
| 91 | Providing and fixing brass ball way valve( horizontal plunger type) high pressure with polythene plastic floats: 15mm nominal bore :- |
| 92 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 93 | Supplying and Fixing 300x300 mm Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): |
| 94 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 95 | Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) |
| 96 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 97 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 98 | Supply and fixing 455mmx610mm rectangular (HD560).precast C.Con cover With Frame of NTC make or Equivalent complete including carriage of materials within all leads and lifts :- . |
| 99 | Supplying and filing crushed stone aggregate in soakpit of following sizes including carriage of materials within all leads and lifts :-25 mm nominal size |
| 100 | Supplying and fixing 300 mm X 300 mm precast cover with frame for gully trap complete including carriage of materials within all leads and lifts :- |
| 101 | Providing and fixing 110 mm dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. |
| 102 | Providing and fixing 110 mm dia PVC cowl including carriage of materials within all leads and lifts :- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender