Tender For General-Urgent Maintenance To The Prefab Villas - 2Nos Near Mens Hostel-Kvasu Pookode -Dpr Preparation Work
Tender Value
3.39 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
0 days left
EMD
8491
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wayanad → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Urgent Maintenance To The Prefab Villas - 2Nos Near Mens Hostel-Kvasu Pookode -Dpr Preparation Work
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Aug-2026 | Date extension | Date | 07-Aug-2026 |
| 2 | 07-Aug-2026 | 2ND Date extension | Date | 10-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Maintenance work for prefab at Mens hostel |
| 2 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 3 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 4 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 5 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 6 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 7 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 8 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | 13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) |
| 11 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 12 | OD102106/2026-2027:Providing and fixing 1.3 mm thick homogeneous vinyl sheet in flooring and skirting/wall lining in approved pattern on a smooth and damp-proof base using rubber-based adhesive of approved quality and manufacture, including necessary surface preparation, cutting, laying, jointing and rolling with a light wooden roller, complete as directed by the Engineer-in-Charge, in approved colour and shade. |
| 13 | 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 14 | 9.55.1:Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges bright finishedwith necessary screws etc. complete :125x65x2.12 mm |
| 15 | 9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm |
| 16 | 9.97.5:Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm |
| 17 | 50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl |
| 18 | 50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall |
| 19 | 50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall |
| 20 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop |
| 21 | 50.9.15.2:Supplying and fixing 300 mm Aluminium aldrop |
| 22 | 17.28.1.2:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semi rigid pipe40 mm dia |
| 23 | 17.69.2:Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms |
| 24 | 17.31:Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 25 | 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap |
| 26 | 18.16.2:Providing and fixing brass stop cock of approved quality :20 mm nominal bore |
| 27 | 18.22.2:Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter |
| 28 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. |
| 29 | 18.58.1.1:Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia |
| 30 | 100.98.1009:Engaging Fitter ( grade 1). |
| 31 | 100.98.1028:Engaging Mason ( average). |
| 32 | 100.98.1010:Engaging Assistant Fitter or 2nd class fitter. |
| 33 | 100.98.1008:Engaging Coolie. |
| 34 | 100.98.1035:Engaging sewer man. |
| 35 | Electrical Installation Works |
| 36 | 1.8.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C |
| 37 | 1.8.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A |
| 38 | 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 39 | OD114416/2026-2027:Supplying and fixing following size/ modules, surface type PVC/Polycarbonate gang box along with cover plate for modular switches in recess as required - 6 Module (200mm X 75mm). |
| 40 | OD114415/2026-2027:Supplying and fixing following size/ modules, surface type PVC/Polycarbonate gang box along with cover plate for modular switches in recess as required - 3 Module (100mm X 75mm). |
| 41 | OD114414/2026-2027:Supplying and fixing following size/ modules, surface type PVC/Polycarbonate gang box along with cover plate for modular switches in recess as required - 2 Module (75mm X 75mm). |
| 42 | 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 43 | 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 44 | 1.23.4:Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet |
| 45 | OD114413/2026-2027:Supply, installation, testing and commissioning of PWD-approved 230 mm (9") sweep heavy-duty exhaust fan conforming to IS 2312, suitable for operation on 230 V, 50 Hz, single-phase AC supply, with high-quality ABS plastic body, copper-wound motor, shutter, bird guard, complete with all fixing accessories, connection materials, electrical connections, testing, and commissioning, including making good the wall/window opening, complete as required. |
| 46 | OD114411/2026-2027:Supply, installation, testing and commissioning of PWD-approved branded 9W LED bulb, suitable for 230 V, 50 Hz AC supply, with high-quality LED chip, energy-efficient driver, B22 base, PF>0.9, colour temperature 6500K (cool white), lumen output minimum 800 lm, including all mounting accessories, connection to existing wiring and fixing on wall/ceiling as required. |
| 47 | OD114412/2026-2027:Supply, installation, testing and commissioning of PWD-approved branded 20 W, 4-feet LED Batten Fitting, complete with integrated LED driver, polycarbonate housing and diffuser, suitable for operation on 230 V, 50 Hz AC single-phase supply, having minimum efficacy of 100 lm/W, cool white (6500 K) light output, CRI > 80, including all mounting accessories, connection to existing wiring and fixing on wall/ceiling as required. |
| 48 | OD114409/2026-2027:Supply Conveyance, installation, testing and commissioning of PWD-approved branded 50W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separately accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 49 | 90.15.4.9:Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 50 | OD114410/2026-2027:Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS XLPE insulated copper conductor, flexible three core cable in surface / recessed medium class PVC conduit as required - 3 core 1.5 sq.mm cable |
| 51 | OD114408/2026-2027:Supply, installation, testing and fixing of 8 mm diameter FRP (Fibre Reinforced Polymer) stay wire of approved make, suitable for outdoor electrical installations. The stay wire shall be manufactured from high-strength fibre composite material with non-conductive, UV-resistant, corrosion-resistant and weatherproof properties, having adequate tensile strength for supporting electrical poles and service lines. The work shall include supply of complete accessories such as stay grips, clamps, thimbles, fasteners and fixing hardware, including proper installation, alignment and tightening, complete as required. |
| 52 | 1.17.29:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm |
| 53 | OD114407/2026-2027:Supply, installation, testing and commissioning of 6A, 230V single adapter bulb holder of PWD approved make, made of high-quality heat-resistant insulating material, suitable for LED/CFL/incandescent lamps, complete with terminals, fixing accessories and connections, as required. |
| 54 | 2.12.2:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 55 | 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 10, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender