Tender For Repairs And Maintenance Of Non-Residential Government Office Building (Medical College Sub-Division I) During The Year 2026-27/ Sh:- Brick Work, Tiles Work, Plastering Work, Sanitary Fittings Etc.
Tender Value
13.48 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
0 days left
EMD
26972
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenance Of Non-Residential Government Office Building (Medical College Sub-Division I) During The Year 2026-27/ Sh:- Brick Work, Tiles Work, Plastering Work, Sanitary Fittings Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level andremoval of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. |
| 5 | i)1 : 3 : 6 ( 1 cement : 3 fine sand : 6 graded well burnt brick aggregate of 40 mm nominal size) |
| 6 | ii) 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 graded well burnt brick aggregate of 20 mm nominal size) |
| 7 | First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 8 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 10 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 12 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. |
| 13 | Dismantling old plaster or pointing raking out joints, cleaning and preparing the surface for replastering or repointing in/c disposal of rubbish to the dumping ground withall leads and lifts etc. complete as per direction of the Eng-in-charge. |
| 14 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.i) 0.63 mm thick with zinc coating not less than 275 gm / m2 |
| 15 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.i) 0.63 mm thick with zinc coating not less than 275gm/m2 |
| 16 | providing and fixing aluminium work for doors,windows ventilator and partition with extruted built up std. tubler section/ appropriate z section and other section of approved make comfering to IS.733 and IS 1285 fixing with dash fasteners of required dia and size in/c necessary filling up gaps at junction at top,bottom and side with required EPDM rubber / neoprene gasket etc .aluminium section shall be smooth rust free straight mitred and jointed mechanically wherver required in/c cleats angle aluminium snap beading for glazing/paneling C.P. brass/ stainless screws all complete as per architectural drawing and the direction of theEng-in-charge.( Glazing and paneling to be paid separately) |
| 17 | For fixed portion of approved quality :- Anodised aluminium (anodised transparent or dyed to required shade to IS1868 minimum anodic coating of grade AC.15) |
| 18 | For shutter/sliding shutter of doors windows & ventilator in/c providing and & fixing hinges pivots/roller and making provision for fixing fitting wherver reqd. in/c the cost of pvc/ neoprene gasket reqd. of app. Quality(Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to reqd to shade to IS 1868.minimum anodic coating of grade AC-15. |
| 19 | providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade) particle board grade-I, type-II confirming to IS : 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in penelling fixed in aluminium doors, windows, shutters and partition frames with C.P. brass /stainless steel screws all complete as per architectural drawing and the direction of the Eng-in-charge.(i) Prelaminated particle board of approved quality with decorative lamination on both side. |
| 20 | providing and fixing glazing of approved quality in aluminium doors,windows ventilator shutter and partition etc withEPDM rubber/ neoprene gasket etc complete. as per architrectural drawing and the direction of the Eng-in-charge.(cost of snap beading shall be paid basic item) |
| 21 | with glass/float glass panes of 4.00 mm thickness (weight not less than 10.00kg/ sqm) |
| 22 | providing wood work in frames of doors windows clerestory windows and other frames wrought framed and fixed in position.(i)Local teak wood :- |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 24 | Providing & fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade Ac 10 as per IS :1868)transparent or dyed to required colour shade with nuts and screws etc. complete |
| 25 | 300 x 16 mm:- |
| 26 | 250 x 16 mm:- |
| 27 | Providing & fixing aluminium tower bolt ISI marked anodised (anodic coating not less than grade Ac 10 as per IS 1868) transparent or dyed to required colour shade with nuts and screws etc. complete, |
| 28 | 250 x 10 mm:- |
| 29 | 150 x 10 mm:- |
| 30 | Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade Ac 10 as perIS 1868) transparent or dyed toreqd colour shade withnuts and screws etc. complete, |
| 31 | 125 mm |
| 32 | 100mm |
| 33 | Filling the gap in between aluminium frame and adjacent RCC/brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge:- (i) Upto 5 mm depth and 5 mm width. |
| 34 | Providing and fixing aluminium handles ISI markedanodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colouror shade with necessary screws etc. complete :100 mm |
| 35 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.i) Fixed to steel windows by welding. |
| 36 | 12 mm cement plaster of mixIn Cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 38 | Wall painting with acrylic plastic emulsion paint ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of TesCertificate issued by the Manufacturer] : Two or more coats on new work |
| 39 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. |
| 40 | Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth includingnecessary repairs to scratches etc. complete |
| 41 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 42 | Neat cement punning . |
| 43 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 44 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm,suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.i )With 15 mm thick tegular edged light weight calciumsilicate false ceiling tiles. |
| 45 | Providing 10mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame etc. complete as per direction of Engineer-in-charge. (frame work to be paidnseparately) :Curved surfaces |
| 46 | Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge.i) Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid)Size of tile 600 mm x 600 mm ( For Rooms) |
| 47 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge.i) 450 mm X 300 mm in all shades and design ( For Toilet) |
| 48 | Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 - 2017, of approved make, in all colours such as white, ivory,Grey, Fume Red brown laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge.i) Mat Finish tiles / Anti-Skid tiles / Glossy tilesSize of tile 300 mm x 300 mm (For Toilet ) |
| 49 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture ( Payment shall be made after submission of test certificate issued by the manufacture) (i) New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm) |
| 50 | Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work (one or more coats ) to give an even shade as required complete as per direction of the Eng-in-charge. |
| 51 | Painting on G.S. sheet with synthetic enamel paint ( one or more coats ) of approved brand and manufacture of required colour to give an even shade on old work including preparation of surface as required complete as per direction of the Eng-in charge. |
| 52 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 53 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. i) 10 litre capacity-White |
| 54 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 55 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings completeFlexible pipe 32 mm dia |
| 56 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340x410x265mm sizes respectively. |
| 57 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 58 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 59 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :i) Rectangular shape 453x357mm |
| 60 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External worki) 25 mm nominal outer dia .Pipes |
| 61 | ii) 40 mm nominal outer dia .Pipes. |
| 62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes |
| 63 | 25 mm nominal outer dia .Pipes |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall15 mm nominal outer dia .Pipes. |
| 65 | ii)20 mm nominal outer dia .Pipes |
| 66 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc. complete as per direction of Engineer-in-charge : |
| 67 | Single socketed pipe - 75 mm OD |
| 68 | Single socketed pipe - 110 mm OD |
| 69 | Providing and fixing brass bib cock of approved quality :i) 15 mm nominal bore |
| 70 | Providing and fixing brass stop cock of approved qualityi) 15 mm nominal bore |
| 71 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete :i) 20 mm dia. nominal bore |
| 72 | ii) 25 mm nominal bore |
| 73 | Providing and fixing uplasticised PVC connection pipe with brass unions :a) 45 cm lengthi) 15 mm nominal bore |
| 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion etc. complete as per direction of Engineer-in-charge : |
| 75 | Coupler |
| 76 | 75 mm |
| 77 | 110mm |
| 78 | Single equal tee with door |
| 79 | 75x75x75 mm |
| 80 | 110x110x110mm |
| 81 | Bend 87.5 |
| 82 | 110mm |
| 83 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender