Tender For Repair And Day To Day Maintenance Like Joinery, Floor, Roof, Sanitary Fittings Etc In Otm & Tech Area Of G & H Area Under Ge (Nw) Kochi
Tender Value
44.90 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
89800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Day To Day Maintenance Like Joinery, Floor, Roof, Sanitary Fittings Etc In Otm & Tech Area Of G & H Area Under Ge (Nw) Kochi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of premises complete all as specified and directed. |
| 2 | M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM 1:6 complete all as specified and directed. |
| 3 | M&L for coloured Ceramic tiles coloured light shade 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM 1:6 complete all as specified and directed. |
| 4 | M&L for glazed ceramic tiles coloured , as in vertical surfaces, size 350x 250x 7 mm/450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 5 | M&L for vitrified ceramic tiles light shade, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm each , laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match, including 15 mm thick Screed bed or bedding layer in CM (1: 6 ) complete all as specified and directed. |
| 6 | M&L for vitrified ceramic tiles light shade, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm, laid on vertical surfaces/ skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match vertical surfaces with backing coat of 10mm thick in CM (1:4) complete all as specified and directed. |
| 7 | M&L for pre polished Machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed bed or bedding layer in CM 1: 4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 8 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with mixture of pigment to match the shade of granite stone including grinding and polishing complete over 20mm thick cement screed in CM 1:4 complete all as specified and directed. |
| 9 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 10 | M&L for 40mm thick PCC type B-0 1:2:4 (using 12.5mm graded aggregate ) as in repair top surface of pavement and flooring etc. and surfacefinished even and smooth without using extra cement complete all as specified and directed. |
| 11 | Demolition of plain cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above gound level) complete all as specified and directed. |
| 12 | M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 13 | M&L for hard core of gauge exc. 63mm but n. exc 150mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specified and directed. |
| 14 | M&L for plain cement concrete type C1, 1:3:6 (20mm graded stone agg) 75 mm thick as in path/plinth protection and finished the surface even and fair without using extra cement complete all as specified and directed. |
| 15 | Dismanting wall/ceiling board (fibre pulp insulation) or insulation boards any thickness including cover filters complete all as specified and directed. |
| 16 | M&L for anodised aluminium snap grid frame work of size 605x605mm for false ceiling complete all as specified and directed. |
| 17 | M&L for hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 18 | M&L for 4mm thick non asbestos fibre cement building boards fixed to aluminium frame work complete all as specified and directed. |
| 19 | S&F in repair 4mm thick PVC false ceiling in any type of frame work all as sepcified and drected . |
| 20 | S&F in repair 12mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid frame work complete all as specified and directed. |
| 21 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 22 | M&L for second class hard wood scantling, clean sawn, 40 Sqcm and over in section, in framed work, complete all as specified and directed. |
| 23 | Dismantling timber framed work scantlings under 40 sq. cm in section, in fillets, rails, posts, rafters, purlins etc, complete all as specified and directed. |
| 24 | M&L for second class hard wood plain fillets square ,rectangular any section clean sawn, secured with nails or brads, sectional area exc 6 sq cm and n exe 13 sq cm, complete all as specified and directed. |
| 25 | M&L for second class hard wood plain fillets square ,rectangular any section clean sawn, secured with nails or brads, sectional area exc 13 sqcm and n exe 25 sqcm, complete all as specified and directed. |
| 26 | M&L for preparing surfaces of wood and wood based materials,new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and directed. |
| 27 | Dismantling of boarding of any description,fixed in any position with nails complete all as specified and directed. |
| 28 | M&L for 4mm thick ACP sheet as in ceiling and eves board including cutting and fixing with screw and 40x40x2mm MS Tubes in between to wall and wall end ACP sheet complete all as specified and directed. |
| 29 | Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and directed. |
| 30 | Dismantling tile battens of any size including tiling fillets spaced exc 15 cm centre to centre complete all as specified and directed. |
| 31 | S& F second class hard wood clean swan battens for tiles fixed at 30 cm centre to centre, Sectional area exc 5 sqcm and nexc 15 sqcm complete all as specified and as directed. |
| 32 | All as per item No 31 above but fixing only battens (battens shall be used obtained from dismantlings) complete all as specified and directed. |
| 33 | M&L for preparing surface of tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with creosote complete all as specified and directed. |
| 34 | M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed. |
| 35 | All as per item No 34 above but except tiles( tiles obtained from dismantlings shall be used) complete all as specified and directed. |
| 36 | M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry on RCC sloprf roof and chajja fxied with cement mortar (1:4) including dismantling of old tiles complete all as specified and directed. |
| 37 | M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed. |
| 38 | All as per item No 37 above but except tiles( tiles obtained from dismantlings shall be used) complete all as specified and as directed. |
| 39 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (jointing shall be done with solvent cement) complete all as specified and as directed . |
| 40 | S&F PVC (SWR) bends, any radius, 110mm bore all as specified,complete all as specified and as directed . |
| 41 | S&F in repair PVC eaves gutter 180mm dia, semi circular with all necessary fittings, joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and directed ( Height up to 12 mtr) |
| 42 | S&F in repair 180mm bore PVC (SWR) rain water pipes , with all necessary fittings (except bend), joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and directed |
| 43 | S&F 180mm bore PVC (SWR) bends, any radius, fixed with rubber ring joints all as specified ( Height up to 12 mtr) |
| 44 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete all as specified and as directed . |
| 45 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws (upto 15m height) complete all as specified and as directed. |
| 46 | S&F pre-painted plain sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding, fixed with screws all as specified and directed. |
| 47 | M&L for 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts in roof and walls complete all as specified and directed. |
| 48 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 49 | S&F roof truss (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 50 | M&L for mild steel rolled sections confirming to Fe 410 -W (Gde-E- 250) quality- A as in main and cross beams, hip and jack rafters; and purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 51 | M&L for mild steel rolled sections confirming to Fe 410 -W (Gde-E- 250) quality- A framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheet in or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel door fitting and also fastening complete all as specified and directed. |
| 52 | Dismantling hangar door shutter carefully and re-errection in position (incl structural steel members such as channels, angle iron, flat iron, beam etc and steel section of any description) area of the shutter n exc 40 Sqm and one coat of synthetic enamel paint complete all as specified and directed.Note : The unit rate quoted shall be deemed to be inclusive of scaffolding height upto 15m maximum. |
| 53 | M&L for removal of existing wheel iron bottom of hanger doors including replacing of its bearing if necessary and refixing the same in the door, incl cutting/welding greasing oiling etc complete all as specified and directed.Note : The unit rate quoted shall be deemed to be inclusive of necessary jack and other required machinery. |
| 54 | M&L for removal of existing wheel iron/brass top of hanger doors including replacing of its bearing if necessary and refixing the same in the door all as directed, including cutting/welding greasing oiling etc complete all as specified and directed.Note :(i) The unit rate quoted is deemed to be inclusive of scaffolding height upto 15m maximum.Note : (ii) Sl No 52, 53 & 54 Complaints need to be attended within 48 hrs. If the contractor fail to attend the complaint recovery @ 500 per day per complaint shall be effected from the amount due to the contractor.(iii) If three is any major complaint pertaining to hanger or any emergency situation immediate cervice has to be provided by the contractor even in holidays without any extra cost. |
| 55 | M&L for cleaning of rolling shutter and applying greasing on steel surfaces in side channels for smooth functining of all steel members complete all as specified and directed. |
| 56 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not oterwise described and applying two coats of epoxy coated paint over one coat of epoxy primer ( Height up to 15 mtr) complete all as specified and directed. |
| 57 | S&F in repair wire netting of stainless steel wire 1.4 mm dia and 25 mm x 25 mm mesh size fixed to snap grid frame work as in bird prrofing and securing with aluminium angle cleat of size 12 x 12 mm x 1.4 mm with two reivets or 1mm dia copper wire complete all as specified and directed. |
| 58 | S&F in repair Aura 500 mm dia Turbo Ventilator made out of Aluminium with Fluro Carbon coating with additional fan leaves for efficient removal of warm and stale air with high quality Japanese NSK bearing No 6201z &6202z with suitable base plate made out of aluminium and suitable for installing on metal sheet and aluminium sheets including cutting and making holes of required size on existing roof for fitting the same or similar work to reach the height upto 20 metres etc complete all as specified and as directed. |
| 59 | M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 60 | M&L for preparation of old painted steel and iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 61 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 62 | M&L for removal of vegitation/ shurb growth over walls,roof chajja,gutter up to four storey building cleaning the surface and spraying acid of required concentration and quantity making good holes with cement mortar(1:3) or cement concretew 1:3:6 type C1 each hole not exceeding 0.10 sqm area including necessary scafolding etc complete all as specified and as directed. |
| 63 | M&L for preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of Appex Ultima protek top coat complete all as specified and as directed. |
| 64 | M&L for preparation of old painted steel and iron surface of any description over 10cm width or girth and applying one coat of epoxy anti corrossive paint over a coat of primer for truss work (approximate 15 Mtr height complete all as specified and as directed. |
| 65 | Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm complete all as specified and directed. |
| 66 | Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm and but n exc 4 Sqm complete. |
| 67 | Taking down shutters of any description area not exceeding 1 Sqm each complete all as specified and directed. |
| 68 | Taking down shutters of any description area exceeding 1 Sqam but not exceeding 2 Sqm each complete all as specified and directed. |
| 69 | Taking down shutter of any description not exceeding 1.00 Sqm including re-securing or easing and adjusting and refixing in same opening complete all as specified and directed. |
| 70 | Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm including re-securing or easing and adjusting and refixing in s ame opening complete all as specified and directed. |
| 71 | S&F 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 72 | S&F 2nd class hard wood 30mm thick glazed,gauged and skeleton shutters, open rebated and prepared to receive glass,gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(a). |
| 73 | All as per item No 79here-in-before but divided into square with sash bars, any numbers |
| 74 | S&F 2nd class hard wood 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass, guaze etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass,gauze etc size of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a). |
| 75 | S&F 2nd class hard wood 35mm thick panelled shutter plain, framed, panelled (any member of panels) with panel of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 76 | S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 77 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading & jointed together with solvent cement all as specified and shown on drawing. |
| 78 | S&F aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and directed. |
| 79 | S&F in repair aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and directed. |
| 80 | S&F aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified and directed. |
| 81 | S&F in repair aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified and directed. |
| 82 | S&F aluminium anodised barrel tower bolt extruded section of 100 mm long complete all as specified and directed. |
| 83 | S&F in repair aluminium anodised barrel tower bolt extruded section of 100 mm long complete all as specified and directed. |
| 84 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 85 | S&F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 86 | S&F stainless steel butt hinges medium weight for 100mm size complete all as specified and directed. |
| 87 | S&F extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and directed. |
| 88 | S&F in repair extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and directed. |
| 89 | S&F extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and directed. |
| 90 | S&F in repair extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and directed. |
| 91 | S&F aluminium plate type II gate and shutter hooks and eyes of 200mm size complete all as specified and directed. |
| 92 | S&F in repair tubular towel rail 20mm dia brass chromium plated with brackets fixed in repairs 60cm long complete all as specified and directed. |
| 93 | S&F in repair stainless steel curtain rail bright finished 25 mm dia decorative type complete all as specified and directed. |
| 94 | S&F in repair stainless steel bright finished decorative brackets/finials for curtain rail 25mm dia. complete all as specified and directed. |
| 95 | S&F in repair door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair in floor, 140mm over length of cover plates complete all as specified and directed. |
| 96 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 97 | S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 98 | S&F in repair sheet glass ordinary quality 3.00 mm thick and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 99 | S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed. |
| 100 | S&F in repairs vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and directed. |
| 101 | S&F in repair plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or alumininsed hinging device complete all as specified and directed. |
| 102 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete all as specified and directed. |
| 103 | S&F in repair Vitreous China Urinal, Half stall type, white all as specified excluding flushing pipe and waste pipe complete all as specified and directed. |
| 104 | S&F in repair Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed. |
| 105 | S&F in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and directed. |
| 106 | S&F 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 107 | S&F in repair SS soap dish complete all as specified and directed.Make : Parryware Cart part No.T6902A1 or equivalent make as per approved list of manufactures. |
| 108 | S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 grams) complete all as specified and directed. |
| 109 | S&F in repair mirror of selected quality glass 600mmx450mm beveled edge, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 110 | S&F in repairs PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms complete all as specified and directed. |
| 111 | S&F in repair waste coupling of PTMT 32mm bore dia (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed. |
| 112 | M&L for 2 mm thick High Performance Modified Self-Adhesive Membrane SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy-to-peel silicon film on the other side on roof including cleaning and preparation of surface complete all as specified and directed.Make : STP Ltd or equivalet make as approved by GE. |
| 113 | Taking down cement plaster on brick/concrete wall and ceiling surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 114 | M&L for cement plaster in two coat 8 mm thick in cement mortar 1:4 using WPC over 12mm in cm 1:6 on external surfaces finished even & smooth without using extra cement all as directed. (Note: WPC shall be measured and paid seperately) |
| 115 | M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and directed. |
| 116 | M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 117 | M&L preperation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coat of cement base paint over a coat of priming complete all as specified and directed. |
| 118 | M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 119 | M&L for preparation of new plastered surfaces of wall (plastered or unplastered) including cornices and applying two coat of distember oil emulsion over a coat of primer complete all as specified and directed. |
| 120 | M&L for applying 1.5mm thick wall care putty on old and new plaster surface of wall complete all as specified and directed. |
| 121 | Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after reparing and make functional including replacement of fitting and fixture for proper functioning as required all as specified and as directed. |
| 122 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 123 | S&F in repair dorset mortise dead lock 75mm length two lever,brass body suitable for Aluminium door complete all as specified and directed. |
| 124 | S&F in repairs aluminum mortice lock verticle type 75 mm 4 levers all as specified and directed. |
| 125 | S&F for powder coated aluminium anodised frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc.(minimum thickness of powder coating 50 micron), complete shall as specified, and as directed. |
| 126 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos) and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified. |
| 127 | S&F anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos) and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified. |
| 128 | S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) sliding window and ventilator frame without sash bar including all necessary jointing cleat , hold fasts , rubber gasket, anodised snap beading, anodised aluminium fitting such as aluminium fitting such as 'F' channel if required for wire mesh or aluminium grill, aluminium handle, locking arrangement etc based on HINDALCO catalog No. specified below and as directed by the Engineer- in Charge.1. 4095 - 61.98x29.70x1.60 mm = 2 Track 2.9777 - 39.00x20.00x1.60 mm = Shutter Vertical3. 3994 - 41.00x20.00x1.20 mm = Shutter top & Bottom.4. 9778 - 39.00x20.00x1.50xmm = Shutter Vertical Inter Lock |
| 129 | S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beadings crews etc. complete all as specified and directed by Engineer-in-Charge. |
| 130 | S&F in repair aluminium powder coated frame work for partition (area of panel not exceeding 1.50 sqm each) with out sash bar,including all necessary jointing cleats, hold fasts, hinges with fixing clips,rubber gasket,anodised snap beading,anodised aluminium fittings,locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for partition is catlogue No 9223 of size 63.58x38.10x2.00 mm (single partition vertical &horizontal sections) of Hindalco or equivalent make as approved by GE complete all as specified and as directed . |
| 131 | S&F UPVC Ventilator frame shall be made of PVC material conforming to IS 10151. of the ventilator frame of extruded UPVC section having over all dimensions 100 x 62 x 50mm having wall thickness 2mm (+) or (-) 0.2mm, corners of wall frame shall be joined by MS galvanised bracket joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm (+) or (-) 0.1mm and the tie rod sahll be provide at the bottom of the frame.The ventilator system should be glazed with 5.5mm thick glass of size as required in ventilator frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements, complete all as specified and as directed. |
| 132 | Providing and fixing factory made uPVC white colour Sliding window Three track, Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drillingof holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steelFrame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed tothe wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mmnominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 133 | All as per item 131 here in before but area exceeding 2.00 sqm each complete all as specified and directed. |
| 134 | M&L for toughened TINTED glass 5.0 mm thick of selected quality , fixing to the frame any type complete all as specified and directed. |
| 135 | S&F 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 136 | M&L for 4.8mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and directed. |
| 137 | S&F 4.00mm thick frosted glass pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane |
| 138 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 139 | S&F anodised aluminium grill powder coated of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge. |
| 140 | Demolition of reinforced cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 141 | M&L for providing pre-cast cement concrete 1: 2 : 4 type B1 using 20mm stone aggregate as in cover slab, shelves, cooking slab and similar articles and set in CM 1: 6 including necessary formwork complete all as specified and directed. |
| 142 | M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 143 | M&L TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 144 | S&F in repair steel rolling shutters, (lath thickness 1.25mm) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and as directed. |
| 145 | S&F in repairs 6mm thick PVC heavy grade hollow profile designer panel of approved quality and design in wall panelling for including all beadings and batans, machiching aluminium angles at wall/ window cornners complete all as specified and directed by Engineer-in-Charge. |
| 146 | Surface Preparation: Clean the surface using grinders/scarifies is recommended to prepare the surface and ensure that the surface is free from dust prior to appliction of primer.Cracks & construciton Joint treatment: Cracks should be cut open with hand griding machine and applyb shaliPrime 2E as a primer and fill the grooved area with ShaliFloor SLUL 3ES.Priming: Apply ShaliPrime 2E as a primer coat with the help of brush/roller @ 200 gms/Sqm, and allow it to dry for 12 hrs.Epoxy screed (self leveling Undr Lay) : Apply ShaliFloor SL UL 3ES with notched trowel over the primed surface to achive the desired thickness @ 3.7 Kgs for 2mm thickness and allow it to dry for 24 hrs.Top Coat : AppShaliFloor SL 3 EPU with Trowel over the Epoxy Screed with 1 mm self leveling pigmented @ 1.6 kg per sqmt of STP make completely as per company specification of approved colour complete all as specified and directed by Engineer-in-charge.Note : The unit rate quoted is deemed to be inclusive of material required, tools and plant. |
| 147 | Demolition of brick work or stone, boulder, precast PCC block masonry including all quoins, arches, pillar, etc. built in cement mortar or cement lime mortar complete all as specified and directed. |
| 148 | M&L for pre-cast cement concrete block masonry with solid blocks, Type C1, 1:3:6 (using 20mm graded stone aggregate) exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed. |
| 149 | S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 150 | S&F in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender