Tender For Special Repair And Replacement Of Firefighting Equipment, Capacitor Panels And Connected Works At Afac Coimbatore.
Tender Value
9.20 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
0 days left
EMD
18400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair And Replacement Of Firefighting Equipment, Capacitor Panels And Connected Works At Afac Coimbatore.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply only fuel filter element spin one type suitable for diesel engine fire pumpset 50 HP all as directed |
| 2 | Supply only oil filter element Spin one AL type suitable for diesel engine fire pumpset 50 HP all as directed |
| 3 | Supply only Engine Oil for diesel driven pumpset 50 HP pump set as per manufacturers recommendatiom complete as as specified and directed by Engr-in-Charge |
| 4 | Supply and fix detector complying with certified EN 45 addressable type smoke detector phedelectric/optical with base with self built inteligence as per IS 11360 including taking down unserviceable detectors any type all as directed |
| 5 | Supply and fix remote response indicators including taking down unserviceable detectors all as directed |
| 6 | Supply and fix fire alarm sounderisiren electronic type horizontal two stage continuoues operation for alleast 50 minits with sound level 65 db to 120 db measured with sound output variation of +5db of distance 500 mtr range including taking down unserviceable sounder all as directed |
| 7 | Supply and fix CP hose 15 meter legnth for fire fighting system including taking down unserviceable hose pipe all as directed |
| 8 | Supply and fix pressure switch universal type including taking out unserviceable switch all as directed |
| 9 | Material and labour for painting of steel/iron surfaces of pipes any description over 10 cm in width or girth with cleaning, preparation of old painted surfaces and two coat of Synthetic enamel fire red paint of stand post rising pipes in any postion/height including standards, braces, rails, stays etc all as specified and as directed |
| 10 | Material and labour for any type fire alarm panel (Remote/manual miode) servicing, configaration, testing for proper function, alarm location indication, interconnection of repeter panel, dial and speach option of panel etc for of 4 loop with three cards fire alarm panel minimum 190 detectors per card, rectification of defects at any situation zone to zone vise all as directed |
| 11 | Supply, layig connecting, testing and commissioning of 15 Sqmm 2 core mullistanded PVC insulated copper conductor heavy duty electric cable conductor 1100 volts laid in trenches, floor, fixed to walls/drawn through pipe/conduit, duct or along the pole and including the disturbence surface of road making good with using PCC foxing the cable with suitable size glands, bottle type lugs etc including taking down unserviceable cable all as specified and directed. Make: Havells/Polycab/Finolex/Paragon/Gloster/Nicco |
| 12 | Supply and fix SMPS based automatic floot cum bost battery charging unit suitable for 12 volts lead acid battery 180 AH for existing fire fighting control panel with following parameters Voltage 12 volt frequency 50 HZ DC current 10 to 20 amps, input up to 270 Volts, output 12 Volt, Short circuit, over volatge, reverse polarity protection, fan cooling type, auto cut system during the time of engine working condition including taking down unserviceable chrger unit all as directed |
| 13 | Supply and fix lead acid battery 12 volt 150 AH heavey duty model XP 1500 for suitable for 60 hp pump set Make Exide. Tata, Amaron |
| 14 | Supply and fix pressure gauge 820 cm dia dial 0 to 21 kgs rating in any position including taking down unserviceable pressure gauge all as directed |
| 15 | Supply and fix butterfly valve 80 mm dia with necessary nut bolts washer, gaskets including taking down unserviceable valve in any situation/height, necessary welding/cutting where required and making good the surface with existing finish all as directed |
| 16 | All as per item No 15 above but 150 mm dia butterfly valve complete |
| 17 | All as per item No 15 above but 100 mm dia butterfly valve complete |
| 18 | Supply and fix in replacement Hose reel drum 30m including taking down old hose real drum all as directed |
| 19 | Supply and fix Gl pipe heavy duty of size 100 mm including necessary fitting and fortures in any situation and height including taking down unserviceable pipe all as directed Make- Jindal, Tata, etc |
| 20 | Supply and fix in replacement Hose box made of 18 gauge MS Sheet 800mm x 600mm X 250mm with d door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside yard all as specified and as directed |
| 21 | S&F in replacement Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short |
| 22 | Supply and fix cast iron sluice valve of size 100 mm dia flanged of class PN 1.6 confirming to IS with nibber Ea gasket joints bolts nuts etc. complete including taking down the old unsv sluice valve. |
| 23 | All as per item No 22 here in before but 80 mm dia bore. |
| 24 | All as per item No 22 here in before but 50 mm dia bore. |
| 25 | Supply and fix Cl Non return valve flanged type heavy duty confirming to IS with rubber gaskat joints bolts E nuts etc complete 100mm dia bore. |
| 26 | All as per item No 25 above but 80mm dia |
| 27 | Material labour servicing/overhauling of the fire pump & motor 50 HP coupled with motor by dismanling from J common base frame greasing the motor & pump bearings etc assembling the pump with new packing materials nuts and bolts, washers and checking the alignment disconect/reconnecting up delivery, suction pipes, electrical line and testing complete including painting with two coats of synthetic enamel paint with marking the MES Ne on frame including necessary transportaion to workshop and back all as directed. |
| 28 | Supply and fix lithium power 3/9 Volts AA type CR 123A suitable for remote operated fire alarms/paneis including Ex taking down unserviceable batterys any type all as directed |
| 29 | Material and labour for disconnect/reconnect the electrical connection, pipe line in terace motor control panel Ea servicing of the panel for its proper function to ensure the AUTO/Manual mode with respect to presure switch seting pressure with replacement the minor parts such as selector switch/ NO/NC contacts, replacement of starter, testing of the same after complete the repair work all as directed, Note (1) The starter switch measured and paid separately |
| 30 | Supply and fix starter assembly of capacity 50 HP FASD type AC three phase 415 volts 50 HZ wit irbuilt En timer/NONC contactors, OL protection suitable to existing fire control panel frame size including taking down unserviceable startor assembly all as diredcted Make-L&T, Havells, ABB, Schinider |
| 31 | Supply and fix starter assembly of capacity upto 10 HP FASD/DOL type AC three phase 415 volts 50 HZ wit Ea inbuilt timer/NONC contactors, OL protection suitable to existing fire control panel frame size including taking down unserviceable startor assembly all as diredcted Make LAT, Havells ABB, Schinider |
| 32 | Supply and fix fire brigade inlet connection valve with wheel head 2 way suitable to existing stand post including taking down unserviceable valve all as directed |
| 33 | Supply and fix hydrent valve single headed valve with wheel head suitable to existing stand post including laking Ea down unserviceable valve all as directed |
| 34 | Supply and frong Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 50 mm. E class-1 complete includingy taking down unserviceable valve all as directed |
| 35 | Supply and fixing cast iron body foot valve conforming to IS 4038 of size 100 mm dia including dismantling of E foot valve in any situation all as directed Make - Kirloskar, BIR, Venus |
| 36 | All as per item No 35 above but 80 mm dia |
| 37 | All as per item No 35 above but 50 mm dia |
| 38 | Supply and fix in replacement gun metal gate valve heavy duly ISI marked with iron wheel head screwed both E ends for iron pipes 25 mm bore dia including taking down unserviceable valve all as directed |
| 39 | Supply and fix in MCCB 4 Pole 415V, adjustable type, 160 Amps with Breaking Capacity 36 KA of existing frame E including taking down unserviceable MCCB all as specified and as directed Make L&T, Havells, ABB, C&S |
| 40 | Supply and fix in MCCB 4 Pole, 415V, adjustable type, 200 Amps with Breaking Capacity 36 KA of existing frame E including taking down unserviceable MCCBall as specified and as directed. Make L&T, Havelis, ABB, C&S |
| 41 | Supply, layig, connecting, testing and commissioning of 16 Sqmm 4 Core under ground LT cable XLPE insulated screened PVC bedded, armoured heavy duty electric cable confirming to IS 7098-1985 with stranded aluminium conductor 1100 volts laid in trenches, floor, fixed to walls/drawn through pipe, duct or along the pole and incl the disturbence surface of road making good with using PCC fixing the cable with suitable size glands crimping type lugs etc all as specified and directed. Make Havells/Polycab/Finolex/Paragon/Gloster/Nicco |
| 42 | Supply, layig, connecting, testing and commissioning of 6 Sqmm 4 Core LT cable XLPE/PVC insulat insulated un armoured heavy duty electric cable stranded copper conductor 1100 volts laid in duct floor, fixed to walls/drawn through pipe, duct or along the pole fixing the cable with suitable size glands, bottle type lugs etc all as specified and directed Make Havells/Polycab/Finolex/Paragon/Gloster/Nicco |
| 43 | All as per item No 42 above 10 Sq mm 4 core |
| 44 | Supply & fixing testing & Commissioning of Ci sluice valves of size 150 mm bore, class PN 1.6 ISI mark flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with including nut and bolts washers and rubber gasket, taking down old unsv sluice valve complete all as specified and as directed |
| 45 | Supply & fixing Fire Hydrant Valve 63mm Single Outlet Landing Valve with 80mm Flanged Inlet and SS-316 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender