Tender For Repairs To Hard Standing, Foothpath, Interlocking Tiles, Boundry Wall, Security Wall, Steel Grill/Grating And Other Certains B/R Works At Afs Amla
Tender Value
35 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
16 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Hard Standing, Foothpath, Interlocking Tiles, Boundry Wall, Security Wall, Steel Grill/Grating And Other Certains B/R Works At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of unreinforced cement concrete as in ground floor and paving not exc 15 cm thickness below or above GL complete all as specified and directed. |
| 2 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry or laid dry and pointed complete all as specified and directed. |
| 3 | M&L for 60mm thick factory made chamfered edge cement Concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 4 | All as per item No 03 above but except tiles complete all as specified and directed. |
| 5 | M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 6 | All as per item No 05 above but except tiles complete all as specified and directed. |
| 7 | M&L for glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | M&L for Paver tiles 8 to 12mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm (Make : Endurajohnson, Paver Orient Bell or equivalent in Somany) in floors set , jointed and provided joints filled and grouted with epoxy based joint filler including 15 mm thick screed bed or bedding layer in cement mortar (1:6) over cement concreteas approved to match complete all as specified and directed . |
| 9 | M&L for 100mm thick, PCC 1:3:6 type D-2 (using 40mm graded stone aggregate) as in sub base , complete all as specified and directed. |
| 10 | M&L for 150mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in floor or hardstanding fair and even spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed |
| 11 | M&L for forming 12mm thick expansion joint filled with preformed bituminous filler board and top 30mm primed and sealed with sealing compound grade 'A' for thickness of concrete slab 150 mm thick complete all as psecified and directed. |
| 12 | Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed. |
| 13 | M&L for birck work with fly ash brick 75 kg/cmsq compressive strength old size , is straight or curved on pian exc. 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 14 | All as per item No. 13 above but except brick complete all as specified and directed.Note : All type bricks retrieved from item No. 12 will be used. |
| 15 | M&L for hardcore (broken stone of guage n exc. 63 mm depositing spreed and levelled in layers n .exc 15 cm thick) watering and ramming to a true complete all as specified and directed. |
| 16 | Taking down cement plaster in any description including raking out joints, hacking for key scrubbing down with water complete all as specified and directed. |
| 17 | M&L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or stone masonry surfaces complete all as specified and directed. |
| 18 | M&L for preparing new surfaces of walls and applying two coat of cement base paint over a coat of primer including use of scaffoldings complete all as specified and directed. |
| 19 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of dia 110mm complete all as specified and as directed. |
| 20 | M&L for PCC 1:3:6 type C-2 (using 40 mm grraded stone aggregate) as in surface channels and drains finished with extra cement smooth channel complete all as directed |
| 21 | M&L for 18-20mm thick granite of any colour (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window cills, corner shelf, cooking plateforms and like over 15mm thick screed bed in CM 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite and rounding and chamfering of projected portion and dismanling of existing marble /granite etc complete all as specified and directed. |
| 22 | M&L for complete removal of existing treatment of any numbers of coat and preparation of concrete and plastered suface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of any colour with a coat of primer etc as in kerb stone etc complete all as specified and as directed. |
| 23 | M&L for preparation of concrete and plastered suface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of any colour with a coat of primer etc as in kerb stone etc complete all as specified and as directed. |
| 24 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and demolition of existing stones complete all as specified and directed. |
| 25 | Dismantling post or struts (wood,steel,or R.C.C) any section,incl.taking out embedded portion and making good distrubed ground complete all as specified and directed. |
| 26 | S&F mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 27 | Demolition of cement concrete un reinforced of any description & any position and disposing of the rubbish materials out of defense land complete all as specified and as directed. |
| 28 | M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 29 | Excavation in soft/loose soil for post holes (or similar holes) n.exc 0.5Cum getting out, removing surplus soil to a distance nexc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 30 | Dismantling fencing wire mesh, any type chain link fencing/welded mesh complete all as specified and directed. |
| 31 | Supply only Chain link MS galvanised fencing, size 4\\" x 4\\" and dia of wire 3.80mm complete all as specified and directed. |
| 32 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire,tightening complete all as specified and directed. |
| 33 | S & F mild steel screw bolts (machine made) 11mm to 15 mm dia with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long complete all as specified and directed. |
| 34 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerb stone not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not oterwise provided complete all as specified and directed. |
| 36 | S&F framed work such as grill, grating , etc, with end of bars shouldered and/or riveted, or forget in to spikes, framed guard bars, flat iron, angel, barred iron doors, ladder, framed balusters, walk ways, railings, framework of water tanks and and similar work GDE Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 37 | Fixing only framed work such as grills,gratings,etc ladders; framed balusters; walk ways; railings; framework of water tanks and similar works con-forming to Fe280.Gde-E-165 complete all as specified and directed. |
| 38 | S&F for mild steel work in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 39 | M&L for running welding of thickness n'exc 6mm in repairs complete all as specified and directed. |
| 40 | M&L for welding of thickness n'exc 6mm and length exc 2.5cm and n'exc 5cm in repairs complete all as specified and directed. |
| 41 | S&F in repairs galvanised 2 standred,steel barbed wire 2.24mm dia barbed with 2mm dia baebs at 75mm spacing and straning and fixing to any type of standred rails straining bolt, incl. securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 42 | M&L for restraining, resecuring including making good staples etc of galvanised 2 standred, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standred rails straining bolt,incl.securing or tying at crossing with and provition of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 43 | M&L for preparation of untreated new surfaces of steel and iron work exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed. |
| 44 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 45 | S & F in repair galvanised concertina coil fencing with punched tape concertina coil 600 mm dia having 50 Nos round per 6m length,spring core wire (2.5mm thick) and fixing the same with GI staple and GI clips to retains horizontal including bolts,spikes complete all as specified and directed. Note- Measurement will be taken as effective length of fencing and not length of coil. |
| 46 | M&L for preparation of old painted steel surfaces (Chain link fence) of any description, over 10 cm in width or girth not otherwise described and applying one coats of aluminum paint complete all as specified and directed. |
| 47 | M&L for preparation of pathway/flooring surface (interlocking/chequrred tiles surface) of any description or any position with mechanical dus remover and all loose particles, repair minor cracks, efflorsence, algae, minor cement spots or any other material by wire brush and chemical remover and apply one coat of floor paint of superior quality complete all as specified and directed. |
| 48 | M&L for complete removal of existing treatment of walls and applying two coat of cement base paint, including cracks filling with exterior wall care putty where ever necessary and complete all as specified and directed. |
| 49 | M&L for complete removal of existing treatment and apply two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces Complete all as specified and dirceted. |
| 50 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender