Tender For Repair And Day To Day Maintenance Works To Floor, Wall, Roof, Sanitary Fittings Joineris, Leakage, Seepage, Roof Sheet Sunken Slabs And Certain Other Items In C & F Area At Naval Base Kochi Under Ge (Nw) Kochi
Tender Value
44.70 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
18 days left
EMD
89400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Day To Day Maintenance Works To Floor, Wall, Roof, Sanitary Fittings Joineris, Leakage, Seepage, Roof Sheet Sunken Slabs And Certain Other Items In C & F Area At Naval Base Kochi Under Ge (Nw) Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of premises complete all as specifeid and directed. |
| 2 | M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed in CM 1:4 complete all as specifeid and directed. |
| 3 | M&L for coloured ceramic tiles coloured light shade 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed in CM 1:4 complete all as specifeid and directed. |
| 4 | M&L for glazed ceramic tiles coloured, as in vertical surfaces, size 350x 250x 7mm/450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 5 | M&L for vitrified ceramic tiles light shade, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm each , laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match, including 15 mm thick Screed bed or bedding layer in CM (1: 4 ) complete all as specifeid and directed. |
| 6 | M&L for vitrified ceramic tiles light shade, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm, laid on vertical surfaces/ skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match vertical surfaces with backing coat of 10mm thick in CM (1:4) complete all as specifeid and directed. |
| 7 | M&L for pre polished machine cut kota stone slab flooring 20-25mm thick over 20 mm thick Screed bed or bedding layer in CM 1: 4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specifeid and directed. |
| 8 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with mixture of pigment to match the shade of granite stone including grinding and polishing complete over 20mm thick cement screed in CM 1:4 complete all as specifeid and directed. |
| 9 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specifeid and directed. |
| 10 | M&L for 40mm thick PCC type B 0 1:2:4 (using 12.5mm graded crushed stone aggregate ) as in repair top surface of pavement and flooring etc. and surface finished even and smooth without using extra cement complete all as specifeid and directed. |
| 11 | Demolition of plain cement concrete in ground floors and pavings not exc 15 cm thickness (below or above gound level) complete all as specifeid and directed. |
| 12 | M&L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base complete all as specifeid and directed. |
| 13 | M&L for hard core of gauge exc. 63mm but n. exc 150mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specifeid and directed. |
| 14 | M&L for plain cement concrete type C1, 1:3:6 (using 20mm graded crushed stone aggregate) 75 mm thick as in path/plinth protection and finished the surface even and fair without using extra cement complete all as specified and directed. |
| 15 | Dismanting wall /ceiling board (fibre pulp insulation) or insulation boards any thickness including cover filters complete all as specifeid and directed. |
| 16 | M&L for anodised aluminium snap grid frame work of size 605x605mm for false ceiling complete all as specifeid and directed. |
| 17 | M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specifeid and directed. |
| 18 | M&L for 4mm thick non asbestos fibre cement building boards fixed to aluminium frame work complete all as specifeid and directed. |
| 19 | S&F in repair 4mm thick PVC false ceiling in any type of frame work complete all as specifeid and directed. |
| 20 | S&F in repair 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed. |
| 21 | Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed. |
| 22 | M&L for second class hard wood scantling, clean sawn, 40 Sqcm and over in section, in framed work complete all as specified and directed. |
| 23 | Dismantling timber framed work scantlings under 40 Sqcm in section, in fillets, rails, posts, rafters, purlins etc. complete all as specified and directed. |
| 24 | M&L for second class hard wood plain fillets square ,rectangular any section clean sawn, secured with nails or brads, sectional area exc 6 Sqcm and n exc 13 Sqcm complete all as specified and directed. |
| 25 | M&L for second class hard wood plain fillets square ,rectangular any section clean sawn, secured with nails or brads, sectional area exc 13 sq cm and n exe 25 sq cm, complete all as specified and directed. |
| 26 | M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and directed. |
| 27 | Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and as directed. |
| 28 | Dismantling tile battens of any size including tiling fillets spaced exc 15 cm centre to centre complete all as specified and directed. |
| 29 | S&F second class hard wood clean swan battens for tiles fixed at 30 cm centre to centre, sectional area exc 5 sqcm and nexc 15 sqcm complete all as specified and directed. |
| 30 | All as per Item No. 29 here-in-before but fixing only battens (battens shall be used obtained from dismantlings) complete all as specified and as directed. |
| 31 | M&L for preparing surface of tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with creosote complete all as specified and as directed. |
| 32 | M&L for roof tiles, mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed. |
| 33 | All as per item No 32 above but except tiles( tiles obtained from dismantlings shall be used) complete all as specified and as directed. |
| 34 | M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry on RCC slope roof and chajja fixed with cement mortar (1:4) including dismantling of old tiles complete all as specified and as directed. |
| 35 | M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed. |
| 36 | All as per item No 35 above but except tiles( tiles obtained from dismantlings shall be used) complete all as specified and as directed. |
| 37 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 38 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (jointing shall be done with solvent cement) complete all as specifeid and as directed. |
| 39 | S&F PVC (SWR) bends, any radius, 110mm bore all as specified complete all as specifeid and directed. |
| 40 | S&F PVC eaves gutter 180mm dia, semi circular with all necessary fittings, joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height (height up to 12 mtr) complete all as specified and directed. |
| 41 | Taking down the existing water proofing treatment from the roof including cement mortor, removing debris off the premises and cleaning the roof complete all as specified and directed. |
| 42 | M&L for 10 mm thick rendering in CM 1:3 mixed with 3% of WPC over neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed. (Note: WPC shall be measured and paid separately) |
| 43 | M&L for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm, reinforced with non-woven polyster matt not less than 160 g/sqm, having softening point not less than 1400 C longitidunal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2Kg/Sqm finishing the surface with solar reflective bitmininous aluminium paint @ 100 g/sqm, complete all as specified and as directed by Engneering-in-Charge and as per manufacturer's instructions. |
| 44 | Providing and fixing factory made uPVC white colour sliding window three track, area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drillingof holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steelFrame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed tothe wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mmnominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 45 | All as per item 44 here-in-before but area exceeding 2.00 Sqm each complete all as specified and directed. |
| 46 | M&L for toughened TINTED glass 5.0 mm thick of selected quality, fixing to the frame any type complete all as specified and directed. |
| 47 | S&F 180mm bore PVC (SWR) rain water pipes , with all necessary fittings (except bend), joining compounds, clamps, nut, bolts or screws etc and fixing in position, at any height complete all as specified and directed. |
| 48 | S&F 180mm bore PVC (SWR) bends, any radius, fixed with rubber ring joint (height upto 12 mtr) complete all as specified and directed. |
| 49 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete all as specified and as directed. |
| 50 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws (upto 15m height) complete all as specified and as directed. |
| 51 | S&F pre-painted plain sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding, fixed with screws all as specified and directed. |
| 52 | M&L for 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts in roof and walls complete all as specified and as directed. |
| 53 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 54 | S&F roof trusses (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 55 | M&L for mild steel rolled sections confirming to Fe 410 -W (Gde-E- 250) quality- A as in main and cross beams, hip and jack rafters; and purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 56 | M&L for mild steel rolled sections confirming to Fe 410 -W (Gde-E- 250) quality- A framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheet in or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel door fitting and also fastening complete all as specified and directed. |
| 57 | M&L for cleaning of rolling shutter and applying greasing on steel surfaces in side channels for smooth functining of all steel members complete all as specified and directed. |
| 58 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not oterwise described and applying two coats of epoxy coated paint over one coat of epoxy primer (height upto 15 mtr) complete all as specified and directed. |
| 59 | S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 60 | M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 61 | M&L for preparation of old painted steel and iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 62 | M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 63 | RemovaL of vegitation/ shurb growth over walls,roof chajja,gutter up to four storey building cleaning the surface and spraying acid of required concentration and quantity making good holes with cement mortar(1:3) or cement concretew 1:3:6 type C1 each hole not exceeding 0.10 sqm area including necessary scafolding etc complete all as specified and directed. |
| 64 | M&L for preparation of old decorated surface of walls including cornices and applying one coat of exterior emulsion complete all as specified and directed. |
| 65 | M&L for preparation of old painted steel and iron surface of any description over 10cm width or girth and applying one coat of epoxy anticorrossive paint over a coat of primer for truss work (approximate 15 Mtr height complete all as specified and directed. |
| 66 | Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm complete all as specified and directed. |
| 67 | Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm and but n exc 4 Sqm complete all as specified and directed. |
| 68 | Taking down shutters of any description area not exceeding 1 Sqm each complete all as specified and directed. |
| 69 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed. |
| 70 | Taking down shutter of any description not exceeding 1.00 Sqm including re-securing or easing and adjusting and refixing in same opening complete all as specified and directed. |
| 71 | Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm including re-securing or easing and adjusting and refixing in same opening complete all as specified and directed. |
| 72 | S&F 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 73 | S&F 2nd class hard wood 30mm thick glazed, gauged and skeleton shutters, open rebated and prepared to receive glass,gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(a) complete all as specified and directed. |
| 74 | All as per item No 72 here-in-before but divided into square with sash bars, any numbers complete all as specified and directed. |
| 75 | S&F 2nd class hard wood 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass, guaze etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass,gauze etc size of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a) complete all as specified and directed. |
| 76 | S&F 2nd class hard wood 35mm thick panelled shutter plain, framed, panelled (any member of panels) with panel of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 77 | S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 78 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading & jointed together with solvent cement all as specified and shown on drawing. |
| 79 | S&F aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and directed. |
| 80 | S&F in repair aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and directed. |
| 81 | S&F aluminium anodised barrel tower bolt extruded section of 150mm long complete all as specified and directed. |
| 82 | S&F in repair aluminium anodised barrel tower bolt extruded section of 150mm long complete all as specified and directed. |
| 83 | S&F aluminium anodised barrel tower bolt extruded section of 100 mm long complete all as specified and directed. |
| 84 | S&F in repair aluminium anodised barrel tower bolt extruded section of 100 mm long complete all as specified and directed. |
| 85 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 86 | S&F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 87 | S&F stainless steel butt hinges medium weight for 100mm size complete all as specified and directed. |
| 88 | S&F extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed. |
| 89 | S&F in repair extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed. |
| 90 | S&F extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and directed. |
| 91 | S&F in repair extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and directed. |
| 92 | S&F aluminium plate type II gate and shutter hooks and eyes of 200mm size complete all as specified and directed. |
| 93 | S&F in repair tubular towel rail 20mm dia brass chromium plated with brackets 60cm long complete all as specified and directed. |
| 94 | S&F in repair stainless steel curtain rail bright finished 25mm dia decorative type complete all as specified and directed. |
| 95 | S&F in repair stainless steel bright finished decorative brackets/finials for curtain rail 25mm dia complete all as specified and directed. |
| 96 | S&F in repair door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in repair in floor, 140mm over length of cover plates complete all as specified and directed. |
| 97 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 98 | S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 99 | S&F in repair sheet glass ordinary quality 3.00 mm thick and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 100 | S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed. |
| 101 | S&Fin repairs vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and directed. |
| 102 | S&F in repair plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or alumininsed hinging device complete all as specified and directed. |
| 103 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete all as specified and directed. |
| 104 | S&F in repair Vitreous China Urinal, Half stall type, white all as specified excluding flushing pipe and waste pipe complete all as specified and directed. |
| 105 | S&F in repair vitreous china urinal partition white of size 310x700 mm complete all as specified and directed. |
| 106 | S&F in repairs vitreous china wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and directed. |
| 107 | S&F 15 mm bore fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 108 | S&F in repair SS soap dish complete all as specified and directed.Make : Parryware Cart part No.T6902A1 or equivalent make of Cera/Hindware |
| 109 | S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 grams) complete all as specified and directed. |
| 110 | S&F in repair mirror of selected quality glass 600mmx450mm beveled edge, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 111 | S&F in repair PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms complete all as specified and directed. |
| 112 | S&F in repair waste coupling of PTMT 32mm bore dia (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed. |
| 113 | M&L for 2 mm thick high performance modified self-adhesive membrane SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy-to-peel silicon film on the other side on roof including cleaning and preparation of surface complete all as specified and directed. |
| 114 | Taking down cement plaster on brick/concrete wall and ceiling surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 115 | M&L for cement plaster in two coat 8 mm thick in CM 1:4 using WPC over 12mm thick in CM 1:6 on external surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid seperately) |
| 116 | M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and directed. |
| 117 | M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 118 | M&L for preperation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coat of cement base paint over a coat of priming complete all as specified and directed. |
| 119 | M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 120 | M&L preparation of new plastered surfaces of wall (plastered or unplastered) including cornices and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed. |
| 121 | M&L for applying 1.5mm thick wall care putty on old and new plaster surface of wall complete all as specified and directed. |
| 122 | Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after reparing and make functional including replacement of fitting and fixture for proper functioning as required all as specified and as directed. |
| 123 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 124 | S&F in repair dorset mortise dead lock 75mm length two lever,brass body suitable for Aluminium door complete all as specified and directed. |
| 125 | S&F in repairs aluminum mortice lock vertical type 75 mm 4 levers complete all as specified and directed. |
| 126 | S&F powder coated aluminium anodised frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc.(minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 127 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos) and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 128 | S&F anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) tower bolt 100mm (02 Nos) and Powder Coated (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 129 | S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) sliding window and ventilator frame without sash bar including all necessary jointing cleat , hold fasts , rubber gasket, anodised snap beading, anodised aluminium fitting such as aluminium fitting such as 'F' channel if required for wire mesh or aluminium grill, aluminium handle, locking arrangement etc based on HINDALCO catalog No.1. 4095 - 61.98x29.70x1.60 mm = 2 Track 2.9777 - 39.00x20.00x1.60 mm = Shutter Vertical3. 3994 - 41.00x20.00x1.20 mm = Shutter top & Bottom.4. 9778 - 39.00x20.00x1.50xmm = Shutter Vertical Inter Lockcomplete all as directed by the Engineer- in Charge. |
| 130 | S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beadings crews etc.complete all as specified and directed. |
| 131 | S&F in repair aluminium powder coated frame work for partition (area of panel not exceeding 1.50 sqm each) with out sash bar including all necessary jointing cleats, hold fasts, hinges with fixing clips,rubber gasket,anodised snap beading,anodised aluminium fittings,locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for partition is catlogue No 9223 of size 63.58x38.10x2.00 mm (single partition vertical &horizontal sections) of Hindalco or equivalent make as approved by GE complete all as specified and directed. |
| 132 | S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 133 | S&F 3mm thick sheet glass ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and directed. |
| 134 | S&F 4.00mm thick frosted glass pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 135 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 136 | S&F anodised aluminium grill powder coated of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. |
| 137 | Demolition of reinforced cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 138 | Material and labour for providing pre-cast cement concrete 1: 2 : 4 type B1 using 20mm stone aggregate as in cover slab, shelves, cooking slab and similar articles and set in CM 1: 6 including necessary formwork complete all as specified and as directed. |
| 139 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 140 | M&L for TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 141 | S&F in repair steel rolling shutters, (lath thickness 1.25mm) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 142 | S&F in repair 6mm thick PVC heavy grade hollow profile designer panel of approved quality and design in wall panelling for including all beadings and batans, machiching aluminium angles at wall/ window cornners complete all as specified and directed. |
| 143 | Surface Preparation: Clean the surface using grinders/scarifies is recommended to prepare the surface and ensure that the surface is free from dust prior to appliction of primer.Cracks & construciton Joint treatment: Cracks should be cut open with hand griding machine and apply ShaliPrime 2E as a primer and fill the grooved area with ShaliFloor SLUL 3ES.Priming: Apply ShaliPrime 2E as a primer coat with the help of brush/roller @ 200 gms/Sqm, and allow it to dry for 12 hrs.Epoxy screed (self leveling Undr Lay) : Apply ShaliFloor SL UL 3ES with notched trowel over the primed surface to achive the desired thickness @ 3.7 Kgs for 2mm thickness and allow it to dry for 24 hrs.Top Coat : AppShaliFloor SL 3 EPU with Trowel over the Epoxy Screed with 1 mm self leveling pigmented @ 1.6 kg per sqm of STP make or equivalent as approved, completely as per company specification of approved colour complete all as specified and directed by Engineer-in-charge.Note : The unit rate quoted is deemed to be inclusive of material required tools and plant. |
| 144 | Demolition of brick work or stone, boulder, precast PCC block masonry including all quoins, arches, pillar, etc. built in cement mortar or cement lime mortar complete all as specified and directed. |
| 145 | M&L for pre-cast cement concrete block masonry with solid blocks, Type C1, 1:3:6 (using 20mm graded stone aggregate) exc. 10 cm in width and setting in mortar 1:6, complete complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender