Tender For Internal And External Painting Works In 11 Elevated Stations (Koyambedu, Cmbt, Arumbakkam, Vadapalani, Ashok Nagar, St. Thomas Mount, Airport, Meenambakkam, Nanganallur Road, Guindy, Little Mount) Of Phase-01 Elevated Corridor
Tender Value
6.41 Crore
Estimated cost
Bid Submission
27 Aug 2026
4 days left
EMD
6.41 Lakhs
Bank guarantee accepted
Document Fee
24000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal And External Painting Works In 11 Elevated Stations (Koyambedu, Cmbt, Arumbakkam, Vadapalani, Ashok Nagar, St. Thomas Mount, Airport, Meenambakkam, Nanganallur Road, Guindy, Little Mount) Of Phase-01 Elevated Corridor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Aug-2026 | Reply to Bidders Query | Other | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | General Items |
| 2 | Screed Concrete for Slope Correction in Sunshades.Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarseaggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering. And finishing should be as per direction of the engineer-in-charge; for the following grades of concrete.Note: In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth and upto floor V leve:- l Concrete of M20 grade with minimum cement content of 270 kg /cum |
| 3 | For Closing of Unwanted Openings in Cable Tray Entries, Fresh Air Grill, Exhaust Fans Etc.Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Cement Plastering in Fine Sand of 12 mm Thick with 1:4 ( 1 Cement and 4 Coarse Sand), height upto 10m fromground level. |
| 5 | For OutSide Openings to prevent entry of Rainwater Inside Station Premise.18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand):Moulded Band |
| 6 | Dismantling old plaster or skirting raking out joits and cleaning the surface for plaster including disposal of rubbish to the dumping ground. |
| 7 | Repairs to the plaster of thickness 12mm to 20mm in patch of area 2.5 sq mt and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50mtr lead. With cement mortar 1:4 (1 cement 4 fine sand). For Crack Repair Contractor need to fix Chicken mesh Before taking up Plastering repair and making of Groove . |
| 8 | Applying one coat of water thinnable primer of approved brand and manufacture on wall surface |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.- for Repair of walls where wall putty is completely removed. |
| 10 | Painting with silicon & acrylic emulsion based water thinnable sealer with one coat of approved brand and manufacture on wet or patchy portion of plastered surfaces |
| 11 | Wall painting with Premium Quality Acrylic emulsion paint of approved brand and manufacture to give an even shade : One or more coats on old work. ( Rate Should be inclusive of Surface Preparation/Path wall putty) - Internal walls |
| 12 | Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing paint surface applied @ 3.28 ltr/10 sqm.over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. - Station Exterior. Spalling and Missing texture of minor areas should be finished during the time of Painting |
| 13 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing paint surface/water proof surface - Station, Depot Exterior |
| 14 | Finishing walls/Open Terrace with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. - for Terrace Painting |
| 15 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works - for rusted Portion on Steel Work |
| 16 | Painting with Premium Quality synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work ( Rate Should be inclusive of surface preparation,Patch work with metal paste for Rusted Surface and putty for Wooden Doors to give Smooth Finish) - Contractor has to quote the Rate according for the scope of works includes - Doors, Rolling Shutters, Signage Board Suspendor/Cantiliver, Cable tray Supports,Rain Water Gutters,Down Take Pipes, DG yard Fencings, Station D.wall Grills, Gates,Bollards,Fire Fighting line, Fire Hydrant units Etc,. |
| 17 | Painting with Premium Quality synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work ( Rate Should be inclusive of surface preparation,Patch work with metal paste for Rusted Surface) - Contractor has to quote the Rate according for the Scope of Work is Painting of Roof Structure of type Space Tress/PEB |
| 18 | Painting with aluminium paint of approved brand and manufacture to give an even shade One or more coats on old work |
| 19 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete for both Acrylic emulsion and Enamel Painting Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender