Tender For maintenance of Water Supply (Two Years Annual Repairing Of V. T. Motor, Starter, Panel, Tpmo, Transformer Etc. Of Network-14 To 16 And 14A To 16A) Noida
Tender Value
43.20 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
12 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
2832
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Water Supply (Two Years Annual Repairing Of V. T. Motor, Starter, Panel, Tpmo, Transformer Etc. Of Network-14 To 16 And 14A To 16A) Noida
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding of 40 HP VT motor & Booster Motor (centrifugal motor) Kirloskar/equivalent make as per original winding 1440 RPM 415 volt with super enamelled copper wire as required gauge complete in all respect as per direction of E/I. It is also include the dismentling/refixing/cartage from site to workshop/factory and vice versa. The old material will be the property of contractor. (NSI-5.1.01) |
| 2 | S/F Thrust bearing SKF make No.-7220 (AOR) |
| 3 | S/F Ball bearing SKF make No.-6311 (AOR) |
| 4 | S/f of V.T. Motor Coupling & key size 25 mm bore as per existing size of shaft. (NSI-12.4.06) |
| 5 | S/f of Rachit Plate with Goli as per requirment of VT Motor at site as per direction of E/I. (NSI-12.04.09) |
| 6 | S/F of 11 KV TPMO Relco/Rama make 9 nos. insulator of Jai shree/BHEL make complete in all respects as per direction of E/I. (UPERC-18, S.No.-13, P-48)GST exempted |
| 7 | S/F of out door type 11 KV fuse set Ralco/Rama make with insulator Jai shree/BHEL make complete in all respects as per direction of E/I. (AOR)GST exempted |
| 8 | S/F overhead line with ACSR conductor RABBIT/RECON category one poles/service bracket i/c binding etc. complete in all respects. (PS No.-627) |
| 9 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. (DSR-18, I.No.-13.11, P-45)GST exempted |
| 10 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. (DSR-18, I.No.-13.10, P-45)GST exempted |
| 11 | S/F Fress Transformer Oil as per latest specifications of Savita Make (AOR) |
| 12 | S/L of Al. conductor PVC insulated armoured served, sheathed cable 1100 V grade at a depth of below ground level over a cushion of 75mm below ground level over a cushion of 75mm thick sand alround protected with burnt brick on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS No.-501) |
| 13 | 16 Sqmm 2 core |
| 14 | 35 Sqmm 3½ core |
| 15 | 50 Sqmm 3½ core |
| 16 | 70 Sqmm 3½ core |
| 17 | 400 Sqmm 3½ core |
| 18 | S/L of 3 core standered aluminium conductor XLPE (cross linked polythene) insulated PVC bedded, Galvanised flat steel strip aroured cable confirming to IS : 7098 (Part-II with latest amendmrnts) 11 KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand alround and protected with well burnt bricks on sides and on top put across. The armourning of cable shall be properly connected with earth conductor by clamps etc. (PS No.-506) |
| 19 | 70 Sqmm 3 core |
| 20 | 120 Sqmm 3 core |
| 21 | S/F Flat Cable Finolex make…...25 Sqmm x 3 Core (AOR) |
| 22 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I. (PS. No.-504) |
| 23 | 16 Sqmm |
| 24 | 25 Sqmm |
| 25 | 35 Sqmm |
| 26 | 50 Sqmm |
| 27 | 70 Sqmm |
| 28 | 240 Sqmm |
| 29 | 400 Sqmm |
| 30 | S/F of 200 Amp. 415 V metal clad TPN CFS complete with HRC fuse set etc. on angle iron frame complete in all respects Cat 'B'. (PS No.-354) |
| 31 | S/F of 400 Amp. 415 V metal clad TPN CFS complete with HRC fuse set etc. on angle iron frame complete in all respects Cat 'B'. (PS No.-356) |
| 32 | S/F of Sintex type Junction Box model No.-IIGSJB 2817 of size 240x130x110 mm with hinges & locking arrangment & M. S. Clamp of 50x6 mm flat, complete in all respect and chuck nut for cable connection etc. as per direction of E/I. (AOR)GST exempted |
| 33 | Painting of the electric pole & channal with 2 coats of Aluminium paint over red oxide primer complete in all respects. (PS No.-634) |
| 34 | Supply and laying of 1800 mmx900 mmx12 mm thick chequered rubber matting of tested quality. (PS No.-1136) |
| 35 | Rewinding & Repairing of Transformer Kirlosker or equivalent make as per original winding 11/0.433 K.Volt with supper enamelled copper wire as required gauge complete in all respect as per direction of E/I. It is also include the dismentling/refixing/cartage from site to work shop/factory and vice versa. The old material will be the property of the contractor (Old material rate already deducted in AOR) (AOR) |
| 36 | 63 KVA (AOR) |
| 37 | 250 KVA (AOR) |
| 38 | 400 KVA (AOR) |
| 39 | Dismentling & re-erection of transformer upto 400 KVA with the help of crane machine i/c cartage from site to workshop and after repairing from workshop to site with instalation and testing complete in all respect. (AOR) |
| 40 | Repairing of Fully Automatic Starter 50 HP as per following:- |
| 41 | S/F of MNX 110 Amp. Contactor L&T Make (AOR) |
| 42 | S/F of 125 Amp. MCCB (Make-L&T D Shine Micro processor) (AOR) |
| 43 | S/F of Timer L&T Make (AOR) |
| 44 | S/F of VPD Make Soft Hard (AOR) |
| 45 | S/F of MPD Make Soft Hard (AOR) |
| 46 | WLC/Seal Monitor, Make-Pump Care/Kishor (AOR) |
| 47 | S/F of Control Transformer Make Electra Care/Pioneer (AOR) |
| 48 | S/F Winding Temp. Relay Minilec Make (AOR) |
| 49 | Auto Transformer suitable for 50 HP induction motor (AOR) |
| 50 | Repairing of Main L. T. Pannel 400 Amp as per following:- |
| 51 | S/F of 400 Amp. MCCB (Make-L&T D Shine Micro processor) (AOR) |
| 52 | S/F of 100 Amp. MCCB (Make-L&T D Shine Micro processor) (AOR) |
| 53 | S/F of Amper Meter (A.E. Make) (AOR) |
| 54 | S/F of Volt Meter (A.E. Make) (AOR) |
| 55 | S/F of CT 150/5 (A.E. Make) (AOR) |
| 56 | S/F of CT 400/5 (A.E. Make) (AOR) |
| 57 | S/F of ASS Make-Sazler (AOR) |
| 58 | S/F of VSS Make-Sazler (AOR) |
| 59 | S/F of 63 Amp 3 Pole MCCB TM Type 36 KA (Make-L&T C Power/D-Sine/Siemens (3WL/VL)/Schnieder (Masterpact/NSX) (NSI-12.2.08) |
| 60 | S/F of Indicatin Light (Blue & White) (Make-Esbee/Siemens/Schnieder) (NSI-12.3.04) |
| 61 | S/F of Push Button (Make-Esbee/Siemens/Schnieder) (NSI-12.3.07) |
| 62 | S/F of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP 66 Protection Complete in all respect. Cat-AA (PS No.-1422) |
| 63 | S/F of Recess/Surface/Pendent mounting round 24 to 32 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. Cat-AA (PS No.-1404) |
| 64 | S/F of steel tubular pole 11.0 Mtrs. Designated 410-SP-56 in 1:3:6 cement concrete graded stone aggregate of 40 mm n.s. & foundation i/c excavation, back filling complete in all respects as per direction of E/I at site. (UPREC-18, S. No.-13, P-30)GST exempted |
| 65 | Supply & fixing steel tubular pole 7.50 Metre long designated 410 SP-4 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. (PS No.-605) |
| 66 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.0 m & upto 12.0 mtr. (DSR-18, I.No.-11.3.4, P-39)GST exempted |
| 67 | Supplying of Channel Iron 75 mm x 40 mm x 6 mm (7.14 Kg/mtr.) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc i/c drilling of holes for insulator pins etc (as per drawing) and painting with primer and inished paint as required. (DSR-2018, I.No.-12.11/P-41)GST exempted |
| 68 | S/F of earth elctrode for lighting conductor of 600mm x 600mm x 6mm GI plate vertically with its top at least 3.0m below ground level complete with 20mm GI pipe for watering funnel, 30 cm square C.I. Box with cover masonary housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per direction of E/I. (PS No.-706) |
| 69 | S/L of 25mm x 3mm GI strip from each electrode directly in the ground complete in all respect. (PS No.-716) |
| 70 | Rewinding of Submercible Motor as per original binding (old scrap not return) 20/25 HP 2 Stage Submercible Motor (AOR) |
| 71 | S/F Suction Case Bearing Bush (AOR) |
| 72 | S/F Mechanical Seal (AOR) |
| 73 | S/F Sleaves Seal SS (AOR) |
| 74 | S/F Neck Ring (AOR) |
| 75 | S/F Rubber Ring (AOR) |
| 76 | S/F Bearing Bush for Upper/Lower Bronze (AOR) |
| 77 | S/F Rubber 'O' Ring (AOR) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender