Tender For General-Thenmala-Ms2-Kip-Rbmc-Fabrication, Painting And Erection Of New Shutters- 2Nos Of Size 2300Mm (H) X 2400Mm (W)- And New Hoisting Mechanism, Patchwork Of Existing Hoisting Platform At Ezhamkulam Flush Escape Ch:44601M Of Rbc-General
Tender Value
10.32 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
10 days left
EMD
25818
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanamthitta → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Thenmala-Ms2-Kip-Rbmc-Fabrication, Painting And Erection Of New Shutters- 2Nos Of Size 2300Mm (H) X 2400Mm (W)- And New Hoisting Mechanism, Patchwork Of Existing Hoisting Platform At Ezhamkulam Flush Escape Ch:44601M Of Rbc-General Mechanical Work
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old damaged shutters, embedded parts and its hoisting mechanism- Supply Fabrication erection of new embedded parts and allied civil work etc. |
| 2 | OD10632/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ), Hoisting unit, Embedded parts of the sameand stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by thedepartmental officer at the site.(weight of the unserviceable shutters and embedded parts may be calculatedas 60% ) |
| 3 | OD18266/2026-2027:Providing temporary platform for demolishing existing civil structure, concreting and plastering including cost of all materials, labours etc. complete TEMPORARY PLATFORM [40 times usage as life period (assumed) for these materials, hence cost for 1 time used] |
| 4 | 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 6 | OD860/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 7 | OD861/2023-2024: Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 8 | OD862/2023-2024:Supply of MS round bar including cost of conveyance charges |
| 9 | OD10633/2022-2023:Fabrication and errection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories asper approved specifications, drawings and directions of deptl fficer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of materialalready supplied |
| 10 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 11 | 5.8:Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:11/2:3 (1 cement : 11/2 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | Supply, Fabrication, Erection, painting of shutters and fixing of water seal, roller wheel etc. and patch work at hoisting unit |
| 13 | OD863/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 14 | OD864/2023-2024: Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 15 | 85.103:Supply of MS checquered plates including cost of conveyance charges |
| 16 | OD10643/2022-2023:Fabrication of Structural steel canal shutters ( Up to 2 tonne weight )/ Hoisting bridge/ Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied |
| 17 | OD10871/2022-2023:Supplying and fixing specified cast steel thrust roller assembly having 150mm OD,65mm ID, 60mm tread width, SS shaft 55mm OD, 170mm L and accessories including cost of all materials,machineries, labour , all lift and lead, incidental and conveyance charges etc complete. |
| 18 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 19 | OD10647/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labour and machinery and incidental and conveyance chargers complete as per approved specification or drawing. |
| 20 | OD10648/2022-2023:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of MS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings |
| 21 | Painting of existing hoisting platform, supply and fixing of new hoisting mechanism and erection of fabricated shutter and hoisting unit conducting trial run etc. |
| 22 | OD10652/2022-2023:Supply of G.I. pipes 40 mm dia |
| 23 | OD10658/2022-2023:Providing EN-8 screw rod 7.50 tonne capacity 4.00M lift screw hoist having onenumber of EN-8 screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operationincluding cost of all materials, labour, hire charges and conveyance. |
| 24 | OD10659/2022-2023:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for 24rpm of hand operation including cost of all materials, labour, hire charges and conveyance. |
| 25 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 26 | OD10655/2022-2023:supply the M.S bolt and nut |
| 27 | OD13226/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight )/ Hoisting Bridge / Platform including hand rails, ladder etc including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied |
| 28 | OD10656/2022-2023:Trial run the gate with its hoisting mechanism etc. including cost of all materials,machinery , labour, all lift and lead, incidental and conveyance charges etc. as per instruction ofdepartmental officers in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender