Tender For General-Kip(Lb)-Fabrication, Painting And Erection Of Shutter At Nallila Distributary Offtake And Repairs To Hoisting Mechanism And Painting Of Shutter At Nallila Cross Regulator Ch:5300M Of Pallimon Distributary-General Mechanical Work
Tender Value
3.38 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
10 days left
EMD
8464
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Kip(Lb)-Fabrication, Painting And Erection Of Shutter At Nallila Distributary Offtake And Repairs To Hoisting Mechanism And Painting Of Shutter At Nallila Cross Regulator Ch:5300M Of Pallimon Distributary-General Mechanical Work
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of work site, dismantling the old damaged mechanical structures, demolishing the existing civil structure and providing concrete for fixing new embedded parts etc. |
| 2 | OD24589/2022-2023:Clearing grass from banks of canal and removal of silt, zoological waste and other debris from canal bed including removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 3 | OD24590/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embedded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by the departmental officer at the site. (weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80 % ) |
| 4 | OD18716/2026-2027:Providing Temporary Platform for dismantling,demolishing, and fixing of embeded parts |
| 5 | 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 6 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 7 | 5.8:Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:11/2:3 (1 cement : 11/2 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 9 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 10 | Supply,Fabrication & fixing of new embedded parts. |
| 11 | OD24580/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 12 | OD24581/2022-2023:Supply of MS round bar including cost of conveyance charges |
| 13 | OD24582/2022-2023:Fabrication and erection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied |
| 14 | Supply,Fabrication and Painting of shutters and hoisting structure |
| 15 | OD24576/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 16 | OD24577/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 17 | OD24578/2022-2023:Supply of M.S Bolt with nut and washer |
| 18 | OD24579/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight )/Hoisting Bridge /Platfurm and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied |
| 19 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 20 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 21 | Supply and fixing of new hoisting mechanism, screw rods, new rubber seals, etc. and erection of shutter, hoisting structure etc. and conducting trial run. |
| 22 | OD24583/2022-2023:Supplying and fixing in correct position with specified initial interface L-type/Bulbnose rubber seal confirming to IS 11855 to the canal shutters including cost of MS bolts and nuts ,all labour, machinery, incidental and conveyance chargers complete as per approved specification and drawing |
| 23 | OD24584/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labour and machinery and incidental and conveyance chargers complete as per approved specification and drawing. |
| 24 | OD24585/2022-2023:Providing EN 8 screw rod with one number of EN-8 screw shaft, hand operation including cost of all materials, labour, hire charges and conveyance |
| 25 | OD24592/2022-2023:Providing EN 8 screw rod 7.50 tonn capacity 4.00M lift screw hoist having one number of EN 8 screw shaft having a lifting speed of around 5cm/ min for 24 rpm of hand operation including cost of all materials, hire charges and conveyance (67mm dia) |
| 26 | OD24586/2022-2023:Providing base and nut arrangement for hoisting the shutter including cost of allmaterials labor etc complete |
| 27 | OD18715/2026-2027:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for handoperation including costof all materials, labour, hire charges and conveyance |
| 28 | OD24587/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , ladder etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied. |
| 29 | OD24588/2022-2023:Trail run the gates with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. As per instruction ofdepartmental officers in charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender