Tender For Supply Installation Testing and Commissioning of Elecator Lift And Minor Repair Works At Transport Commissioner Office Jammu (Under M.H-Capex 2026-27).
Tender Value
2.40 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
7 days left
EMD
4800
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Elecator Lift And Minor Repair Works At Transport Commissioner Office Jammu (Under M.H-Capex 2026-27).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. |
| 2 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm. |
| 3 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of tile 600x600 mm. |
| 4 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 800x800 mm. |
| 5 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 800x800 mm. |
| 6 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 7 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick. |
| 8 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 9 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 11 | Providing and fixing of Zebra blinds of approved colour made from 100% polyester yarn coated with fade resistant polymer to ensure complete opaquely with zero light transmittance having width of 280cm and weight of 148g/sqm +5% and fabric repeat size having solid 13.5cm +5% and mesh 9cm+5% conforming to relevant IS parameters (Hunter Douglas / Johnson / Hillarys / Vista / marvel) including all fixtures and fittings complete in all respect as per design and make approved by engineer in charge (Complete job). |
| 12 | Renewing glass panes, with wooden fillets wherever necessary. Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm). |
| 13 | Supplying and fixing new wooden fillets wherever necessary. 2nd class teak wood fillets. |
| 14 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete |
| 15 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper. |
| 16 | Providing and fixing necessary plumbing items like G.I union 20mm, MTA 20x20mm, FT 20mm x 20mm etc.as required at site. |
| 17 | Providing and fixing of C.P Nipple of required size all complete. |
| 18 | Providing and fixing un-plasticised - PVC pipe clips of approved design to un-plasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including all special fitting of composite material as directed by E.I.C. |
| 19 | 4\\" Fastners. |
| 20 | Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 21 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 22 | Providing and fixing (Health faucet) Bidet shower with 1.0 Mtr easy flex tube and hooks, polished chromed finished as per direction of Engineer-in-charge (Complete job). |
| 23 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings.Flat back wash basin of size 630x450 mm. |
| 24 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 25 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible pipe 32 mm dia. |
| 26 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
| 27 | Providing and fixing uplasticized PVC connection pipe with brass unions. 30 cm length. 20 mm nominal bore. |
| 28 | Providing and fixing uplasticized PVC connection pipe with brass unions. 45 cm length 20 mm nominal bore. |
| 29 | Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931). 15mm nominal bore (Make Jaquar CQT 23059 / Kerovit Make Cat No. KB 1511003). |
| 30 | Providing and fixing wash basin / kitchen mixer of approved brand like Hindware, Cera, Jaquar including all fitting (Complete job). |
| 31 | Providing and fixing 15mm dia C.P brass bib cock with wall flange (Short Body) with all accessories (Make :- Jaquar / Kerovit / Cera / Hindware) or equivalent make as approved by E.I. C (Complete job). |
| 32 | Providing and fixing 15mm dia C.P brass Long nose bib cock with all accessories and weighing not less than 810 gms (Make :- Jaquar / Kerovit / Cera / Hindware) or equivalent make as approved by E.I. C (Complete job). |
| 33 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm. |
| 34 | Providing and fixing toilet paper holder C.P. brass. |
| 35 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 36 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 37 | Providing and fixing PTMT grating of approved quality and colour. Rectangular type with open able circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 38 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20mm nominal outer dia pipes. |
| 40 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 250x10 mm. |
| 41 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm. |
| 42 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 100x10 mm. |
| 43 | Engaging Carpenter as per requirement at site. |
| 44 | Engaging Plumber as per requirement at site. |
| 45 | Engaging Helper as per requirement at site. |
| 46 | Engaging Labour as per requirement at site. |
| 47 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 48 | 4 Module (125mmX75mm) |
| 49 | 6 Module (200mmX75mm) |
| 50 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 51 | 15/16 amp switch |
| 52 | 3 pin 5/6 amp socket outlet |
| 53 | 6 pin 15/16 socket outlet |
| 54 | 20/22 Watt LED 4 feet tube lite fitting / fixtrure PVC housing with 2000 lumens and min lumens efficiency 100 lumens / watt P.F>.90. having 5000 hours. |
| 55 | 28 Watt LED 4 feet tube lite fitting / fixrture aluminum housing with 3600 lumens and min lumens efficiency 100 lumens / watt P.F>.90. |
| 56 | 36 Watt LED 4 feet tube lite fitting / fixrture aluminum housing with 3600 lumens and min lumens efficiency 100 lumens / watt P.F>.90. |
| 57 | Engaging tractor with trolley for disposal of mulba, unhygenic material away from site as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender