Tender For Upgradation Of Forest Rest House At Teetwal Kehmil Forest Division Kupwara
Tender Value
8 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
0 days left
EMD
16000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Forest Rest House At Teetwal Kehmil Forest Division Kupwara
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wooden floooring/boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead :Thickness above 25 mm upto 40 mm. |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles above 25 mm and upto 40 mm. |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 4 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 5 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 6 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix) |
| 7 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 8 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone Quarry |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more. Reinforcement @ for all rcc work |
| 12 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineerin-charge :35mm KD wood or equivalent. |
| 13 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 14 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 15 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : |
| 16 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 17 | CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltrs |
| 19 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 20 | WOODEN FLOORINGWooden planking, tongued and grooved in flooring including fixing with iron screws complete: 18 mm thick Second class teak wood |
| 21 | Providing and laying 6 mm thick closed-cell polyethylene (XPE/EPE) foam underlayment beneath wooden/laminated flooring, with moisture-resistant properties, sound and impact insulation, thermal insulation, butt-jointed with joints sealed using adhesive tape where required, including surface preparation, cutting, fitting, labour, tools, and all incidental works, complete as per the direction of the Engineer-in-Charge. |
| 22 | French spirit polishing, one or more coats on old work incl wood filler |
| 23 | Providing and fixing 35 mm thick Colour Coated Galvanized (CG) Sheet Panels with decorative wooden finish on the exposed face, factory-finished with wood grain texture, complete with GI framework/supports, self-drilling screws, flashings, trims, sealants, fixing accessories, cutting, fitting, labour, and all incidental works, complete as per approved design and the directions of the Engineer-in-Charge |
| 24 | Providing and fixing plywood made of commercial quality ISI marked plywood of 12 mm thick, conforming to IS:303, termite and borer resistant, boiling water-resistant (BWR grade), waterproof with smooth both-side finish. The plywood shall be cut, dressed, jointed, and fixed in proper alignment over the supporting framework as per approved design and directions of the Engineer-in-charge, complete in all respects |
| 25 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 26 | Providing, Fixing, Testing & Commissioning of 1.5 Ton, 5-Star Wi-Fi Enabled Inverter Hot & Cold Smart Split Air Conditioner with 100% copper condenser, 7-in-1 Convertible Cooling & Heating with True AI Mode, 4-way swing, PM0.1 air purification filter, auto convertible inverter compressor, R32 eco-friendly refrigerant, suitable for medium-sized rooms, complete with indoor & outdoor units, copper refrigerant piping, drain pipe, interconnecting cables, wall mounting brackets, outdoor unit stand, voltage stabilizer, MCB/isolator, all electrical accessories, testing & commissioning, complete. Warranty: 1 year comprehensive, 5 years on PCB, 10 years on compressor. Approved Makes: Daikin / LG / Panasonic / Carrier / Blue Star / Hitachi / Voltas / Mitsubishi Electric / O General. |
| 27 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 29 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Washbasin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 30 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 MM DIA |
| 32 | Providing and fixing jali for water closet or wash basin including P.V.C waste fittings complete: |
| 33 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe, |
| 34 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 35 | Providing and fixing pvc pipes class c pipe incl soil waste and vent pipes |
| 36 | Providing & Fixing PVC ( Prince Make) following fittings complete |
| 37 | Door Tee 100mm size |
| 38 | Door Tee 75mm size |
| 39 | PVC collar 100mm |
| 40 | PVC collar 75mm |
| 41 | PVC Reducer 100x75mm |
| 42 | Plain Bend 100 mm size |
| 43 | Plain Bend 75 mm size |
| 44 | Door bend 100mm |
| 45 | Door bend 75mm |
| 46 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 47 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 48 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 49 | Providing and fixing electrical components. All the installation should comprise of fixing the necessary conduits,wiring,switches,MCBs, panell board,lights,fans etc.Make : anchor, havells,goldmedal etc. Light points Bulbs Only |
| 50 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site @ 30KM |
| 51 | steel |
| 52 | cement |
| 53 | Aggregate |
| 54 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 50 mtr |
| 55 | steel |
| 56 | cement |
| 57 | Aggregate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender