Tender For Remaining Work Of Permanent Restoration Work On Various Damaged Roads Due To Rain Under Package-Rj-25-04/Pr/2024-25 Under Risk And Cost
Tender Value
24.76 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
7 days left
EMD
49528
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pali → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Remaining Work Of Permanent Restoration Work On Various Damaged Roads Due To Rain Under Package-Rj-25-04/Pr/2024-25 Under Risk And Cost
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Aug-2026 | date extend | Date | 14-Aug-2026 |
| 2 | 14-Aug-2026 | Date extended | Date | 21-Aug-2026 |
| 3 | 02-Sep-2026 | Date extend corrigendum1 | Date | 14-Sep-2026 |
| 4 | 14-Sep-2026 | date extend 4 | Date | 23-Sep-2026 |
| 5 | 21-Aug-2026 | Date extend corrigendum | Date | 02-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Repair work on Hariyamali to Sarangwas road Km 0/0 to 1/0 & 1/0 to 2/0 Providing and laying granular sub-base material having P.I.not more than 6, including spreading in layers not exceeding 150 mm compacted thickness and consolidation by 8-10 tonne power roller to required camber and grade including cost of water and hire charges of machinery, including T&P with all lead (Compacted thickness to be measured).as per MORTH specification table 400-1, 400-2 : For grading-III with CBR value not less than 20.to attain 100% proctor density. |
| 2 | Providing, laying, spreading and compacting stone aggregate of specfic as per table 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing roll-ing with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill-up the interstices of coarse aggregates watering (with water browser) and rolling making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specfication : Clause 404] Grading III, 53 mm to 11.2 mm, @ 0.91 cum per 10 Sqm for compacted thickness of 75 mm. (Crusher broken)Stone screening type 'B' |
| 3 | Providing and applying primer coat over prepared surface or granular base with bitumen emulsion as per IS: 8887 & manufacturer’s specifications @ 6 kg /10 sqm with a self propelled of towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI 502,112 ( Including cleaning of road surface) Add extra to item No. 6.1 for additional 0.1 Kg per Sqm emulsion |
| 4 | Add extra to item No. 6.1 for additional 0.1 Kg per Sqm emulsion |
| 5 | Providing and applying tack coat on the prepared surface ,with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503,112 ( Including cleaning of Road Surface ) |
| 6 | Add extra to item No. 6.2 for additional 0.75Kg per 10Sqm emulsion |
| 7 | Providing and laying open graded premix carpet 20mm thick (compacted) on prepared surface in a single course as wearing course aggregates as per Table 500-23, heating bituminous binder @ 14.6 Kg/10 Sqm.(VG-30 grade) and aggregates in Hot Mix Plant, transporting the mixed material with tipper and laying with paver finisher to the required level and grade, rolling with power roller, 8-10 tonne but excluding cost of tack and seal coat with lead for mix of material with all lead.[MORTH Specification : Clause 510,112] In approved Hot Mix Plant as per clause 6.5 of Manual, including loading of aggregates with F.E loader with VG-30 bitumen. |
| 8 | Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall, including rolling with a smooth wheeled roller 8 - 10 tonne capacity finished to required level and grades, complete as per MORTH specification clause 511 By Mechanical means Type B - Premixed in in approved HMP as per clause 6.5 of manual having capacity 50 TPH comprising of aggregate (sand or grit) having size 2.36 mm to 180 micron @ 0.06 Cum per 10 Sqm and bitumen binder (VG-30) @ 6.8 Kg / 10 sqm and laying by hydrostatic paver finisher with sensor control, including mixing, transportation, laying, rolling etc. Including Carriage for 20 km Lead |
| 9 | Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc.including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 metres, as per drawing and technical specfication.[MoRTH Specification : Clause : 304]In ordinary Soil [MoRTH Specification : Clause : 301]Depth upto 3m |
| 10 | Providing and laying mechnically mixed and vibrated Cement Concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above Ground/Bed level.[MoRTH Specification : Clause 1000/1700]Cement concrete 1:3:6 mix with stone aggragate 40 mm crusher broken. |
| 11 | Providing and laying Random Rubble masonry in foundation upto a depth of 1.50 metres and 1.50 metres above Ground /Bed level.[MoRTH Specfication: Clause 1000/1400] Cement sand mortar 1:4 |
| 12 | Providing and laying Steel reinforcement at any level in foundation complete as per drawing and technical Specification.[MoRTH Specification : Section: 1600(N)]HYSD bar reinforcement |
| 13 | Providing and laying reinforced cement concrete pipes N.P.3 for culverts including jointing ends and fixing collar with cement mortar 1:2 [MoRTH Specfication : Clause : 1000/2900] 1000 mm dia |
| 14 | Providing & erecting typical Cititzens infromation Board as per approved drawing & specification made of two MS Sheet of 1.6 mm thick each of xize 900mm x 750mm stiffended by angle iron 25mm x 25mm x 3mm all around the plate and plates fixed on frame of 75mm dia pipe of 12 swg sheet ( vertical post 3050mm with angle holdfasts and horizontal member 900mm) to be joined by 5mm thick MS plate at 12 places ( 65mm x 50 mm) duly embedded in cement concrete M-15 grade of block of 600mm x 600mm x 750 mm size below ground level as per enclosed drawings & as directed by engineer-in charge. All MS will by stove enameled on both side lettering figuring and border will be with ready mixed symtheic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and and technical specifications. |
| 15 | Supply & fixing of cautionary / Warning Reflective sign boards made out of 2 mm thick M.S. sheet as per IRC –67-1977, stove enamelled and reflective symbol fixed on Angle Iron of size 65 x 65 x 6mm of 3 meter long : 60 cm equilateral triangle |
| 16 | Supply & fixing of Direction and place identification sign board made out of 2 mm thick M.S. sheet framed to angle iron 40x40x5 mm and two vertical posts of angle iron of size 65x65x6 mm 3 meter long with hold fasts, stove enameled paint reflective letter symbol complete of size. : (a) 150 x 120 cm. |
| 17 | Supply & fixing of Direction and place identification sign board made out of 2 mm thick M.S. sheet framed to angle iron 40x40x5 mm and two vertical posts of angle iron of size 65x65x6 mm 3 meter long with hold fasts, stove enameled paint reflective letter symbol complete of size. : (b) 120 x 75 cm. |
| 18 | Providing and laying of hot applied thermoplastic compound inclusive type I reflectrosing glass beads as per table 800-3, 800-4 applied in uniform thickness of at least 2.5 mm and spread uniformly with reflectorising glass beads type II in addition @ 250 gms per Sqm with a road marking machine as per IRC: 35 complete with traffic diversion arrangement as per MORTH specification clause 803.4. |
| 19 | Supply & fixing of precast reinforced cement concrete M-15 grade kilometre stone of standard design as per IRC: 8-1980, fixing in position in cement concrete 1:4:8 including painting and printing etc. (A) Ordinary Kilometre stone |
| 20 | (B) 200 mr. stone |
| 21 | Supply of Hazard marker made out of 2 mm thick M.S. sheet size 300 x 300 x 3 mm framed with angle iron 25 x 25 x 3 mm and fixed on channel posts 75 x 40 x 6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos, 5 cm dia. reflective sheet on white reflective back ground with additional boarder of 1.25 cm all around it. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 14, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 23, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 days
Sep 02, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender