Tender For Smart Periodicals At All Three Zones Area, Bb Cant, Sirnagar In The Aor Of Age B/R-Ii Under Ge 864 Ews
Tender Value
1 Crore
Estimated cost
Bid Submission
25 Aug 2026
1 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Smart Periodicals At All Three Zones Area, Bb Cant, Sirnagar In The Aor Of Age B/R-Ii Under Ge 864 Ews, Bricks 2 Coarse Aggregate 3 Fine Aggregate Cement 5 Structural Concrete (M-25 Grade & Above) 6 (A) Pcc Block For Walling (Hollow Blocks) 7 Cement Flooring Tiles/Terrazzo Tiles 8 Burnt Clay Roofing Tiles (Hand Made) 9 Mangalore Pattern Roofing Tiles 10 Timber 11 Water For Constructio N Purposes 12 Welding Of Steel Work 13 Timber Panelled And Glazed Door/Window And Shutters 14 Plywood (Is:303) 15 Wood Particle Board (Medium Density Is: 303) 16 Reinforcem Ent Steel Etc.
BOQ
| Sl. No. | Item Description |
| 1 | External Finishing Works |
| 2 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed. |
| 3 | M&L rendering 15mm thick in cement mortar 1:4 using liquid water proofing compound as per manufacturer's instructions on brick work/stone wall or concrete surfaces on other than fair surface of wall or in chajjas/parapet etc. finished even and fair without using extra cement complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 4 | Supply only liquid water proofing compound complete all as specified and directed.Make : Pidilite/Sitka |
| 5 | M&L for applying cement based wall care putty on external surfaces of walls/ceilings/soffits 2mm thick required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc. complete all as specified and directed.Make of wall Putty : JK wall Putty / Birla Wall care Putty.Notes : (i) After completion of the wall putty work and preparation of the surface, the contractor shall inform GE and Engr-in-charge for site inspection before commencing any further finishing work. Further finishing works shall be carried out only after approval of the prepared surface by GE and Engr-in -charge ,duly recorded through a site order. |
| 6 | M&L for preparation of existing surfaces and applying 02 coat of exterior emulsion paint (light shade) with highlighter of any existing shade, @ 10 sq.m/litre/1 coats by using fully automatic airless spray machine of paint application with a flow speed of 3300psi and up to required height and using proper scaffolding arrangements etc. to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc. surfaces by using following brands of emulsion complete all as specified and directed.Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Exterior Emulsion : Asian (Apex) / Berger (WEATHER COAT) / Nerolac (Excel) . |
| 7 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander having mechanical vaccume mechanism having RPM not less than 1500, sanding pad of 80 Grit having Dia 7\\"/9\\" to make the surface free from dust, loose paint, etc. by skilled labour or any type/description of walls/RCC surfaces/ceiling/chajjas/roof projections etc. complete all as specified and directed by Engineer-in-charge. |
| 8 | M&L for preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using fully automatic airless spray machine of paint application with a flow speed of 3300psi and allow 6-8 hours to dry the surface for painting of subsequent coat up to required height and using proper scaffolding arrangements etc. to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc. surfaces over & including a coat of exterior wall primer @ 11 Sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion over and including 2mm thick all weather wall care putty by using following brands of emulsion and primer complete all as specified and directed.Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Exterior Emulsion : Asian (Apex) / Berger (WEATHER COAT) / Nerolac (Excel) . |
| 9 | M&L for preparation of old plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc. and applying two coats of cement base paint with highlighter of any approved shade @ 5 sq.m/kg/1 coat or as recommended by the manufacturer of cement based paint by using following brands of cement based paint using brush or roller complete all as specified and directed by Engineer-in-Charge.Make of Cement Paint : Acro Paints (Super Acrocem) or equivalent as approved by AO |
| 10 | M&L for preparation of old plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc. and applying one coat of cement base paint with highlighter of any existing shade, @ 5 sq.m/kg/1 coat including filling wall putty in depressions, sand papering etc. and making the surface smooth by using following brands of cement based paint and primer by brush or roller complete all as specified and directed by Engineer-in-Charge.Make of Cement Paint : Acro Paints (Super Acrocem) or equivalent as approved by AO |
| 11 | M&L for preparation of existing surfaces of concrete/stone wall and applying 01 coats of Synthetic Enamel paint (shade as approved) using roller/brush to wall surfaces including filling wall putty in depressions, sand papering etc. and making the surface smooth all as specified and directed.Make : Asian Paints/Berger/Nerolac |
| 12 | Internal Finishing Works |
| 13 | Taking down cement plaster of any description, any thickness from internal surfaces of walls/soffits/ceilings etc. incl raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed. |
| 14 | M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed. |
| 16 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander having mechanical vaccume mechanism having RPM not less than 1500, sanding pad of 80 Grit having Dia 7\\"/9\\" to make the surface free from dust, loose paint, etc. by skilled labour of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc. with mechanical means/grinder complete all as specified and directed. |
| 17 | M&L applying wall care putty on internal surfaces of walls/ceilings (2mm thick as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty to make surface smooth and ready for receiving painting complete all as specified and directed.Notes : (i) After completion of the wall putty work and preparation of the surface, the contractor shall inform GE and Engr-in-charge for site inspection before commencing any further finishing work. Further finishing works shall be carried out only after approval of the prepared surface by GE and Engr-in -charge, duly recorded through a site order. |
| 18 | M&L preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using fully automatic airless spray machine of paint application with a flow speed of 3300psi and allow 6-8 hours to dry the surface for painting of subsequent coat up to required height and using proper scaffolding arrangements etc. to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion over and including 2mm thick all weather wall care putty by using following brands of emulsion and primer complete all as specified and directed.Make of Interior Wall Primer: Asian / Berger / Nerolac [Best Quality].Make of Interior Emulsion: Asian (Tractor Shyne) / Berger (BISON Glow) / Nerolac (BEAUTY SHEEN) |
| 19 | M&L for preparation of existing treated surfaces on walls and applying 01 coat of interior emulsion paint (light shade) @ 20 sq.m/litre/1 coat by using fully automatic airless spray machine of paint application with a flow speed of 3300 psi and using proper scaffolding arrangements etc. to wall/ceiling surfaces including filling wall putty in depressions, sand papering etc. and making the surface smooth by using following brands of emulsion complete all as specified and directed.Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Interior Emulsion : Asian (Tractor Shyne) / Berger (BISON Glow) / Nerolac (BEAUTY SHEEN) |
| 20 | M&L for preparation of old surfaces and applying 02 coats of Oil Bond/ Acrylic Distemper to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of OBD by using following brands of emulsion and primer complete all as specified and directed.Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Interior Emulsion : Asian/ Berger/ Nerolac |
| 21 | SYNTHETIC ENAMEL PAINTING ON STEEL SURFACES |
| 22 | M&L for preparing old painted steel and iron surfaces of any description/ section/ trusses/ purlins/ gates/ windows/ fencing post/ grills/ rolling shutters/door frames, roofs etc., and applying 2 coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.Make : Asian Paints/Berger/Nerolac |
| 23 | M&L for preparing old painted steel and iron surfaces of any description /section/ trusses/ purlins/ gates/ windows/ fencing post/ grills/ rolling shutters/door frames , roofs etc., and applying one or more coat of synthetic enamel (PU Based) paint complete all as specified and directed by Engr-in-Charge.Make : Asian Paints/Berger/Nerolac |
| 24 | SYNTHETIC ENAMEL PAINTING ON WOODEN SURFACES |
| 25 | M&L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel (PU Based) paint complete all as specified and directed by Engineer -in-chargeMake : Asian Paints/Berger/Nerolac |
| 26 | FRENCH POLISHING |
| 27 | M&L for preparing old polished wood & wood based surfaces of any description by using sand paper including repairing/filling with putty of suitable material on holes/cracks etc. and applying one coat of Melamine Glossy/Mat finish french polishing to match the existing colour complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender