Tender For Cleaning Of Sewage Sumps, Repair Of Sewage Pipe Lines, Starter Panel And Allied Sewage Treatment Plant Works Under Age(I) Suranussi
Tender Value
10 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
17 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning Of Sewage Sumps, Repair Of Sewage Pipe Lines, Starter Panel And Allied Sewage Treatment Plant Works Under Age(I) Suranussi
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing inrepair of the following spare parts for twin lobe air cooled compressure blower Capacity of 250 mtr cub / hrs complete all as directed by Engr-in-Charge :-(a) Piston Ring (8 Nos each set) |
| 2 | (b) Ball bearing |
| 3 | (c) Pressing bush |
| 4 | (d) Lock nut |
| 5 | (e) Distance ring |
| 6 | (f) 'O' ring |
| 7 | (g) Oil seal |
| 8 | (h) Loking washer |
| 9 | (j) Gear assembly |
| 10 | (k) Tensioning element |
| 11 | (l) Gasket A & B for casing/outer cover |
| 12 | (m) Dowel pin for casing to casing cover A&B |
| 13 | (n) Oil level sight glass |
| 14 | (o) Leader link ( complete set ) |
| 15 | (p) V belt for air blower |
| 16 | (q) Pully for Air Blower |
| 17 | Dismantling, servicing, cleaning, lubrication, reassembly, alignment, tightening, checking of bearings, belts, motor and electrical connections, testing and trial run of Air Compressor Blower of capacity 250 CUm complete as per direction of Engineer-in-Charge.Note: Any spare parts, consumables, lubricants, belts, bearings, or other materials required/replaced during servicing shall be paid separately under the respective BOQ item. |
| 18 | M & L fo dismantling, servicing, cleaning, lubrication, reassembly, alignment, tightening, checking of bearings, testing and trial run of centrifugal pumps of following capacity complete as per direction of Engineer-in-Charge.Note: Any spare parts, consumables, bearings, or other materials required/replaced during servicing shall be paid separately under the respective BOQ item. Capacity up to 3 HP |
| 19 | all as per item No. 03 but capacity 5 H.P. to 7.5 HP |
| 20 | Supply and fixing the following worn out parts of self priming Centrifugal pump set 5 H.P. to 7.5HP installed at STP complete all as directed by Engr-in-charge :-(a) CI impellor |
| 21 | (b) Oil Seal |
| 22 | (c) Ball bearing of suitable size |
| 23 | (d) Mechnical water seal of sutable size |
| 24 | Disconnection and taking out of UNSV Butterfly valve and supply and fixing new Butterfly valve cast iron (ISI Marked) of the following sizes:-(a) 80mm dia |
| 25 | (b) 50 mm dia |
| 26 | Supply & filling ENKLO 320 or equivalent oil for lubrication of air cooled compressor |
| 27 | Material and labour for cleaning of sewage treatment plant of capacity 0.25 MLD (STP Map) all chamber i.e inlet chamber Screening chamber, oil grease chamber treated water tank of approx size 5.5 mx 8.0m x 5.5 m of STP by bailing out the accumulated raw water at the bottom andremoving te complete slit/sludge dirt from the tank and dispositing away exc.1.5 KM and n.exc 5.0 KM from site as di at rected.scrapping tha tank inner walls and bottom with wire brush and cleaning the tank inner walls and bottom by applying anti-bacterial spray completely including applying one coat of white wash to entire tank externally complete all as directed by Engineer-in-charge.Note :- (a) The rate deemed to be inclusive of T&P and transportation required foe disposal of sludge/dirt away from the site. (b) The cleaning of tank shall be performed once in six months as per manufactures recommendations. |
| 28 | Material and labour for cleaning of sewage treatment plant of capacity 1 MLD (STP -7) all tank including inlet chamber Screening chamber, oil grease chamber treated water tank of approx size 8 Mx 6.0m x 5.5 m of STP by bailing out the accumulated raw water at the bottom andremoving te complete slit/sludge dirt from the tank and dispositing away exc.1.5 KM and n.exc 5.0 KM from site as di at rected.scrapping tha tank inner walls and bottom with wire brush and cleaning the tank inner walls and bottom by applying anti-bacterial spray completely including applying one coat of white wash to entire tank externally complete all as directed by Engineer-in-charge.Note :- (a) The rate deemed to be inclusive of T&P and transportation required foe disposal of sludge/dirt away from the site. (b) The cleaning of tank shall be performed once in six months as per manufactures recommendations. |
| 29 | M & L for cleaning of semi under ground raw sewage sump collection chamber of 5.05 depth & dia 6m of tank from ground level in RCC M-30 construction. Removing of slit and sluge to distance not exceeding 50 mtr from GL and dispositing away exc.1.5 KM and n.exc 5.0 KM from etc deposited inside the tank cleaning entire internal surface of tank with bleaching powder and flushing with water all as specified and marking dt of cleaning with enamelled paints as directed |
| 30 | M&L for carrying out chemical analysis BOD,COD,TSS.pH & O&G,NO2, HCL,FC test and all other parameter of treated sewer water of STP (STP MAP /STP G.P. 7) from Govt authorised laboratory all as per CPCB Norms complete all as directed by Engineer-in charge.Note :- The rate quoted is deemed to be inclusive of testing and collection of water samples in sealed PVC container at STPs |
| 31 | Removing old filter media complete of size 1/8 to 1/16.1/16 to 1/32 inch sizes complete in layers of sludge drying beds of size 4x2.50x1.4m scrapping the internal surfaces of sludge drying beds with wire brush and cleaning with bleaching powder slurry,cleaning with fresh water including applying one coat of white wash on external surface of sludge drying bed and refiling up with new fiter media in layers all as per maufactures/reommendations/exsiting including teting and commissioning etc. complete all as directed. Note - new filter media will be measured and paid separately under relevant item of BOQ. |
| 32 | Supply only aggregate filter media for STP(as per existing ) complete of size 1/8 to 1/16.1/16 to 1/32 inch size complete in layers as perexisting complete all as specified and as directed |
| 33 | Material and Labour for Cleaning of E/M Installations yard ( STP) by cutting bushes,shrubs/cleaning grass and other wild growth trees with grass cutting machine including all necessary T&P and accessories,petrol, diesel upto satisfaction level all as directed by Engineer in charge |
| 34 | Disconnecting the electrical connection & taking down/up the burnt out Non clog sewage Submersible pump from any location and transporting to workshop for repair, dismantling the motor & taking out burnout copper winding and rewinding the same with super enamelled copper wire as per existing gauge including replacement of bearings & correcting minor defects, reassembling, transporting motor from workshop to site, reinstalled at site, reconnecting, testing and commissioning complete all as specified & directed. for the following capacity (a) 3 to 5 HP |
| 35 | all as per item No. 15 but capacity 7.5 HP to 10 HP |
| 36 | all as per item No. 15 but capacity 15 HP to 20 HP |
| 37 | Disconnecting the electrical connection & taking down/up the burnt out induction motor or compressor motor from any location and transporting to workshop for repair, dismantling the motor & taking out burnout copper winding and rewinding the same with super enamelled copper wire as per existing gauge including replacement of bearings & correcting minor defects, reassembling, transporting motor from workshop to site, reinstalled at site, reconnecting, testing and commissioning complete all as specified & directed. for the following capacity (a) 1 HP |
| 38 | all as per item No. 18 but capacity 3 HP to 5 HP |
| 39 | all as per item No. 18 but capacity 7.5 HP to 10 HP |
| 40 | all as per item No. 18 but capacity up to 20 HP |
| 41 | M&L for removing all paint by removers or burssing off by blow lamp and cleaning with scrappers any number of coats any width or grith/description and painting with two coats of synthetic enemelled paint over a coat of red oxide primer as per colour including writing pump No. and capcity of the pump with white paint all as direted by Engr-In- Charge for the following capacity of plant installed at suranussi area :-(a) 1HP |
| 42 | (b) 3 HP to 5 HP |
| 43 | (c) 7.5 HP to 10 HP |
| 44 | (b) Air compressor including motor |
| 45 | (e) LT panel boards |
| 46 | (f) Piping control valves for STP |
| 47 | (g) Suction delevery pipe line upto 150 mm dia |
| 48 | (h) Filter tank |
| 49 | S&F in repairs pressure gauge (0-10 Kg/Cm²) including necessary specials and provision of suitable ferrule etc., complete all as specified and directed. |
| 50 | Supply and fix contactor with 220 Volt. AC-03 rating 18 Amp 440 volt cmplete all as specified and directed. Make :- L&T/Havells/Siemen |
| 51 | Supply and fix contactor with 220 Volt. AC-03 rating 25 Amp 440 volt cmplete all as specified and directed. Make :- L&T/Havells/Siemen |
| 52 | Supply and fix in replacement MCCB 200 Amp 4 pole 36 KA 415 Volt complete all as specified and directed. Make :- L&T/Schneinder/Havells |
| 53 | Supply and fix in replacement MCCB 160 Amp 4 pole 36 KA 415 Volt complete all as specified and directed. Make :- L&T/Schneinder/Havells |
| 54 | Supply and apply a non- selective systemic herbicide (e.g. round off or equivalent containing Glyphosate) for purpose of grass and weed eradication .the herbicide must be applied according to the manufacturer instruction local environmental regulations, and in suitable weather condition to ensure effectiveness and safety .all neccessory precaution shall be taken to avoid damage to nearbr desirable vegetation or contamination of soil and water sources. Location;-STP G.P. 7 and STP Map Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender