Tender For Selection Of Agency For Plantation, Renovation & Beautification Of Different Pokhari , Under Vyasanagar Muncipality In The District Of Jajpur .
Tender Value
12.71 Crore
Estimated cost
Bid Submission
18 Aug 2026
17 days left
EMD
12.71 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jajapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Selection Of Agency For Plantation, Renovation & Beautification Of Different Pokhari , Under Vyasanagar Muncipality In The District Of Jajpur .
BOQ
| Sl. No. | Item Description |
| 1 | Drain of water from pond using Pump with 10HP diesel engine |
| 2 | Supplying all labour, T&P and earth work in excavation in all kinds of soil within initial lead of 50m lead & initial lift of 1.50m. including rough dressing breaking clods & laying in layers not exceeding 0.30m. In depth, leveling the bed, using pans, vessels for slushy soil & including sundries supervision charges & labour cess etc, as per the direction of Engineer-in-charge. |
| 3 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes ,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 4 | Supplying all materials, labour, T&P and providing cement concrete(1:3:6) with 40cm size crusher broken black hard granite metal including watering , curing, conveyance of all materials to work site, payment of royalty taxes,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.. |
| 5 | Supplying all labour, materials ,T&P and providing Reinforced Cement concrete (1:1½:3) with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance & royalty ,sundries , watering ,curing &lifting &laying concrete at a height of 5mtr. Maximum,contractor profit & labour cess complete etc all complete (Excluding cost of reinforcement & centering & shuttering) |
| 6 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
| 7 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. Ref(A/R-2006,P-103,Item no-27) |
| 8 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. |
| 9 | Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in Cement mortar in Cement Mortar (1:4) after immersing the bricks for hours in water before use including splays,cutting,circular moulding ,corbelling ,champhering and similar such type of works,scaffolding,watering ,curing ,the work including cost of conveyance & royalty ,sundries & watering for curing & supervision charges,contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge .F&P. |
| 10 | Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in Cement mortar in Cement Mortar (1:4) after immersing the bricks for hours in water before use including splays,cutting,circular moulding ,corbelling ,champhering and similar such type of works,scaffolding,watering ,curing ,the work including cost of conveyance & royalty ,sundries & watering for curing & supervision charges,contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge . S/S. |
| 11 | Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete excluding cost of Tile. |
| 12 | Collecting , supplying and filling at the road side of good earth including transpotation of earth within 10km lead including loading and unloading at site within initial lift including watering with all cost and taxes ,etc complete. |
| 13 | Supplying Fitting & fixing of MS Door.Windows with Grill including all cost & carriage etc. |
| 14 | Supplying all materials, labour,T&P and finishing surface of walls with cement based wass putty(Water Based) of approved make and finished smooth and even surface to receive paiting including cost of scaffolding staging charges with cost of all materials,taxes & labour cess etc all complete as per the direction of Engineer-in-charge. |
| 15 | Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, taxes, conveyance, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge. |
| 16 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 17 | Sitting bench of rcc including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 18 | Play and gym Equipment including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Multi Play StationMulti-Purpose Play Unit :- Area-13 Mtr X 9 Mtr. Consists of: -1. Square Deck-7’ ht with FRP roof-01 no2. Square Deck-5’ ht with FRP roof-04 no3. Square Deck-3’ ht with FRP roof-01 no4. Suspension Bridge-8’ long- 02no5. Hanging Bridge-8’ long-01 no6. FRP Tunnel-6’ long-02 no7. Spiral Slide-7’ht: -01 no8. Step Ladder: -02 no9. Fire Man pole: - 01 no10. Ship Ladder: - 01 no11. Zebra Climber-5’ht.: - 01 no12. Plain Slide-5’ ht.: -01 no13. Handi Hold: - 01 no14. Wave Slide-5’ ht.: -01 no15. Bowl Slide-3’ ht.: -01 no. FMPU-02 |
| 19 | Swing Set (baby Swing and Standard Swing)S/F fixing of Baby SwingAs the name suggests, two children can enjoy the two seater arc swing at one time. The arched shaped side frame is made of 50 NB GI pipes and top pipe is made up of 50 NB GI pipes. The frame is pu coated to give an aesthetic look. The double swing seat are made up of 10 mm thick anti skid chequered reinforced rubber top. The rubber belt seat is suspended on 6 mm plastisol coated GI chain. The ball bearings are mounted inside a specially designed Nylon Clamp. The height of the swing is 7’ and length is 10’. S/F fixing of Standard SwingAs the name suggests, two children can enjoy the two seater arc swing at one time. The arched shaped side frame is made of 65 NB GI pipes and top pipe is made up of 50 NB GI pipes. The frame is pu coated to give an aesthetic look. The double swing seat are made up of 10 mm thick anti skid chequered reinforced rubber top. The rubber belt seat is suspended on 6 mm plastisol coated GI chain. The ball bearings are mounted inside a specially designed Nylon Clamp. The height of the swing is 7’ and length is 10’ |
| 20 | Double Slide / Spiral SlideS/F fixing of Double SLIDEThe Double Slide with over all covering area 15’-0 x 2’-6” and safe play area 18’-0 x5’-0’-0 with platform height 7’-0”. Slide chute made up of FRP with 15” width. Centre support of 40mm dia NB GI ISI marked pipe having same type ladder with main frame at 25mm dia NB GI ISI marked and GI steps and 20mm NB GI pipe hand rail. The concrete blocks will be made by in the ratio of 1:2:4 with the combination of cement sand and concrete..S/F fixing of Spiral SLIDE The Spiral Slide with over all covering area 12’-0 x 8’ and safe play area 15’-0 x10’ with platform height 5’-00”. Slide chute made up of FRP with 32” width. Centre support of 100mm dia NB GI ISI marked pipe having same type ladder with main frame at 32mm dia NB GI ISI marked and sheet metal steps and hand rail. The equipment is painted with PU paints. The concrete blocks will be made by in the ratio of 1:2:4 with the combination of cement sand and concrete. |
| 21 | See-SawThe double see saw is a good entertainer for the children. The 4 seats of the see saw are made from FRP. The main frame is of 2 nos of 40 NB GI pipes of 8’ length and is fitted on 50 NB GI pipe frame. The bearing used is of heavy duty bush type. |
| 22 | Merry-Go-RoundThe main frame of the duck merry go round is made up of 20 NB & 32 NB GI pipes. The GI pipes are pu coated. The stand is made in 80 NB GI pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The animal seats are made out of FRP. It accommodates four children at a time. |
| 23 | Spring RiderThe main frame is made of 12 mm coil spring of 20\\" height attached on a MS angle frame with FRP Seat animal like Duck, Horse, Whale etc. All are PU painted. |
| 24 | Climbing Net / Rope ClimberProviding and fixing in position Ha Rope Climber of approved design and make of minimum 7ft height X 15ft width size consisting of |
| 25 | Monkey BarSAFE AREA : 3.9M x 1.8MCENTRE PIPE : 40 NB GI B-class Pipe MAIN FRAME : 65 NB GI B-CLASS PipeNUT BOLTS CAP : Nylon 66 injection moulded with SS M6 fastners.NUT BOLTS : STAINLESS STEEL M6 x 20, GALVANISED NUT BOLTS. COLOUR: 1 COAT OF EPOXY PRIMER AND 2 COATS OF PU PAINT |
| 26 | Balance beam |
| 27 | Rock Climbing WallThe Rock climber is made up of FRP. The rocks are molded on same platform and it has gradient from the ground. The climber is supported by 25 NB GI pipe at the bottom for ground support |
| 28 | Crawl TunnelThis is a pipe shaped module of specific diameter made from roto moulded plastic, with support pipe of 40 NB GI pipe. The sides of the tunnel are provided with slots for outside view for the children while crawling. |
| 29 | Sand play area(20 feetX20FeetX8Inch) |
| 30 | Outdoor trampoline10’ ft dia with side Facing |
| 31 | Benches for ParentsProviding and fixing in position 3 seaters Designer Bench of approved design and make of minimum area 1.5 meter x 0.60meter. Overall all minimum height 0.80 m consisting of 1. FRP Channel Strip-seat & back with end cap- (C - Section of thickness upto 5mm ,1200mm long with wooden finish bolted to side frames.)2. BENCH FRAME (cast iron designer frame conforming to IS 1730 made from sand casting method). |
| 32 | DustbinThe dustbins are made of FRP in different cartoon shapes and painted with attractive colours. The dust bins are of height 4’ and having facility to drop waste from front and remove them from behind door. The dust bins are having facility to anchor ate site with cement concrete. |
| 33 | Shade Structure / GazeboProviding and fixing in position FRP GAZEBO of 12ft x 12ft of approved design and make of maximum area 3.6 meter x 3.6 meter. Overall all minimum height 2.4 meter consisting of a. 8 nos. of poles made of GI pipe of 50 NB dia. fixed at 8 corners of the GAZEBO. The structural frame of the GAZEBO is made of MS square pipe frame of 32 mm.b. The Chute of the GAZEBO roof is made of FRP 4 mm thickness in the shape of Pyramid. The roof of the gazebo is having a surface mounted LED panel light for illumination. c. It shall have 4 nos of FRP Chairs where 8 persons can accomodate and 1 FRP Centre Table. |
| 34 | Drinking water facility(to be paid as actual voucher) |
| 35 | Safety fencing and entrance gate |
| 36 | Information/signage board |
| 37 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of |
| 38 | Providing and Laying/Planting Zoysia Japonica grass with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler etc Complete. GRASS AREA |
| 39 | Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 40 | Providing and Displaying of Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. |
| 41 | Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. |
| 42 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge.. |
| 43 | Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bags as per direction of the officer-in-charge. |
| 44 | Site Prepararion Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). |
| 45 | Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment). |
| 46 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) . |
| 47 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 48 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 49 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) |
| 50 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : |
| 51 | ELECTRICAL POLE:Aluminium pressure cast 2.5ft. LIGHT SOURCE- LED, Driver Technology -IC based, 130lumen/watt, Luminaire light beam spread -7° - 9° x 177°,Housing Material-Aluminum die cast, LM-80 , IP 65, pf>0.98,watt-9W,Input Voltage -100 to 240 V, Input Frequency - 50 Hz, Ambient temperature range - -40 to +50 °C,Init. Corr. Color Temperature -4000 K,Init. Color Rendering Index- >70,Power consumption tolerance-+/-11%,LED MAKE- philips/edition Pathway/Bollard light 9W, 2.5 ft. Pole with luminaire solar |
| 52 | POLE:GI tube 2.5mm thickness, inner dia 2'',Pole Structure-Cylindrical/Tubular,LIGHT SOURCE-LED, Driver Technology -IC based, 130lumen/watt, Luminaire light beam spread-7° - 9° x 177°, Housing Material -Aluminum die cast,LM- 80 , IP 65, pf>0.98,watt-12W,,Input Voltage -100 to240 V, Ambient temperature range - -40 to +50 °C,Init. Corr. Color Temperature -4000 K,Init. Color Rendering Index- >70,Power consumption tolerance- +/- 11%,Input Frequency - 50 Hz,LED MAKE- philips/edition Lawn Light 12W,8ft. Pole with luminaire Solar |
| 53 | Rated Voltage-1100V, Material- Plain annealed high conductivity Flexible copper conductor as per Class 5 of IS 8130/2013 latest, Max. D.C Cond. Resistance at 20 Deg. C.-19.5 Ohm/km, Insulation Material - PVC type D, Insulation thickness- 0.6mm, Sheath Material - Extruded PVC Type 'ST3' as per IS:5831/84, Sheath Thickness- 0.9mm, Max. conductor temp. under normal operating conditions - 70°C, Max conductor temp at the termination of short circuit - 160°C,As per IS 8130/2013,IS 694/2010, etc. with latest up to date amendments 1.5 sqmm, 2-core Cu- wire with cover jacket |
| 54 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSURE made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed . (FOR EXTERNAL) with 20A TPN MCB 01 NO. |
| 55 | \\"Supply, fabrication, installation, testing and commissioning of illuminated signage board comprising ACP sheet cladding, MS supporting frame, LED backlit/acrylic/stainless steel letters of approved design and size, complete with LED modules, drivers, wiring, conduit, fixing accessories and all incidental works as required for proper functioning.\\" |
| 56 | Supply and installation of one Floating Flower Fountain Consisting of Round FRP Float of size 7ft dia filled with PUF and attached with GI and SS Frame.Fountain Patterns 1 no. of GI heavy Three Stage Flower Nozzle in forming Three Stage Fountain (As shown in figure). Each nozzle is fully adjustable for a precision effect. The total system is fitted on a 7.5 ft dia FRP Floater specially designed for floating fountain.RGB LED Fountain Lights x 16 nos.• Body made of SS.• 54w LEDs in each light.• Waterproofing with IP 68 protection.Power Supply Transformers / SMPS Power Supply / Music System • AC to DC power supply for lights including RGB controllers• Control Panel for the Fountain with Three Phase FacilityThree phase Open well Submersible Pump 7.5 hp = 01nos. |
| 57 | PH Work (To be paid as acutal voucher) |
| 58 | 1KWVertical Axis Wind Turbine (VAWT)Technical SpecificationsTower Less TurbineRated Capacity1 KWRotor TypeVertical Axis, Aerodynamic BladesBlade Height2000 mmRotor Diameter1100 mmBlade MaterialHigh-grade Aluminum Alloy (UV & Corrosion Resistant)Start-up Wind Speed1.5 m/sVoltage Output24/48/60 DCEstimated Daily Generation10–12 Units/Day (Dependent Upon Wind Speed)Noise Level< 40 dB (Quiet Operation)BearingsSKF (Top and Bottom)Drive SystemNon-Direct Drive (Low Friction, Extended Life)ControllerMPPT Smart Wind Controller with Dump LoadPerformance Warranty20 YearsSystem Warranty2 Years |
| 59 | Consultancy Charges for Field measurement of existing structures,Topographcal Survey with Total station and preparation of Master plan & Preparation of DPR.( amout will be calculated on the bnasics of total bill of each pond) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender