Tender For Construction Of 2 Nos. E Type Quarter (S+2) And 6 Nos. D Type Quarter (S+3) Of Ddt, Kbk Division, Koraput, Adt, Koraput, Jds, Koraput And Ads, Koraput Buildings.
Tender Value
4.87 Crore
Estimated cost
Bid Submission
11 Aug 2026
11 days left
EMD
4.88 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 2 Nos. E Type Quarter (S+2) And 6 Nos. D Type Quarter (S+3) Of Ddt, Kbk Division, Koraput, Adt, Koraput, Jds, Koraput And Ads, Koraput Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work in exavation of foundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect for the work as directed by the Engineer-in-charge. |
| 2 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect and as per direction of Engineer-in-Charge. |
| 3 | Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete. |
| 4 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 5 | RCC work of M-25 grade in the following Structural building works using 20mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T and P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)RCC work of M-25 grade concrete in Column Base Footing |
| 6 | RCC work of M-25 grade concrete in Column Super Structure (Ground Floor) |
| 7 | First Floor |
| 8 | Second Floor |
| 9 | Third Floor |
| 10 | Head room |
| 11 | RCC work of M-25 grade concrete in Plinth Band |
| 12 | RCC work of M-25 grade concrete in Lintel Band (Ground Floor) |
| 13 | First Floor |
| 14 | Second Floor |
| 15 | Third Floor |
| 16 | RCC work of M-25 grade concrete in Floor Beam Ground Floor |
| 17 | First Floor |
| 18 | Second Floor |
| 19 | Third Floor |
| 20 | Head Room |
| 21 | RCC work of M-25 grade concrete in Chajja (Ground Floor) |
| 22 | First Floor |
| 23 | Second Floor |
| 24 | Third Floor |
| 25 | Head room |
| 26 | RCC work of M-25 grade concrete in Shelves (First Floor) |
| 27 | Second Floor |
| 28 | Third Floor |
| 29 | RCC work of M-25 grade concrete in Stair case (Ground Floor) |
| 30 | First Floor |
| 31 | Second Floor |
| 32 | Third Floor |
| 33 | RCC work of M-25 grade concrete in Roof Slab (Ground Floor) |
| 34 | First Floor |
| 35 | Second Floor |
| 36 | Third Floor |
| 37 | Head room |
| 38 | Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment) (Ground Floor) |
| 39 | First Floor |
| 40 | Second Floor |
| 41 | Third Floor |
| 42 | Head Room |
| 43 | Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of 25cm x 12cm x 8cm size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T and P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.in Foundation and Plinth |
| 44 | in Super Structure |
| 45 | First Floor |
| 46 | Second Floor |
| 47 | Third Floor |
| 48 | Head Room |
| 49 | At Outer side 12 mm (1/2\\") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. (Ground Floor) |
| 50 | First Floor |
| 51 | Second Floor |
| 52 | Thired Floor |
| 53 | Head Room |
| 54 | In Inner Side 16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. (Ground Floor) |
| 55 | First Floor |
| 56 | Second Floor |
| 57 | Third Floor |
| 58 | Head Room |
| 59 | 6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T and P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-Charge. (Ground Floor) |
| 60 | First Floor |
| 61 | Second Floor |
| 62 | Third Floor |
| 63 | Head room |
| 64 | Supplying, fitting and fixing Vitrified (600mm x 600mm)tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. (Ground Floor) |
| 65 | First Floor |
| 66 | Second Floor |
| 67 | Third Floor |
| 68 | Supplying, fitting and fixing Chequred Tiles in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. (Ground Floor) |
| 69 | Supplying, fitting and fixing Granite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. (Ground Floor) |
| 70 | First Floor |
| 71 | Second Floor |
| 72 | Third Floor |
| 73 | Fixing tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. (Ground Floor) |
| 74 | First Floor |
| 75 | Second Floor |
| 76 | Third Floor |
| 77 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. (Ground Floor) |
| 78 | First Floor |
| 79 | Second Floor |
| 80 | Third Floor |
| 81 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete. (Ground Floor) |
| 82 | First Floor Outside |
| 83 | First Floor Inside |
| 84 | Second Floor Outside |
| 85 | Second Floor Inside |
| 86 | Third Floor Outside |
| 87 | Third Floor Inside |
| 88 | Head Room Outside |
| 89 | Head Room Inside |
| 90 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. (Ground Floor) |
| 91 | First Floor |
| 92 | Second Floor |
| 93 | Third Floor |
| 94 | Head Room |
| 95 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T and P require for the work etc. complete as directed by the E.I.C. (Ground Floor) |
| 96 | First Floor |
| 97 | Second Floor |
| 98 | Third Floor |
| 99 | Head Room |
| 100 | Supplying, fitting, fixing of all types of MS Grills / Gates / MS Door made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. (Ground Floor , Door) |
| 101 | Grill |
| 102 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. (Ground Floor) |
| 103 | Providing and fixing ISI marked 35 mm thick flush door shutters confonning to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete SR-2022, Page 234, Sl No-8 |
| 104 | Supplying, fitting, fixing of two track UPVC Sliding window track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with 6mm thick glass of approved quality complete with frame. Sutters and all fitting and fixtures |
| 105 | Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1) |
| 106 | Painting Two coat with any approved S/E paint over a coat of primer to wood / iron works including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T and P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. |
| 107 | Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2'0\\" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0\\"x2'0\\" with water proof Gypsum board suspended from ceiling including cost of all materials, labour T and P etc required for the work all complete as per direction of the Engineer-in-charge (First floor) |
| 108 | 15cm projection and 15cm deep cornice with brick in cement (1:3) including drip course and cement plaster (1:4) complete.(as per SOR-2022 Page no-227) (Head Room) |
| 109 | 25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. (First floor) |
| 110 | Second Floor |
| 111 | Third Floor |
| 112 | Head Room |
| 113 | Dismentaling & removing R.C.C columns beams, slab, staircase, landing, lintels, including stacking the useful materials for the reuse and removing the debries within 50 m lead. |
| 114 | Dismantling brick masonry in cement mortar 3m. Height including stacking the useful materials for reuse and removing the debris within 50m. Lead. |
| 115 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead |
| 116 | Dismantling and removing R.C.C. Chajja, Shelves, fins and parapet including stacking the useful materials for reuse and removing the debris within 50m lead |
| 117 | Carriage of surplus earth/Material by mechanical means with all cost etc complete |
| 118 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used. |
| 119 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers. |
| 120 | Construction of granular sub-base by providing Gr.-IV material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller. |
| 121 | Plain Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.P.C.C M-20(AR-2006-(P)-258-1(B) |
| 122 | EI WORKS : D TYPE QUARTERRecessed wiring to Light points/fan points/ Exhaust fan/ Call bell in 20mm dia non-metalic flexible Polythine conduit, confir-ming to IS-6946/1973 with 1.5mm² 1.1KV in-sulated, S.C.multistrand HR FR copper wire of ISI marked, confirming to IS-694/1990 and earth continuity in 1.5mm² S/C. Multistrand Cu. wire with Modular switch board of size 150 mmx 200mmx62mm made of 1.22mm thick G.I. Modular Box including provn. of earth screw, painted with one coat of DA grey enamel paint confirming to IS-5133 Part-I 1969 with 3mm thick Modular front cover fixed with steel screw including supply and fixing of 5A.,250V.,Modular switch of ISI marked, confirming to IS-3854/1997 and ceiling rose of ISI marked confirming to IS-371/1999 mounted on C.I. circular box having front Modular cover complete with all accessories and connections. as per direction of Engineer-in-charge. (Make of wire-Finolex/ Anchor/ Havels/V-guard/Polycab/KEI) STILT FLOOR: Group-A |
| 123 | Group-B. |
| 124 | Group-C. |
| 125 | FIRST FLOOR: Group-A |
| 126 | Group-B. |
| 127 | Group-C. |
| 128 | SECOND FLOOR: Group-A |
| 129 | Group-B. |
| 130 | Group-C. |
| 131 | THIRD FLOOR: Group-A |
| 132 | Group-B. |
| 133 | Group-C. |
| 134 | TERRACE & LIFT COONTROL ROOM: Group-A |
| 135 | Group-B. |
| 136 | Group-C. |
| 137 | Recessed wiring for light / power plug with 2 x 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor for loop earthing as required.( Make of wire:-Finolex/Anchor/ Polycab/ HAVELLS/ RR KABLE/KEI ) FIRST FLOOR: |
| 138 | SECOND FLOOR: |
| 139 | THIRD FLOOR: |
| 140 | Recessed wiring plug point on Existing Board with 2 x 2.5mm2 FR PVC insulated SC. multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC Flexible conduit alongwith 1x1.5mm2 FR PVC insulated Single core multistrand copper conductor for loop earthing as required. (Make of wire-Finolex/L&T/ Anchor/Havels/ HPL/Polycab) FIRST FLOOR: |
| 141 | SECOND FLOOR: |
| 142 | THIRD FLOOR: |
| 143 | TERRACE & LIFT COONTROL ROOM: |
| 144 | Recessed wiring for light / power plug with 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire:-Finolex/Anchor/Polycab/ HAVELLS/ RR KABLE/KEI ) FIRST FLOOR: |
| 145 | SECOND FLOOR: |
| 146 | THIRD FLOOR: |
| 147 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB c of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. FIRST FLOOR: |
| 148 | SECOND FLOOR: |
| 149 | THIRD FLOOR: |
| 150 | Recessed wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with FR PVC insulated single core multistrand copper conductor as earth wire as equired.( Make of wire:-Finolex/Anchor/ Polycab/HAVELLS/RR KABLE/KEI ) STILT FLOOR: 1 x 1.5 sq. mm |
| 151 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 152 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 153 | FIRST FLOOR: 1 x 1.5 sq. mm |
| 154 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 155 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 156 | 2 x 4 sq.mm + 1 x 1.5 sq.mm |
| 157 | 2 x 6 sq.mm + 1 x 2.5 sq.mm |
| 158 | SECOND FLOOR: 1 x 1.5 sq. mm |
| 159 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 160 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 161 | 2 x 4 sq.mm + 1 x 1.5 sq.mm |
| 162 | 2 x 6 sq.mm + 1 x 2.5 sq.mm |
| 163 | THIRD FLOOR: 1 x 1.5 sq. mm |
| 164 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 165 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 166 | 2 x 4 sq.mm + 1 x 1.5 sq.mm |
| 167 | 2 x 6 sq.mm + 1 x 2.5 sq.mm |
| 168 | TERRACE & LIFT COONTROL ROOM: 1 x 1.5 sq. mm |
| 169 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 170 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 171 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required. FIRST FLOOR: |
| 172 | SECOND FLOOR: |
| 173 | THIRD FLOOR: |
| 174 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required. FIRST FLOOR: |
| 175 | SECOND FLOOR: |
| 176 | THIRD FLOOR: |
| 177 | TERRACE & LIFT CONTROL ROOM. |
| 178 | Supplying and fixing 15 watt LED bulb & connection etc. as required. FIRST FLOOR: |
| 179 | SECOND FLOOR: |
| 180 | THIRD FLOOR: |
| 181 | TERRACE & LIFT CONTROL ROOM. |
| 182 | Supplying and fixing on Surface/wall mounted type 10 watt bulk head LED light fitting complete with all accessories as required. FIRST FLOOR: |
| 183 | SECOND FLOOR: |
| 184 | THIRD FLOOR: |
| 185 | Supply, Installation, Testing, and Commissioning of Main switches/Change over of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with Rewireable Fuse links,interconnections, earthing, etc. as required as per direction of Engineer in Charge. STILT FLOOR: 32A. DP |
| 186 | FIRST FLOOR: 63A DP |
| 187 | SECOND FLOOR: 63A DP |
| 188 | THIRD FLOOR: 63A DP |
| 189 | Supplying and fixing of following sizes of Metal Box along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. STILT FLOOR: 250 mm X 300 mm X 100 mm deep |
| 190 | FIRST FLOOR: 250 mm X 300 mm X 100 mm deep |
| 191 | SECOND FLOOR: 250 mm X 300 mm X 100 mm deep |
| 192 | STILT FLOOR: 250 mm X 300 mm X 100 mm deep |
| 193 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)FIRST FLOOR: 8 way SPN double door |
| 194 | SECOND FLOOR: 8 way SPN double door |
| 195 | THIRD FLOOR: 8 way SPN double door |
| 196 | Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) STILT FLOOR: 2+4 way |
| 197 | TERRACE & LIFT CONTROL ROOM. 2+4 way |
| 198 | Supply and fixing of following rating four pole (three poles and neutral) 415 V residual current break (RCCB) having a sensitivity current up to 30 mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. 40A D.P. RCCB STILT FLOOR: |
| 199 | 40A D.P. RCCB FIRST FLOOR: |
| 200 | 40A D.P. RCCB SECOND FLOOR: |
| 201 | 40A D.P. RCCB THIRD FLOOR: |
| 202 | 40A D.P. RCCB TERRACE & LIFT CONTROL ROOM. |
| 203 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6-32A. Single pole MCB STILT FLOOR: |
| 204 | 6-32A. Single pole MCB FIRST FLOOR: |
| 205 | 6-32A. Single pole MCB SECOND FLOOR: |
| 206 | 6-32A. Single pole MCB THIRD FLOOR: |
| 207 | 6-32A. Single pole MCB TERRACE & LIFT CONTROL ROOM. |
| 208 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro / Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years . STILT FLOOR: |
| 209 | FIRST FLOOR: |
| 210 | SECOND FLOOR: |
| 211 | THIRD FLOOR: |
| 212 | TERRACE & LIFT CONTROL ROOM. |
| 213 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 20 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years STILT FLOOR: |
| 214 | FIRST FLOOR: |
| 215 | SECOND FLOOR: |
| 216 | THIRD FLOOR: |
| 217 | S/F of Street light- 50W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) STILT FLOOR: |
| 218 | TERRACE & LIFT CONTROL ROOM. |
| 219 | S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) FIRST FLOOR: |
| 220 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greaterthan equal to 215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.(With fan Regulator) FIRST FLOOR: |
| 221 | SECOND FLOOR: |
| 222 | THIRD FLOOR: |
| 223 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider (Zencelo)/legrand( Myrius-NEXT GEN)/ Panasonic (vision) FIRST FLOOR: |
| 224 | SECOND FLOOR: |
| 225 | THIRD FLOOR: |
| 226 | Supplying, installation, of exhaust fan of heavy duty 150 mm with Iron Zalli (Make- Havells/Crompton/ Usha/Orient/ Bajaj ) of Ventilator/ exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. FIRST FLOOR: |
| 227 | SECOND FLOOR: |
| 228 | THIRD FLOOR: |
| 229 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. STILT FLOOR: |
| 230 | FIRST FLOOR: |
| 231 | SECOND FLOOR: |
| 232 | THIRD FLOOR: |
| 233 | TERRACE & LIFT CONTROL ROOM. |
| 234 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with CI/MS cover plate having locking arrangment and watering pipe etc with charcoal and salt as required FIRST FLOOR: |
| 235 | SECOND FLOOR: |
| 236 | THIRD FLOOR: |
| 237 | S/F. of 100A. Cubicle Panel board made out of 16SWG C.R. Sheet with powder coats & following items of 1.8 M x 1.6 M x 30Cm Deptch (Resdl. Panel Board) a) 100A. 25kA. 4Pole MCCB of Havels/ L&T/ C&S/Seaments make:- 01 No. (b) 100A. Cu. Bus Bar complete:- 01 nos. (c) 32A. D.P.. MCB of Havels/ L&T/C&S make:-06 nos. (d) Digital Volt meter, Ammeter, RYB indicators, CT Coils, Selector Switch etc.:- 01 Set. (e)) The panel board is to wired with suitable size of Cu. strips which are to be taped with different colours & Cu. F.R. wire of different colours. (f) The panel board is to fitted with MS frame on floor with C.C. work & M.S.nuts & bolts. |
| 238 | Supplying of following size PVC insulated and PVC sheathed / XLPE power Aluminium / Copper cable of 1.1 kV grade of etc. as required. 3.5 X 25 SQMM STILT FLOOR: |
| 239 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. not exceeding 25 sq.mm |
| 240 | Supplying of following size PVC insulated and PVC sheathed / XLPE power Aluminium / Copper cable of 1.1 kV grade of etc. as required. 2X6 SQMM FIRST FLOOR: |
| 241 | SECOND FLOOR: |
| 242 | THIRD FLOOR: |
| 243 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade on surface as required. not exceeding 25 sq.mm (Spacing between shaddles:0.25 mtr) FIRST FLOOR: |
| 244 | SECOND FLOOR: |
| 245 | THIRD FLOOR: |
| 246 | Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield/ Ceasefire/Safex/Flameklog) |
| 247 | Supply, installation, testing and commissioning of 15Ltr. Geyser of Havels-Velora+ GHWAFATIB015 (5 Star) Ivory, 230 V AC, complete with safety valve, thermostat, thermal cut-out, wall mounting brackets, inlet/outlet connections, and all accessories, as required at site, complete as directed by Engineer-in-Charge. FIRST FLOOR: |
| 248 | SECOND FLOOR: |
| 249 | THIRD FLOOR: |
| 250 | Design, Manufacture, Supply, Erection, Installation, Testing and commissioning of 10 Persons Passenger Lift with (4 Stops-0.66 Speed ) Power Operated Sliding door - Stainless Steel - Hairline finish, Battery Operated Emergency light and Alarm bell, Call Register Signal and Vision Panel Door Operator Landing Push Button in Landing Door Frames, Automatic Rescue Device Push Button - Orange LED illumination, Full Car Operating Panel, Dot Matrix Led D&P Indicators in Car & Landings - Orange Colour, Floor Announciator, Firemans Switch, False Ceiling in car, Infra Red Door Screen Overload warning Indicator, Scaffolding, Pit Ladder, Ss Handdrill, Minor Builders work, Stainless Steel Braille Button with S.S. Cover. with One Year Maintenance free Service from the date of handing over. (OTIS, Johnson, Mitsubishi, Thyssen Krupp ) |
| 251 | EI WORKS : E TYPE QUARTERRecessed wiring to Light points/fan points/ Exhaust fan/ Call bell in 20mm dia non-metalic flexible Polythine conduit, confir-ming to IS-6946/1973 with 1.5mm² 1.1KV in-sulated, S.C.multistrand HR FR copper wire of ISI marked, confirming to IS-694/1990 and earth continuity in 1.5mm² S/C. Multistrand Cu. wire with Modular switch board of size 150 mmx 200mmx62mm made of 1.22mm thick G.I. Modular Box including provn. of earth screw, painted with one coat of DA grey enamel paint confirming to IS-5133 Part-I 1969 with 3mm thick Modular front cover fixed with steel screw including supply and fixing of 5A.,250V.,Modular switch of ISI marked, confirming to IS-3854/1997 and ceiling rose of ISI marked confirming to IS-371/1999 mounted on C.I. circular box having front Modular cover complete with all accessories and connections. as per direction of Engineer-in-charge. (Make of wire-Finolex/ Anchor/ Havels/V-guard/Polycab/KEI) STILT FLOOR: Group-B |
| 252 | Group-C. |
| 253 | FIRST FLOOR: Group-A |
| 254 | Group-B. |
| 255 | Group-C. |
| 256 | SECOND FLOOR: Group-A |
| 257 | Group-B. |
| 258 | Group-C. |
| 259 | Recessed wiring for light / power plug with 2 x 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor for loop earthing as required.( Make of wire:-Finolex/Anchor/ Polycab/ HAVELLS/ RR KABLE/KEI ) FIRST FLOOR: |
| 260 | SECOND FLOOR: |
| 261 | Recessed wiring plug point on Existing Board with 2 x 2.5mm2 FR PVC insulated SC. multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC Flexible conduit alongwith 1x1.5mm2 FR PVC insulated Single core multistrand copper conductor for loop earthing as required. (Make of wire-Finolex/L&T/ Anchor/Havels/ HPL/Polycab) FIRST FLOOR: |
| 262 | SECOND FLOOR: |
| 263 | Recessed wiring for light / power plug with 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire:-Finolex/Anchor/Polycab/ HAVELLS/ RR KABLE/KEI ) FIRST FLOOR: |
| 264 | SECOND FLOOR: |
| 265 | Recessed wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with FR PVC insulated single core multistrand copper conductor as earth wire as equired.( Make of wire:-Finolex/Anchor/ Polycab/HAVELLS/RR KABLE/KEI ) STILT FLOOR: 1 x 1.5 sq. mm |
| 266 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 267 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 268 | FIRST FLOOR: 1 x 1.5 sq. mm |
| 269 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 270 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 271 | 2 x 4 sq.mm + 1 x 1.5 sq.mm |
| 272 | 2 x 6 sq.mm + 1 x 2.5 sq.mm |
| 273 | SECOND FLOOR: 1 x 1.5 sq. mm |
| 274 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 275 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 276 | 2 x 4 sq.mm + 1 x 1.5 sq.mm |
| 277 | 2 x 6 sq.mm + 1 x 2.5 sq.mm |
| 278 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required. FIRST FLOOR: |
| 279 | SECOND FLOOR: |
| 280 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required. FIRST FLOOR: |
| 281 | SECOND FLOOR: |
| 282 | Supplying and fixing 15 watt LED bulb & connection etc. as required. FIRST FLOOR: |
| 283 | SECOND FLOOR: |
| 284 | Supplying and fixing on Surface/wall mounted type 10 watt bulk head LED light fitting complete with all accessories as required. STILT FLOOR: |
| 285 | Supply, Installation, Testing, and Commissioning of Main switches/Change over of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with Rewireable Fuse links,interconnections, earthing, etc. as required as per direction of Engineer in Charge. FIRST FLOOR: 63A DP |
| 286 | SECOND FLOOR: 63A DP |
| 287 | Supplying and fixing of following sizes of Metal Box along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.FIRST FLOOR: 250 mm X 300 mm X 100 mm deep |
| 288 | SECOND FLOOR: 250 mm X 300 mm X 100 mm deep |
| 289 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)FIRST FLOOR: 8 way SPN double door |
| 290 | SECOND FLOOR: 8 way SPN double door |
| 291 | Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) STILT FLOOR: 2+4 way |
| 292 | Supply and fixing of following rating four pole (three poles and neutral) 415 V residual current break (RCCB) having a sensitivity current up to 30 mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. 40A D.P. RCCB STILT FLOOR: |
| 293 | 40A D.P. RCCB FIRST FLOOR: |
| 294 | 40A D.P. RCCB SECOND FLOOR: |
| 295 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6-32A. Single pole MCB STILT FLOOR: |
| 296 | 6-32A. Single pole MCB FIRST FLOOR: |
| 297 | 6-32A. Single pole MCB SECOND FLOOR: |
| 298 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro / Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years . STILT FLOOR: |
| 299 | FIRST FLOOR: |
| 300 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 20 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years STILT FLOOR: |
| 301 | S/F of Street light- 50W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) STILT FLOOR: |
| 302 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to 215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.(With fan Regulator) FIRST FLOOR: |
| 303 | SECOND FLOOR: |
| 304 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider (Zencelo)/legrand( Myrius-NEXT GEN)/ Panasonic (vision) FIRST FLOOR: |
| 305 | SECOND FLOOR: |
| 306 | Supplying, installation, of exhaust fan of heavy duty 150 mm with Iron Zalli (Make- Havells/Crompton/ Usha/Orient/ Bajaj ) of Ventilator/ exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. FIRST FLOOR: |
| 307 | SECOND FLOOR: |
| 308 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. STILT FLOOR: |
| 309 | FIRST FLOOR: |
| 310 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with CI/MS cover plate having locking arrangment and watering pipe etc with charcoal and salt as required FIRST FLOOR: |
| 311 | SECOND FLOOR: |
| 312 | Supply & laying of 2 core 6 mm² PVC Al. Twin core Un-bonded wire of ISI marked.(Make-Havels/Polycab) of etc. as required. (Service Cable) FIRST FLOOR: |
| 313 | SECOND FLOOR: |
| 314 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . 5 Star Inverter Type - Cooling only (Category II) FIRST FLOOR: 1.5 TR with 5 Star BEE Rating (LG-AS-Q20JWZE/ O General-ASGG18CGWA-B/ Daikin-FTKU50XV16) |
| 315 | SECOND FLOOR: 1.5 TR with 5 Star BEE Rating (LG-AS-Q20JWZE/ O General-ASGG18CGWA-B/ Daikin-FTKU50XV16) |
| 316 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB c of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. FIRST FLOOR: |
| 317 | SECOND FLOOR: |
| 318 | Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job.1 TR to 3 TR high wall split A.C FIRST FLOOR: |
| 319 | SECOND FLOOR: |
| 320 | Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.1 TR to 3 TR high wall split A.C FIRST FLOOR: |
| 321 | SECOND FLOOR: |
| 322 | Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.25mm nom. Dia pipe FIRST FLOOR: |
| 323 | SECOND FLOOR: |
| 324 | Supply and fixing of 4kVA Voltage stabilizer (Make-V-Guard/Microtek FIRST FLOOR: |
| 325 | SECOND FLOOR: |
| 326 | Supply, installation, testing and commissioning of 15Ltr. Geyser of Havels-Velora+ GHWAFATIB015 (5 Star) Ivory, 230 V AC, complete with safety valve, thermostat, thermal cut-out, wall mounting brackets, inlet/outlet connections, and all accessories, as required at site, complete as directed by Engineer-in-Charge. FIRST FLOOR: |
| 327 | SECOND FLOOR: |
| 328 | PH WORKS \\"D\\" TYPE QURTERProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC pipe SDR-11 First Floor |
| 329 | Second Floor |
| 330 | Third Floor |
| 331 | 25mm dia C-PVC pipe SDR-11 Ground Floor |
| 332 | First Floor |
| 333 | Second Floor |
| 334 | Third Floor |
| 335 | 32mm dia C-PVC pipe SDR-11 First Floor |
| 336 | Second Floor |
| 337 | Third Floor |
| 338 | 40 mm dia C-PVC pipe SDR-11 top Floor |
| 339 | Supplying all materials, labour T and P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 340 | 15mm dia CP two way bib cock (Jaquar)CON-041KN |
| 341 | 15mm dia CP Bib cock (Con-CHR-047KN Jaquar make) |
| 342 | 15mm dia CP Long body Bib cock (Con-CHR-107KN Jaquar make) |
| 343 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 344 | 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565 |
| 345 | WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR) |
| 346 | 25mm dia brass full way valve (Shakti make) |
| 347 | 32mm dia brass full way valve (Shakti make) |
| 348 | 40mm dia brass full way valve (Shakti make) |
| 349 | 15mm CP Extension piece |
| 350 | 125mm CP grating |
| 351 | 15mm size C.P. flange |
| 352 | Supplying all materials , labour, T and P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 3rd Floor |
| 353 | supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.First Floor |
| 354 | Second Floor |
| 355 | Third Floor |
| 356 | Supplying all materials , labour, T and P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargeFirst Floor |
| 357 | Second Floor |
| 358 | Third Floor |
| 359 | Supplying all materials, labour, T and P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.First Floor |
| 360 | Second Floor |
| 361 | Third Floor |
| 362 | Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 363 | 80mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 364 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 365 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 366 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 367 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 368 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 369 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 370 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 371 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 372 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 373 | 75mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make) |
| 374 | 75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 375 | 75x75x75mm U-PVC double equal door Tee(Ori Plast/Finolex/Supreme Make) |
| 376 | 75mm U-PVC vent cowl(Ori Plast/Finolex/Supreme Make) |
| 377 | Supplying all materials, labour, T and P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 378 | Supplying all materials, labour, T and P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)European water closet with 'S' trap plain(Hindware/Parryware/Neycer make) |
| 379 | Supplying all materials, labour T and P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 380 | Supplying all materials, labour T and P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 381 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) |
| 382 | Supplying all materials, labour, T and P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mm x 600mm long CP towel rail |
| 383 | CP towel Ring |
| 384 | Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 385 | Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600 x 125mm plate glass shelf with CP guard rails |
| 386 | Supplying all materials, labour, T and P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror |
| 387 | Supplying all materials labor T and P and Fitting and fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.15mm CP revolving shower (Jaquar)CON-CHR-209KN |
| 388 | Supplying all materials, labour, T and P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24 x 18 x 10 sink(Parryware make) (Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) |
| 389 | Supplying all materials , labour, T and P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 390 | Supplying all materials , labour, T and P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 391 | Supplying all materials, labour, T and P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeFirst Floor |
| 392 | Second Floor |
| 393 | Third Floor |
| 394 | Supplying all materials labour & laying the waterproofing material of Dr. fixit torch shield P3160(3mm) with its primer 2 coats or equivalent water proofing materials after drying cleaning the concrete surface over the concrete floor/roof/balcony/ sunken and dado upto1'6\\" in wall including cleaning, applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to worksite etc. all complete as per the direction of the Engineer- in- charge. |
| 395 | Supplying all materials, labour, T and P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeFirst Floor |
| 396 | Second Floor |
| 397 | Third Floor |
| 398 | Supplying all materials, labour, T and P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx60cmFirst Floor |
| 399 | Second Floor = (Qnty same as FF) |
| 400 | Third Floor = (Qnty same as FF) |
| 401 | Supplying all materials,labour,T and P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.First Floor |
| 402 | Second Floor |
| 403 | Third Floor |
| 404 | Supplying all materials, labour, T and P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx30cm First Floor |
| 405 | Second Floor =(Qnty same as FF) |
| 406 | Third Floor =(Qnty same as FF) |
| 407 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 408 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge |
| 409 | Supplying all materials, labour, T and P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge110mm dia u-pvc pipe alround concrete |
| 410 | 160mm dia u-pvc pipe alround concrete |
| 411 | Supplying all materials ,labour ,T and P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18 dia RCC MH cover |
| 412 | Supplying all materials labor T and P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18 dia RCC Cover ) |
| 413 | Supplying all materials labour T and P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 414 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 415 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 416 | Supplying all materials labor T and P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 417 | Supplying all materials, labor T and P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 418 | Supplying all materials, labour, T and P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 419 | Supplying all materials, labour, T and P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 420 | Supplying all materials, labour, T and P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 421 | Supplying all materials, labour, T and P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 422 | Supplying all materials.labour.T and P and providing brick work in foundation and plinth with 23cmx111cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 423 | Supplying all materials,labour,T and P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 424 | Supplying all materials,labour,T and P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 425 | Supplying all materials, labour, T and P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 426 | Supplying all labor T and P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 427 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessoriesLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only Drilling of 200mm dia bore |
| 428 | 31 mtr to 45mtr |
| 429 | Drilling of 150mm dia bore 46 mtr to above |
| 430 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.00 mtr to 45 mtrs Lowering of 200mm dia P.V.C casing pipes |
| 431 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe |
| 432 | Supplying all materials, labour, T and P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 433 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in chargeBy DTH Rig |
| 434 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: Rocky terrain with boulder formation for 300m depth |
| 435 | Supplying all materials, labour, T and P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 436 | DOL Control panel |
| 437 | 40mm dia steel short piece |
| 438 | Well cap |
| 439 | 50mm size CI bracket |
| 440 | 2.50sqmm flat cable |
| 441 | 20mm dia rigid UPVC pipes |
| 442 | Steel rope with cover |
| 443 | Labour charges for lowering including transportation |
| 444 | Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make) |
| 445 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 125mmdia G.I/P.V.C/M.S casing pipes for housting fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), Sinking of 125 mm X 100 mm dia bore well with Instalation of Hand Pump 00 mtr to 45mtr Drilling of 125mm dia bore |
| 446 | Drilling of 100 mm dia bore 45 mtr to above |
| 447 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 125mm dia P.V.C casing pipes 00 mtr to 45mtrs |
| 448 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 125mm dia PVC (sch-80) pipe |
| 449 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:Rocky terrain with boulder formation for 300m depth |
| 450 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By DTH Rig |
| 451 | Supplying all materials , labour T and P and providing consturction of plat form as per UNICEF specifcation etc.all completes as per direction of Engineer-in-Charge |
| 452 | Supplying all materials ,labour T and P and providing fitting and fixing India Mark-II hand pump with C I Cylender and connectiong roads with providing 24.00 mtr of 32 mm dia GI raiser pipe etc. all complete as per P.H Specification and direction of Engineer-in-Charge |
| 453 | 20,000 ltr capacity R.C.C. Under ground sump of in side size (4.00m x 2.50m x 2.30m)Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 454 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 455 | Supplying all materials labour T and P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC. |
| 456 | Supplying all materials, labour, T and P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 457 | Supplying all materials, labour, T and P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 458 | Supplying all materials, labour, T and P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 459 | Supplying all materials, labour, T and P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 460 | Supplying all materials, labour, T and P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 461 | Supplying all materials, labour, T and P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 462 | Supplying all labor T and P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 463 | PH WORKS \\"E\\" TYPE QUARTERProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC pipe SDR-11 First Floor |
| 464 | Second Floor |
| 465 | 25mm dia C-PVC pipe SDR-11 Ground Floor |
| 466 | First Floor |
| 467 | Second Floor |
| 468 | 32mm dia C-PVC pipe SDR-11 First Floor |
| 469 | Second Floor |
| 470 | 40 mm dia C-PVC pipe SDR-11 top Floor |
| 471 | Supplying all materials, labour T and P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 472 | 15mm dia CP Bib cock (Con-CHR-047KN Jaquar make) |
| 473 | 15mm dia CP Long body Bib cock (Con-CHR-107KN Jaquar make) |
| 474 | 15mm dia CP two way bib cock (Jaquar)CON-041KN |
| 475 | 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565 |
| 476 | 15mm dia Basin Mixture Pillar Cock (CON-167KNB Jaquar make) |
| 477 | WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR) |
| 478 | 25mm dia brass full way valve (Shakti make) |
| 479 | 32mm dia brass full way valve (Shakti make) |
| 480 | 40mm dia brass full way valve (Shakti make) |
| 481 | 15mm CP Extension piece |
| 482 | 125mm CP grating |
| 483 | 15mm size C.P. flange |
| 484 | Supplying all materials , labour, T and P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 3rd Floor |
| 485 | supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.First Floor |
| 486 | Second Floor |
| 487 | Supplying all materials , labour, T and P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargeFirst Floor |
| 488 | Second Floor |
| 489 | Supplying all materials, labour, T and P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.First Floor |
| 490 | Second Floor |
| 491 | Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 492 | 75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 493 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 494 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 495 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 496 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 497 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 498 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 499 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 500 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 501 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 502 | 75mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make) |
| 503 | 75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 504 | 75x75x75mm U-PVC double equal door Tee(Ori Plast/Finolex/Supreme Make) |
| 505 | 75mm U-PVC vent cowl(Ori Plast/Finolex/Supreme Make) |
| 506 | Supplying all materials, labour, T and P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI p or s trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 507 | Supplying all materials, labour, T and P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) One piece commod(Hindware)ELEMENT Cat No.92084. |
| 508 | Supplying all materials, labour T and P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 509 | Supplying all materials, labour T and P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 510 | Supplying all materials, labour, T and P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mm x 600mm long CP towel rail |
| 511 | CP towel Ring |
| 512 | Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 513 | Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600 x 125mm plate glass shelf with CP guard rails |
| 514 | Supplying all materials, labour, T and P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror |
| 515 | Supplying all materials labor T and P and Fitting and fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.15mm CP revolving shower (Jaquar)CON-CHR-209KN |
| 516 | Supplying all materials, labour, T and P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24 x 18 x 10 sink(Parryware make) (Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) |
| 517 | Supplying all materials , labour, T and P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 518 | Supplying all materials , labour, T and P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 519 | Supplying all materials, labour, T and P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeFirst Floor |
| 520 | Second Floor |
| 521 | Supplying all materials labour & laying the waterproofing material of Dr. fixit torch shield P3160(3mm) with its primer 2 coats or equivalent water proofing materials after drying cleaning the concrete surface over the concrete floor/roof/balcony/ sunken and dado upto1'6\\" in wall including cleaning, applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to worksite etc. all complete as per the direction of the Engineer- in- charge. |
| 522 | Supplying all materials, labour, T and P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeFirst Floor |
| 523 | Second Floor |
| 524 | Supplying all materials, labour, T and P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx60cmFirst Floor |
| 525 | Second Floor = (Qnty same as FF) |
| 526 | Supplying all materials,labour,T and P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.First Floor |
| 527 | Second Floor |
| 528 | Supplying all materials, labour, T and P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx30cm First Floor |
| 529 | Second Floor =(Qnty same as FF) |
| 530 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 531 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge |
| 532 | Supplying all materials, labour, T and P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge110mm dia u-pvc pipe alround concrete |
| 533 | Supplying all materials ,labour ,T and P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18 dia RCC MH cover |
| 534 | Supplying all materials labor T and P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18 dia RCC Cover ) |
| 535 | Supplying all materials labour T and P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 536 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 537 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 538 | Supplying all materials labor T and P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 539 | Supplying all materials, labor T and P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 540 | Supplying all materials, labour, T and P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 541 | Supplying all materials, labour, T and P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 542 | Supplying all materials, labour, T and P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 543 | Supplying all materials, labour, T and P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 544 | Supplying all materials.labour.T and P and providing brick work in foundation and plinth with 23cmx111cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 545 | Supplying all materials,labour,T and P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 546 | Supplying all materials,labour,T and P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 547 | Supplying all materials, labour, T and P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 548 | Supplying all labor T and P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 549 | 20,000 ltr capacity R.C.C. Under ground sump of in side size (4.00m x 2.50m x 2.30m)Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 550 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 551 | Supplying all materials labour T and P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC. |
| 552 | Supplying all materials, labour, T and P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 553 | Supplying all materials, labour, T and P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 554 | Supplying all materials, labour, T and P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 555 | Supplying all materials, labour, T and P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 556 | Supplying all materials, labour, T and P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 557 | Supplying all materials, labour, T and P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 558 | Supplying all labor T and P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 559 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessoriesLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only Drilling of 200mm dia bore 00 mtr to 30mtr |
| 560 | 31 mtr to 45mtr |
| 561 | Drilling of 150mm dia bore 46 mtr to above |
| 562 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes 00 mtr to 45 mtrs |
| 563 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 200mm dia PVC (sch-80) pipe |
| 564 | Supplying all materials, labour, T and P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 565 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 566 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: Rocky terrain with boulder formation for 300m depth |
| 567 | Supplying all materials, labour, T and P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 568 | DOL Control panel |
| 569 | 40mm dia steel short piece |
| 570 | Well cap |
| 571 | 50mm size CI bracket |
| 572 | 2.50sqmm flat cable |
| 573 | 20mm dia rigid UPVC pipes |
| 574 | Steel rope with cover |
| 575 | Labour charges for lowering including transportation |
| 576 | Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender