Tender For Nursing Hostel At Diphu Accf Hospital
Tender Value
1.25 Crore
Estimated cost
Bid Submission
19 Aug 2026
18 days left
EMD
4 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nursing Hostel At Diphu Accf Hospital
BOQ
| Sl. No. | Item Description |
| 1 | Nursing Hostel at Diphu ACCF Cancer Hospital ESTIMATE FOR NURSING HOSTEL AT DIPHU CANCER CENTRE FOR NURSING STAFF AND NURSING STUDENT Sr No Description Unit Quantity Basic Rate GST Amount A CIVIL WORKS |
| 2 | DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 2.1 0.0 |
| 3 | MORTARS Cement mortar 1:2 (1 cement : 2 coarse sand) Cum 2.1 0.0 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. IN Cement mortar Cum 92.38 0.0 |
| 4 | DISMANTLING OF DOORS, WINDOWS & CLERESTOTY WINDOW (STEEL OR WOOD) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres Each 18.9 0.0 |
| 5 | REPAIRING WORKS Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand Sqm 238.53 0.0 |
| 6 | MASONRY WORK Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 67.96 0.0 |
| 7 | REINFORCED CEMENT CONCRETE CAST IN SITU Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 6.81 0.0 |
| 8 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 44.65 0.0 |
| 9 | STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 3265.77 0.0 |
| 10 | FINISHING CEMENT PLASTER (IN FINE SAND) 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) sqm 1048.0 0.0 |
| 11 | PUTTY AND PRIMER WORK Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastere wall surface to prepare the surface even and smooth complete. sqm 4646.31 0.0 |
| 12 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 4646.31 0.0 |
| 13 | INTERNAL PAINTING Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete Sqm 3543.94 0.0 |
| 14 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats sqm 3165.24 0.0 |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work Sqm 570.98 0.0 |
| 16 | EXTERIOR PAINTING Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm Sqm 1481.0 0.0 |
| 17 | FLUSH DOOR & ACCESSORIES Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on bothfaces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 55.46 0.0 |
| 18 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On both side sqm 55.46 0.0 |
| 19 | Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) |
| 20 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessaryscrews etc. complete. |
| 21 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm each 95.0 0.0 |
| 22 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm each 87.0 0.0 |
| 23 | WATERPROOFING Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. Sqm 997.82 0.0 |
| 24 | ALUMINIUM WORK Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm Sqm 295.56 0.0 |
| 25 | WOOD WORK Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Cum 1.53 0.0 |
| 26 | VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet forplacing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm sqm 201.47 0.0 RCC RAMP OR ROAD CONNECTION WITH HOSTEL |
| 27 | Earth Work Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 28 | Back Filling/ Filling Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 12.76 0.0 |
| 29 | Soling Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand Cum 2.52 0.0 |
| 30 | PCC Works Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 0.95 0.0 |
| 31 | RCC Works Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 32 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources |
| 33 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources Cum 4.23 0.0 |
| 34 | Formwork (Shuttering) Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Sqm 47.38 0.0 |
| 35 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. SUB TOTAL CIVIL WORKS B MEP WORKS B.01 ELECTRICAL WORK |
| 36 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single-core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 37 | Wiring for power plug with 2x4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 38 | Wiring for circuit/ submain wiring, along with an earth wire, with the following sizes of FRLS PVC-insulated copper conductor, single-core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire ( Socket -6A) Mtr 6680.0 0.0 |
| 39 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 40 | 1 or 2 Module (75mmX75mm) |
| 41 | 6 Module (200mmX75mm) |
| 42 | 3 Module (100mmX75mm) - For Socket outlet. |
| 43 | 4 Module (125mmX75mm) |
| 44 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 45 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 46 | 3 pin 5/6 A socket outlet |
| 47 | 6 pin 15/16 A socket outlet |
| 48 | Supplying and fixing modular blanking plate on the existing modular plate &switch box excluding modular plate as required. |
| 49 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 50 | Supply , Installation of exhaust fan in the existing opening, including making goodthe damage, connection, testing, commissioning etc. as required.(Upto 450 mm sweep ) |
| 51 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing 8 way (4 + 24), Double door Each 3.0 0.0 |
| 52 | Supplying and fixing 5A to 32 A rating 240/415V, 10kA, \\"C\\" Curve MCB in existing MCB DB complete with Connections, testing and commissioning Single pole Each 72.0 0.0 |
| 53 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Each 3.0 0.0 |
| 54 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Each 9.0 0.0 |
| 55 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required For 8 way, Double door TPN MCBDB Each 3.0 0.0 |
| 56 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 2882 Each 48.0 0.0 |
| 57 | LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt) Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5°C to 40°C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI ≥80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) |
| 58 | 8-10W- Recess Type |
| 59 | 18W- Recess Type |
| 60 | 40W Tube light -Recess Type |
| 61 | Supply laying termination and commissioning of following size aluminium armoured cable with gland lugs and other assc. 4C x 25 sq mm XLPE Armoured AL cable Mtr 442.0 0.0 |
| 62 | Supply, installation testing and commissioning of 40W LED weatherproof wall mounted light fitting, die cast aluminium housing, IP65 protection, 6500K, minimum 100lm/W efficiency, complete with LED driver, mounting asccessories, hardware, 3CX1.5 sq mm FRLS PVC Insulated copper cable, in suitable MS conduit with all fittings connections and all necessary accessories required. Total Electrical Work B.02 CCTV |
| 63 | Supply, installation testing commissioning of 4MP IP Bullet Camera, PoE enabled, IR night vision upto 30m, IP67 weather proof, complete with mounting accessories |
| 64 | Supply, installation testing commissioning of 4MP IP Dome Camera, PoE enabled, IR night vision upto 30m, vandal resistant complete with mounting accessories |
| 65 | Supply, installation testing commissioning of 8 channel NVR complete wiith 4TB Survilience HDD, power supply and all necessary accessories |
| 66 | Supply, installation testing commissioning of 24-inch Full HD LED monitor complete with HDMI cable and accessories |
| 67 | Supply , laying, termination, testing and commissioning ofCAT-6 UTPCable in PVC conduit/trunking, including RJ 45 Connectorsand all accessories, complete as required |
| 68 | Supply , laying, splicing, testing and commissioning of 6 core single mode optical fiber Cable in PVC complete with terimination and all accessories, complete as required. |
| 69 | Supply, Installation, Testing & Commissioning of Rack(9U). Total CCTV Work B.03 PHE |
| 70 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flushbend, overflow arrangement with specials of standard make and mosquitoproof coupling of approved municipal design complete, including painting offittings and brackets, cutting and making good the walls and floorswherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 71 | Providing and fixing wash basin with CI brackets, 15mm CP brass pillartaps, 32mm CP brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls where ever require White Vitreous China Wash basin size 630x450mm with a single 15mm CPbrass pillar tap. Set 21.0 0.0 |
| 72 | Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink asper IS: 13983 with CI brackets and stainless steel waste with plug 40mmincluding painting of fittings and brackets, cutting and making good thewalls wherever required. Kitchen sink without drain board 510x1040 mm bowl depth 225 mm Set 2.0 0.0 |
| 73 | Providing & fixing PVC waste pipe for sink including PVC waste fittingComplete |
| 74 | 32mm Dia - Flexible Pipe |
| 75 | 40MM dia - Flexible Pipe |
| 76 | Providing and fixing toilet paper holder : C.P. brass |
| 77 | Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved qualityand colour, weighing not less than 105 gms. |
| 78 | Supplying, installation, testing And commissioning of following heavy duty CP brass fittings of approved make, complete with all accessories, fittings hardware,screws, wall plugs, and making good the disturb surface, as directed by Engineer-In-charge |
| 79 | 2 way bib cock |
| 80 | Health Faucet |
| 81 | Basin Mixture |
| 82 | Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than88 gms |
| 83 | Wall Mixture ( Hot & Cold ) |
| 84 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 85 | Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittings arrangement ofapproved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 86 | Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore |
| 87 | Providing and fixing C.P. brass long body bib cock of approvedconforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 88 | SS grating 125mm dia |
| 89 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes havingthermal stability for hot & cold water supply, including all CPVC plain &brass threaded fitting including fixing the pipewith clampsat 1 m spacingbrass threaded fitting, including fixing the pipewith clampsat 1 m spacing.This includesjointing of pipes &fittingwith one step CPVC solvent cementand cost ofcutting chases and making good the same including testingofjoints complete as per direction of Engineer in Charge.(Concealed workincluding cutting chases and making good the walls etc.) |
| 90 | 32mm nominal outer dia. Pipes. |
| 91 | 15mm nominal outer dia. Pipes. |
| 92 | Providing and fixing uPVC pipes for soil and waste drainageincluding all fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittingswith solvent cement and testing of joints completeas per direction of Engineer in Charge. |
| 93 | 110mm |
| 94 | Providing and fixing of following sizes of Brass ball valve with all fittings |
| 95 | 32 mm |
| 96 | Supplying, placing, fixing, testing and commissioning of HDPE water storage tank( Sintex or equivelent approved make) triple layer construction, suitable for portable water storage, complete with inlet, outlet, overflow, drain, vent with mosquito- proof screen, locable lid, all necessary fittings,supports, accessories and making all connections complete as per manufacturer's specification and direction of the engineer incharge. 5000L HDPE Water storage tank Nos. 4.0 0.0 |
| 97 | WATER COOLER: 40 LTR Total without GST 0.0 Note :- Materials as per CPWD approved make. Total with GST 0.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender