Tender For Beautification Of 2 Nos. Of Pond At St. Pauls School Complex, Dropgate / Sh: Development & Construction Of 1No Pond Under annual maintenance contract Ward No.40.
Tender Value
1.45 Crore
Estimated cost
Bid Submission
06 Aug 2026
7 days left
EMD
2.91 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification Of 2 Nos. Of Pond At St. Pauls School Complex, Dropgate / Sh: Development & Construction Of 1No Pond Under annual maintenance contract Ward No.40.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for StructuresWith dewatering.Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.Ordinary SoilUpto 3 m depth |
| 2 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5. |
| 3 | Turfing with SodsFurnishing and laying of the live sods of perennial turf orming grass on embankment slope , verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per MoRT&H Technical Specification clauses of section 300. |
| 4 | Sand FillingFilling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200.Sand filling |
| 5 | Providing concrete for plain/reinforced concrete in open foundations complete including or work as per drawings &MoRD technical specifications Clauses 802, 803, 900, 1202 and1203 (including centering, shuttering, staging etc. but excluding reinforcement). P.C.C grade M 10 (i) Nominal mix 1:3:6 |
| 6 | Providing concrete for plain/reinforced concrete in open foundations complete including formwork as perdrawings &MoRD technical specifications Clauses 802, 803, 900, 1202 and1203 (including centering, shuttering, staging etc. but excluding reinforcement).P.C.C grade M 20(i) Nominal mix (1:2:4) |
| 7 | Providing concrete for plain/reinforced concrete in open foundations complete including formwork as perdrawings &MoRD technical specifications Clauses 802, 803, 900, 1202 and1203 (including centering, shuttering, staging etc. but excluding reinforcement).R.C.C grade M-20 |
| 8 | Providing & laying reinforced cement concrete in superstructure as per drawings & MoRD technical specifications Clauses 800, 900, 1205.4 & 1205.5 (including centering, shuttering, staging etc.but excluding reinforcement)I. R.C.C grade M 20(i) For nominal mix 1:2:4 |
| 9 | Supplying, fitting&placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings &MoRD technical specifications Clauses 1000 & 1202. |
| 10 | Supplying, fitting, & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in superstructure complete as per drawing & MoRD technical specifications clauses 1002, 1010 & 1202 |
| 11 | Brick masonry work in cement mortar in Foundation completed excluding pointing & plastering as per drawing & MoRD technical specifications Clauses 600, 1202 & 1203.i) Brick masonry in 1:4 cement mortar |
| 12 | Brick masonry work in cement mortar in sub structure completed excepting pointing & plastering as per drawing & MoRD technical specifications Clauses 602, 603, 604, 1202 and 1204i) Brick masonry in 1:4 cement mortar |
| 13 | Plastering with cement mortar (1:4) 12 mm thick on brickwork/ C.C. work including a finishing coat of neat cement punning with 2.75 kg of cement per sqm in substructure as per MoRD technical specification Clauses613.4 & 1204. |
| 14 | Providing weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7. |
| 15 | Providing & laying filter media with jhama brick aggregates as per specification to a thickness of not lesst han 600mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height,compacted to firm condition complete as per drawing and MoRD technical specification clause 1204.3.8. |
| 16 | Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to givehigh gloss finish etc. complete at all levels:7.2.1. 18 mm thick Rajnagar Plain white marble/ Udaipur greenmarble/ Zebra blackmarble or equivalent duly approved7.2.1.1. Area of slab over 0.50 sqm |
| 17 | Providing and fixing Precast chequered cement concrete tiles18mm thick, laid in footpath & courtyard, on 20mm thick bed of cement mortar 1:4 (1cement :4fine sand) jointed with neat cement slurry including rubbingand cleaning etc. all complete as per direction ofEngineer-in-charge.10.54.1 In dark shade using ordinary cement |
| 18 | Providing and fixing tactiles of standardized designs conforming to RNIB (The Royal National Institute for the Blind, UK), DETR (Department of the Environment, Transport and the Regions, UK) & ADA (Americans with Disabilities Act, USA) of size 300 x 300 mm in floors, (thickness to be specified by the manufacturer) speciallydesigned to assist the visually impaired- “foot braille”, with water absorption less than 0.5%, of approved brand & manufacturer, laid on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) including grouting of joints etc. all complete as per direction of Engineer-in charge. (Payment for grouting of joints to be made separately) |
| 19 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 20 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete inposition to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-Charge (length of finished kerb edging shall be measured for payment). (Precast c.c. kerb stone shall be approved by Engineer-in Charge) |
| 21 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :12.41.1 New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:12.59.1 Two or more coats on new work |
| 23 | Flat brick solingProviding and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender