Tender For Providing Speed Breaker Pedestrian Crossing And Other Road Safety Measures In Sanvordem Constituency.
Tender Value
11.95 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
7 days left
EMD
23917
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Speed Breaker Pedestrian Crossing And Other Road Safety Measures In Sanvordem Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Providing speed breaker having trapezoidal section with flat top surface, as per IRC-99 2018, for general traffic at preferred crossing speed of 15-25km/hour comprising of Bituminous concrete(hotmix) 30mm thick over a layer of Bituminous Macadam (hotmix) 70mm thick, by intending the surface and applying tack coat as per MORTH specification and finishing the slopes on either side to requisite gradient as per direction of Engineer in charge complete. |
| 2 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803. |
| 3 | Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973) |
| 4 | Providing and laying of hot applied thermoplastic compound rumbler strips in two layers 2.5 mm thick each, top layer with reflectorising glass beads @ 250 gms per sqm area, total thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 5 | Providing & erection of 30watts solar panel (12VDC) Amber (Orange)Ccolor Polycarbonate lamp (300mm dia) Blinkers of 24 hrs backup on bridge including excavation & concreting in CC 1 :2:4, as per the direction of engineer-in-charge in all respects. |
| 6 | Cutting bituminous road and making good the same including supply of extra quantities of aggregate, murrum grit and bitumen required (bitumen shall be straight run bitumen 80/100 or with such bituminous material of grade and type as specified by the Engineer-in-charge)including supplying of bitumen. |
| 7 | Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 2012 made of high intensity Grade sheeting using ASTM sheeting \\"C' type XI micro prismatic retro reflective material vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)etc complete as per MORT &H Specifications Fifth Edition. A 10 years warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor.a) 60 cm equilateral triangle Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender