Tender For Name Of Work: Fabrication And Installation Of Gauge Post, Mtbm & Target Poles At Various Sites Under Lower Yamuna Division, Cwc, Agra.
Tender Value
9.96 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
6 days left
EMD
19937
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work: Fabrication And Installation Of Gauge Post, Mtbm & Target Poles At Various Sites Under Lower Yamuna Division, Cwc, Agra.
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication and Installation of Gauge Post, MTBM & Target Poles at various sites under Lower Yamuna Division, CWC, Agra. |
| 2 | Fabrication and Installation of Gauge Posts at river banks including cost of civil works in foundation embedded in 1:2:4 reinforced cement concrete pedestal block of size 60 cm x 60 cm x 60 cm including the cost of steel reinforcement, centering, shuttering, finishing, reinforcement over the 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cement concrete base of size 80 cm x 80 cm x 15 cm with 12 mm thick plastering complete and marking the gauge with synthetic enamel with standard metric gradation of 5 mm thickness in black & white alternately & red synthetic enamel of 5 mm width at every 100 mm etc. complete (excluding retro reflective paints) Reinforced Cement Concrete gauge post of size 15 cm x 10 cm (one side tapered in 5 cm length) made with 1:2:4 concrete mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)-1.80 m long. (rates excluding retro reflective paints) |
| 3 | Establishment of different types of bench mark of standard specifications including its painting, engraving etc. complete including cost of manpower, material, labour, etc, as per directions of engineer-in-charge: Musto Type Benchmark (MTBM) madeoverall Size (Plan): 1500 mm x 1500 mm, Height (Section) 1650 mm (900 mm below ground level + 750 mm above), Wall Thickness: 250 mm (brick masonry with plaster on both sides),40 mm stone aggregate filled inside the chamber, Jamuna Sand or Equivalent using an 8 mm thick MS plate with J-type anchors welded to it, supported over a 1:2:4 RCC (M15) structure resting on a 1:4:8 PCC (M7.5) base. The unit is provided with a 75 mm diameter PVC pipe through the pedestal for protection. It includes 4 numbers of 12 mm diameter reinforcement bars. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: foundation, footings, bases for column. |
| 6 | Providing & laying in position cement concrete of specified grade excluding the cost of centering & shuttering. All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregated 40 mm nominal size. |
| 7 | 12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand). |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender