Tender For E- Tender For The Year 2025-2026 - Proposed Additional First Floor Building For Cantonment Board Secondary School At Chinna Vandisolai, Wellington
Tender Value
40 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
17 days left
EMD
40000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E- Tender For The Year 2025-2026 - Proposed Additional First Floor Building For Cantonment Board Secondary School At Chinna Vandisolai, Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Plain Cement concrete 1:4:8 type C1 using 40mm graded aggregate |
| 2 | R.C.C 1:2:4 using 20mm graded aggregate columns |
| 3 | R.C.C 1:2:4 using 20mm graded aggregate beams |
| 4 | Reinforced Cement concrete in roof slab |
| 5 | Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hopping ends and binding with and including MS wire not less than 0.9mm dia. |
| 6 | Form work sides of concrete surfaces in Columns |
| 7 | Form work sides of concrete surfaces in Beams |
| 8 | Form work to soffits of suspended slab such as roof slab not exceeding 250mm thick |
| 9 | Brickwork in cm using first class brick 1:6 incl curing etc., completed |
| 10 | M&L Colored Glazed Ceramic tiles 350X250X7mm thick as on vertical surfaces such as skirting including 10mm thick backing coat with CM 1:4 |
| 11 | Rendering in cement mortar 1:6, 15mm thick on fair faces of walls |
| 12 | Ceiling plastering with cm 1:3, 15mm thick of roof slab |
| 13 | Plain cement concrete 1:2:4 type C1 using 20mm graded stone aggregate as in bed block |
| 14 | Screed bed or bedding layer of 1:4 motor 15mm thick for laying floor finishes |
| 15 | Steel doors complete including protection type hings etc., with glazing bars |
| 16 | White washing on wall surface three coats including preparation of surface |
| 17 | White washing on Ceiling surface three coats including preparation of surface |
| 18 | Preparing newly plastered wall surface and applying two coats of cement based paint over a coat of primer |
| 19 | Preparing steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 20 | Supplying and fixing of SS handrails |
| 21 | Providing fabricating and fixing performated MS sheet panel of 2.0 mm thickness with staggered circular performations of approved pattern, powder coated in Anthracite grey (RAL 7016) with minimum 60-80 micron coating, including MS supporting frame work of 40x40x2 mm square tube, necessary MS brackets, SS 304 self-drilling screws/rivets, welding, grinding, primer, touch-up painting, all fixyures, fasteners, transportation, labour scaffoding and complete installation. |
| 22 | Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed multistranded 1100 Volts grade copper conductor cable through and including non metallic PVC conduit on ceiling/surface of the wall along with 1.0 sqmm PVC insulated copper conductor as earth continuity conductor and connecting it to the common earth dolly including sunk cast iron/pressed steel/terminal boxes for mounting switches/sockets etc with 3.0 mm thick laminated sheet covers all as specified and directed for :- |
| 23 | (a) One light point controlled by one switch. |
| 24 | (b) One switch socket combination oulet 5 Amps multi pin on independent board. |
| 25 | All as per item No.1 above but with 4 sqmm copper stranded cable for One switch socket combination outlet 15 Amps (Multi pin type) independent all as specified and as directed. |
| 26 | Supply and fixing ceilling rose surface bakelite 65x50mm, three terminals all as specified and as directed. |
| 27 | Supply and fixing switch flush type 5 Amps, 230 volt, single pole, one way all as specified and as directed. |
| 28 | Supply and fixing 230 volt, multi pin 5 Amps flush type switch socket combination out let all as specified and as directed. |
| 29 | Supply and fixing switch socket combination, 5 and 15 Amps, 230 volt, multi pin, flush type universal all as specified and as directed. |
| 30 | M& L for complete with GI earth plate electrode 600 x 600x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below ground level with top edge of the earth plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts, washers and GI earth wire protected by 15 mm dia GI pipe for watering funnel, Earth work PCC chamber with 40 mm thick RCC 1:2:4 type 'B' for cover slab with 6 mm dia MS bar and 100 mm both ways with MS Hook 8 mm dia all as shown in electrical plate No. 5 all as specified and as directed. |
| 31 | M & L for sub main wiring with 2 runs of single core stranded copper copper conductor 6 sqmm PVC inculated and unsheathed drawn through and including suitable size non metalic regid PVC conduit with all acessories fixed to walls, ceiling including 1 run of 4.00sqmm copper ( Insulated) cable as earth contiunity xonductor including taking down existing unserviceable sub main wiring all as specified and as directed. Note: Two runs of conductor and one run of earth wire and one run of PVC conduit shall be measured as one unit. |
| 32 | Supply and fixing double door MCB distribution board in sheet metal enclosureSPN 8 way with 200 Amps, 240 Volt rated bus bar neutral and earth connected bars for use of MCB’s fixed properly at directed place by using suitable required fixing arrangement |
| 33 | Supply and fixing double door MCB distribution board in sheet metal enclosure TPN 4 way with 200 Amps, 415 Volt rated bus bar neutral and earth connected bars for use of MCB’s fixed properly at directed place by using suitable required fixing arrangement |
| 34 | Supply and fixing RCB SPN 16Amps, 30mA breaking capacity, 240Volt AC all as specified and as directed. |
| 35 | Supply and fixing RCCB TPN 40Amps, 30mA breaking capacity, 415Volt AC all as specified and as directed. |
| 36 | Supply and fixing MCB SP 6/ 32Amps, 10KA rupturing capacity, 240Volt AC all as specified and as directed. |
| 37 | Supply & Connecting Tamper proof Electronic Energy Meters three phase 240 V, AC , 50 HZ, ISI marked Class I, LCD type 30 to 60 Amps capcity, including making seal of MES afater removing the old unserviceable meters all as specified and as directed. (Make : L & T or Equivalent) |
| 38 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. → |
| 39 | Supply and fixing LED light fitting 1x8 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. |
| 40 | Supply and fixing LED light fitting 1x40 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender