Tender For Provn Of Fencing And Gate For Various Swts In Domestic Area At Af Stn Nal Under Ge (Af) Nal
Tender Value
4.84 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
17 days left
EMD
10000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Fencing And Gate For Various Swts In Domestic Area At Af Stn Nal Under Ge (Af) Nal
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 2 | Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed. |
| 3 | Material and labour, Plain Cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, footing, post hole and mass concrete, complete all as specified and directed. |
| 4 | Supply and fix mild steel work as in angle Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 and similar work conforming to Fe-410-0 , complete all as specified and directed. |
| 5 | Supply and fix mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 6 | S & F Galvanised steel wire netting of 1.40mm dia and mesh size 20mm as in complete all as specified and as directed by the Engineer-in-Charge |
| 7 | Supply and fix Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending to chain link fencing and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ,quality Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde E-165) complete all as specified and directed. |
| 8 | Supply and fix mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut but length of bolt exc. 5cm and n. exc. 10cm long and bolt one side embedded in mild steel angle etc complete to fix fencing wire dia of shank11to15mm complete all as specified and directed. |
| 9 | Supply only MS galvanised chain link fencing any type (Weight not more than 4 Kg/Sqm) size as directed complete all as specified and as directed. |
| 10 | Fixing only Chain link fencing including line wires, any mesh, size and type to any standards, rails straining bolts, etc. including provision of binding wire. complete all as specified and as directed. |
| 11 | Supply and Fixing for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 12 | Material and Labour for painting new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and directed. Note:- Painting on steel work to be done before execution |
| 13 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 14 | M&L for removing excavated soils n exc 50m and depositing where directed at a level n exc 1.50m above the starting point complete all as specified and directed by Engineer-in-Charge |
| 15 | M&L for PCC 1:4:8 type D2 40mm graded aggregate as in foundations, filling mass concrete complete all as specified and directed. |
| 16 | M&L for Machine pressed rubber moulded coloured precast concerte interlocking paver block any shape and size over 25 mm thick sand layer conforming to IS 15658-2006 of 60 mm thickness grade M-40 with grey cement and no pigments complete all as specified and directed. |
| 17 | M&L for cement concrete type B2 (1:2:4) using 20mm graded stone aggregate as in coping/paving complete all as specified and directed. M&L for disconnecting from the existing location cutting off worn out aluminium cable end and Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking out existing cable of any size. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender