Defence Statutory Bodies & Commissions/Committees Closing in 1 days TDR #56715304

Tender For Special Repair Work Of Boundary Wall Alongwith Angle And Wire Fence At Aro Bareilly And Certain Other Misc Works Under Ge (West) Bareilly.

Issued by Statutory Bodies & Commissions/Committees · Bareilly, Uttar Pradesh
Tender Value
47.15 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
94500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair Work Of Boundary Wall Alongwith Angle And Wire Fence At Aro Bareilly And Certain Other Misc Works Under Ge (West) Bareilly.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 11-Aug-2026 Amendment in BOQ BOQ 24-Aug-2026
2 11-Aug-2026 Amendment in critical dates Date 24-Aug-2026

BOQ

Name of Work:- SPECIAL REPAIR WORK OF BOUNDARY WALL ALONGWITH ANGLE AND WIRE FENCE AT ARO BAREILLY AND CERTAIN OTHER MISC WORKS UNDER GE (WEST) BAREILLY.
Sl. No. Item Description
1Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed
2M&L Brickwork old size with subclass ‘B’ bricks, except brick straight or curved on plan exc 6m mean radius built in in CM (1:6) all as spd and directed
3M&L Brick work with fly ash bricks ,old size brick straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and directed
4M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) all as spd and directed
5Taking down cement plaster from wall of any description including terrazzo tiles, skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.all as specified and directed.
6M&L 12mm thick cement plaster on brick surfaces or concrete surfaces in cm 1:4 cement including finishing the surface even and smooth without using extra cement all as spd and directed
7M&L 12mm thick cement plaster on brick surfaces or concrete surfaces in cm 1:4 on other than fair face finished even and smooth without using extra cement complete all as spd and directed
8M&L for prepration of newly plastred surfaces of wall and applying two coat of cement base paint over and including two coat of wall care putty complete all as specified and directed.
9M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish new wall surfaces over and including two coat of wall care putty complete all as specified and directed.
10M & L applying two coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces by washing rubbing down and stoping of old wall surfaces complete all as specified.
11Excavation in trenches in soft/loose soil not exceeding 0.5m depth and n.exc 1.5m width for foundation etc and getting out complete all as specified and directed
12Removing excavated material (soil) to a distance not exceeding 50m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and directed
13Returning filling in soft/loose soil in trenches after laying pipes, construction of manholes etc including spreading, leveling and watering and well ramming in 25cm thick layers complete all as specified and directed
14M&L for PCC 1:4:8 type D-2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed
15Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
16M & L formwork to sides and soffits of lintels,lintel bend, beams etc flat surface finished rough finished of concrete complete all as specified and directed
17M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete ccomplete all as specified and directed.
18S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
19S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed.
20M& L M-25 Design Mixed foundation, including raft footings, foundation beams, plinth beams,bases for column etc.basement slabs, under reamed piles and mass concrete complete all as specified and directed
21M & L for M-25 Design Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level complete all as specified and directed
22Demolition of cement concrete (unrinforced), in ground floor and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.
23M&L for Machine pressed coloured precast conctete interlocking paver block with gray cement and pigment or selected coloured or pattern any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over and including M&L for 25mm thick sand cushioning including spreading and levelling complete all specified and directed.
24M&L providing cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in benching, coping, filling, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed
25S&F Framed work as gates of angle or other section with gusset plates, rails, braces,Y neck for fixing wire etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completand similar work conforming to Fe 290 Gde E-165 complete all as specified and directed
26M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.
27S&F razor wire 2.24mm dia with 20mm wide and 0.50mm thick razor strip fixed with clamps in rows and angle iron bracket/frame over boundary wall etc complete all as specified and directed by Engre in charge (Note : Each Razor wire and angle iron frame/bracket shall be measured and paid separetely.)
28S& F diamond shape hight strength steel punched tape concertina coil 600mm dia (in specific stretched posion) hot dip galvanised coated with CLR anti corrosive paint by making diamond shape with the help of dove tail clips (18 SWG) fixed over razor with the help of hog rings (14 SWG) in angle iron bracket/frame over boundry wall etc complete all as specificed and directed. (Note : Razor wire and angle iron frame/bracket shall be measured and paid separetely.)
29M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) on newly surface even and smooth without using extra cement complete all as spd and directed
30M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) on newly surface other than fair faces even and smooth without using extra cement acomplete all as specified and directed
31M&L two coats of cement base paint on new plastered wall surfaces over a coat of primer and two coat of wall care putty of any description including preparation of surfaces, complete all as specified and directed
32M& L RCC M-20 Nominal mixed foundation, including raft footings, foundation beams, plinth beams,bases for column etc.basement slabs, under reamed piles and mass concrete complete all as specified and directed
33M & L for RCC M-20 Nominal mixed for Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level complete all as specified and directed
34S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut toordinary lengths indicated posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed
35M&L for framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plates, rails, braces, including pintal etc. complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed
36Demolition of cement concrete (unrinforced), in ground floor and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.
37M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over and including M&L for 25mm thick and 75mm thick PCC 1:4:8 sand cushioning including watering and consolidation complete all specified and directed.
38Surface excavation in soft/loose soil not exc 30 cm deep and average 15cm deep and getting out complete all as specified and directed
39M&L for framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plates, rails, braces, including pintal etc. complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed
40S& F MS Steel rolling shutters 1.25mm thick , with ball bearing, as specified including top cover, an choring rod, hasp and staple and one coat of primer; erected in position as indi cated, complete: but gear operated type with bevel gear box and crak handle including 2x Safety lever locks mild steel with 4 levers for rolling shutters , Ball bearing of requisite numbers, springs, holding pipes for rolling shutters and incluing two coat of synthtic enamel paint . All fittings, locks, bearing, springs, pipes and channels and strips should be approved from Eingr -in- Charge before fixing. Please note material shoulb be used used heavy duty and medium gauge for said rolling shutters. Making holes, demolition RCC/PCC work and making good surface are inclusive in the above rates complete all as specified and directed.
41M&L for RCC1:2:4 Nominal Mixed type B1 (20 mm graded aggregate) for Chajjas, slab etc including necessary form work complete all as specified and directed.
42M&L cement concrete 40mm thick type B-0, 1:2:4 (12.50mm graded aggregate) as in floor complete all as specified and directed.
43M & L for 18mm-20 mm thick machine cut pre polished kota stone slab flooring laid under stairs soffits area and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and including M&L for 20 mm thick bedding layer of cement mortar 1:4 for laying floor finishes even and rough with and including cement mortar bedding complete all as specified and directed.
44M&L for (400mmx400)mm ( 10mm to 12 mm thick ) out door vetrified designer anti skid coloured tiles including designer borders tiles (Square/ rectangular) in floors/path/hard standing etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including M&L for 15mm thick screed bed in cm-1:6 all as spd & as directed.complete all as specified and directed.
45M&L for Machine pressed precast conctete interlocking paver block with colored cement and pigment (colour/pattern approved by GE) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade over and including M&L for 25mm thick sand cushioning including watering and consolidationsurface complete all specified and directed.
46M&L rendering 12mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces complete all as specified.
47M&L preparation and necessary cleaning of surface free from dust ,loose paint etc by skilled labour and applying two cement base paint on wall complete all as specified and directed.
48S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.
49S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed
50S & F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position including 20mm vakall as specified in SSR Part I complete all as specified and directed
51S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified or as directed.
52S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and as directed.
53S&F 110mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door
54S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed.
55S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed.
56S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.
57S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.
58M&L for 150mm dia SWG pipe grade ‘A’ conforming to IS-651-1972 laid in trenches and jointed in CM 1:1 complete all as specified and directed.
59M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed of drain pipe including packing under and hunching against the sides of pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed.
60Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56715304
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.15 Lakhs
LAST DATE 24-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair Work Of Boundary Wall Alongwith Angle And Wire Fence At Aro Bareilly And Certain Other Misc Works Under Ge (West) Bareilly.
Basic Detail
Tender No 8397/C/E8
Bidding Type Tender
Location
City Bareilly
State Uttar Pradesh
Key Dates
Publish Date 11 Aug 2026
Submission Date 24 Aug 2026
Open Date 01 Jan 0001
Finance
Tender Value 47.15 Lakhs
Tender Fee 500
EMD 94500
Exemption Available
Document List
BOQ_875225.xls
c754a7e7-4481-46ac-ba6f-57ba76c6e4a3.html
COMPLETETENDER8397.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 24, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Aug 24, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Aug 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
xls

BOQ_875225.xls

html

c754a7e7-4481-46ac-ba6f-57ba76c6e4a3.html

pdf

COMPLETETENDER8397.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders