Tender For Special Repairs To Bldg No. T-42 B And Allied Services At installation Chilka
Tender Value
3.18 Crore
Estimated cost
Bid Submission
25 Aug 2026
24 days left
EMD
3.93 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No. T-42 B And Allied Services At installation Chilka
BOQ
| Sl. No. | Item Description |
| 1 | M&L for priming and applying heavy treatment (for severe conditions) for water proofing roof treatment, applying APP based polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side and end overlaps of minimum 100 mm Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc. and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m(area of flashings, etc., shall be added to the roof area), and one coat of aluminium paint on top, including sealing all joints by thermo fusion, including rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:3 with WPC @ 200ml per 50 kg by weight of cement content complete including Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100m all as specified and directed.Note :- Water proofing compound will be measured and paid separately. |
| 2 | S&F 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections complete all as specified and as directed. |
| 3 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections complete all as specified and as directed. |
| 4 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforced cut as required to facitade demolition) complete all as specified and directed. |
| 5 | M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required incl cranking bending for hoping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 6 | M&L RCC nominal mix type B-1(1:2:4) 20mm graded aggregate as in chajjas complete all as specified and directed. |
| 7 | M&L for RCC (nomial mix) type B1 1:2:4 with using 20mm graded stone agg )as in Parapet Walls, retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed. |
| 8 | M&L for Formwork to flat rough finished surface of concrete to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter all as specified and directed. |
| 9 | M&L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finish surfaces all as specified and directed. |
| 10 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing to give high gloss finish complete including Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar all as specified and as directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 12 | M&L Marble \\"white/Green\\" work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like incement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15 mm thick screed bed in CM 1:4 including mirror polishing to give high gloss finishcomplete all as specified and as directed. |
| 13 | M&L 18 to 20 mm thick Granite stone in steps, jambs, pillars, window cills, cooking platform, office counter set over 15 mm thick screed in CM (1:4) complete all as specified and as directedetc. in cement morter (1:4) including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite including mirror polishing on marble work where ever required to give high gloss finishcomplete all as specified and as directed. |
| 14 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick squares/rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm, in floors etc. set and joint in neat cement slurry and pointed in white or colour cement to match the tiles over 15 mm thick screed in CM (1:4) complete all as specified and as directed |
| 15 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surfaces such as skirting / dado tiles including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed. |
| 16 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick squares/rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm, in vertical surface in skirting etc set and jointed in neat cemetn slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed |
| 17 | S&F in repair PVC floor trap with grating including jointing with solvent cement to waste pipe 75 mm dia complete all as specified and as directed |
| 18 | S&F in repairs 102mm dia grating doom of fancy chromium plated complete all as specified and directed |
| 19 | S&F semi perforated 12mm thick micro tegular edged GRG false ciling tiles at all height with GRG (Glass fibre reinforced gypsum) false ceiliing tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%,humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225 : 1987 , noncombustible as per BS 476 (Part-4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides ) comprising of amin T runners of size 15x32 mm of length 3000 mm, cross T of size 15x32 of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shaped level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on priphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws including Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets. . The work shall be carried out as per specifications, drawing and as per specification and as directed. |
| 20 | M&L Old size brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:4 including Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed. |
| 21 | Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified. |
| 22 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames) all as specified. |
| 23 | Refixing of chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames) in same opening all as specified and directed. |
| 24 | Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each all as specified and directed. |
| 25 | Refixing Shutters of any description exc 1 sqm and n exc 2 sqm in same opening all as specified and directed. |
| 26 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay),heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified. |
| 27 | Cutting holes in brick walls/stone wall exceeding half brick but not exceeding one brick in cement mortar for inserting holdfasts and making good dismantled protiion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required all as specified and directed. |
| 28 | S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and as directed. |
| 29 | S&F 2nd class hard wood, factory made 35 mm thickness of plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and as directed. |
| 30 | S&F 2nd class hardwood plain, factory made 35mm thickness of shutter Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into sqares with plain ,with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass ,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed. |
| 31 | S&F medium weight, cold rolled mild steel butt hinges of 100mm size, complete all as specified and as directed. |
| 32 | S&F in repair medium weight, cold rolled mild steel butt hinges of 100 mm size, complete all as specified and as directed. |
| 33 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed. |
| 34 | S&F in repair aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed. |
| 35 | S&F extruded aluminium alloy handles, 150mm long fabricated type, anodised all as specified and as directed. |
| 36 | S&F in repair extruded aluminium alloy handles, 150mm long fabricated type, anodised all as specified and as directed. |
| 37 | S&F 300 mm long aluminium anodised, sliding door bolts, with hasp staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed |
| 38 | S&F in repair 300 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed |
| 39 | S&F 300mm MS, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 40 | S&F in repair 300mm MS, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 41 | S&F door stopper 75 mm overall length of aluminium alloy body and tongue with twin rubber shoes complete all as specified and as directed. |
| 42 | S&F Powder coated of any colour aluminum frame (minimum thickness of powdere coating 50 micron) for door/windows/ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 43 | S&F powder coated of any colour(thickness of powder coating not less than 50 micron aluminium sliding window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and as directed. (Note : Glass and wiremesh will be measured and paid seperatly.) |
| 44 | S&F Aluminium powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50X50mm (weight not less than 2 kg /Sqm) fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed. |
| 45 | S&F 4 mm thickness of sheet glass, ordinary quality and glazing with glazing strips in square n exc 0.5 sq. m in each pane all as specified and as directed. |
| 46 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed |
| 47 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed |
| 48 | Dismantling handrails of staircase railing, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if any |
| 49 | M & L for providing and fixing stainless steel tube (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 50 | S&F stainless steel handrail ball( grade 304) 50mm dia on top of stainless steel tube and fixing arrangements all as specified and as directed. |
| 51 | S&F for 25mm thick pre-formed filler ( bituminous pad) for crumple/expansion joints with Joint Sealing Compound Grade “A” (Normal) in 25/30 Kg complete all as specified and as directed. |
| 52 | S&F 0.56mm thick plain aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the places can be cut) including dismantling old plain,corrugated steel sheet, any gauge, thickness, complete all as specified and directed. |
| 53 | M&L for PCC Type B0 1:2:4 (12.5mm graded aggregate) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 54 | M&L for preparation of new painted wooden surfaces of any description not otherwise described over 10 cm width or girth of any and applying two coat of synthetic enamel paint over coat of primer of approved shade complete all as specified and directed. |
| 55 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth of any and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed. |
| 56 | Taking down eaves gutters and rainwater pipes (any size of pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre lineover fittings and accessories) complete all as specified and directed |
| 57 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 110 mm bore. |
| 58 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 75 mm bore. |
| 59 | S&F 110 bore PVC (SWR) bends with access door any radius complete all as specified and directed |
| 60 | S&F 110 bore PVC (SWR) bends any radius complete all as specified and directed |
| 61 | S&F 75 bore PVC (SWR) bends with access door any radius complete all as specified and directed |
| 62 | S&F 75 bore PVC (SWR) bends any radius complete all as specified and directed |
| 63 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site of size 15mm bore of dia complete all as specified & directed. |
| 64 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site of size 20mm bore of dia complete all as specified & directed. |
| 65 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site of size 25mm bore of dia complete all as specified & directed. |
| 66 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site of size 32mm bore of dia complete all as specified & directed. |
| 67 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site of size 40mm bore of dia complete all as specified & directed. |
| 68 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site of size 50mm bore of dia complete all as specified & directed. |
| 69 | Refixing old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) of size 25mm bore of dia complete all as specified & directed. |
| 70 | Refixing old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) of size 32mm bore of dia complete all as specified & directed. |
| 71 | Refixing old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) of size 40mm bore of dia complete all as specified & directed. |
| 72 | Refixing old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) of size 50mm bore of dia complete all as specified & directed. |
| 73 | S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 15mm bore complete all as specified & directed. |
| 74 | S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 20mm bore complete all as specified & directed. |
| 75 | S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 25mm bore complete all as specified & directed. |
| 76 | S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 32mm bore complete all as specified & directed. |
| 77 | S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 40mm bore complete all as specified & directed. |
| 78 | S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 50mm bore complete all as specified & directed. |
| 79 | S&F in repair gun-metal, globe or gate valves size of 50mm bore of dia, with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified & directed. |
| 80 | S&F in repair gun-metal, globe or gate valves size of 40mm bore of dia, with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified & directed. |
| 81 | S&F in repair gun-metal, globe or gate valves size of 25mm bore of dia, with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified & directed. |
| 82 | S&F in repair 40 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ballscrewed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed. |
| 83 | Taking down cement plaster of any description on brick or stone walls etc, including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 84 | M&L for rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and smooth (without using extra cement) complete all as specified and as directed. |
| 85 | M & L 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete curfaces mixed with water proofing compound 200ml per 50 kg weight of cement rendering finished even and fairn and smooth without using extra cement complete all as specified and directed.Note : Water proofing compound shall be measured and paid separately. |
| 86 | M&L 5 mm thick rendering in CM 1:3 on ceiling including finishing the surfaces even and smooth, without using extra cement etc complete all as specified and directed. |
| 87 | Supply only liquid water proofing compound |
| 88 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coat white wash complete all as specified and directed. |
| 89 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat oil bound distemper over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smoothcomplete all as specified and directed. |
| 90 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coat oil bound distemper on ceiling complete all as specified and directed. |
| 91 | M&L for preparation of new plastered external wall surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 92 | M&L for complete removal of existing treatment and preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and greasy spots and applying two coat oil bound distemper on ceiling complete all as specified and directed. |
| 93 | M&L for complete removal of existing treatment and preparation of external wall surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm to make the surface even and smooth complete all as specified and as directed. |
| 94 | M&L for complete removal of existing treatment and preparation old surfaces by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and greasy spots of wall and applying two coat of oil emulsion distemper of approved shade on wall over surfaces plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 95 | M&L for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat of white wash on wall complete all as specified and directed. |
| 96 | Demolition of cement concrete unreinforced in ground floors andpavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 97 | M&L for 75mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as Sub base of hard standing/pathway complete all as specified and directed |
| 98 | M&L 75mm thick PCC 1:2:4 type B2 using 40mm graded stone aggregate complete as in flooring, plinth protection all as specified and directed. |
| 99 | M & L for forming Construction joint 30mm deep x 10mm wide filled with sealing Grade 'A' (joints shall be formed with mechanical cutter) compound complete all as specified and directed. |
| 100 | M & L for dummy joints 60mm deep x 10mm wide filled with sealing Grade 'A' (joints shall be formed with mechanical cutter) compound complete all as specified and directed. |
| 101 | Finishing surface of concrete roads, pavements, by brooming when the concrete is green. |
| 102 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed. |
| 103 | S&F welded steel wire n exc 4 Kg/Sqm fabric supplied and fixed complete to wood or steel members complete all as specified and as directed. |
| 104 | M&L for mild steel framed work of angle, flat iron etc , for fixing wire mesh , and similar work, confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 105 | S&F Mild 11to 15 mm dia of neck of steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long long complete all as specified and as directed. |
| 106 | S&F in repair plain mild steel wire galvanised class 3 (dia of wire 4mm) in fencing/cloth line with pvc coated including straining and fixing to steel post and to straining bolts, including securing with and provision of galvanised iron tying wire or staples or steel pins etc including removing of old wire complete all as specified and directed. |
| 107 | S&F in repair for anchor fastener round close hook with screw eye to support the cloth wire of size 16x160 mm inserted into the brick wall, RCC columns and beams by drilling etc complte all as specified and directed. |
| 108 | M&L for preparing of surfaces of steel for painting of any description, over 10cm in width or girth, on new or previously unreated surface over a coat of primer of red oxide zinc and two coat of synthetic enamelled paint over it all as specified and as directed. |
| 109 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set with grey pigment cement and pigments, jointed and pointed in neat cement slurry in floors/steps including 15 mm thick screed bed of cement morter 1:4 complete including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. all as specified and directed. |
| 110 | M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping, cills etc including necessary use & waste of form work as required complete including Demolition of Concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 50m from site all as specified and directed |
| 111 | Demolition of brick work or stone masonry built in cement mortar, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 112 | M&L walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, ccomplete all as specified and as directed. |
| 113 | M&L walling of random rubble masonry (Except Stone), uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. Note:- Serviceable stone obtained from demolition shall be reused under this item. The rate quoted under this item is inclusive of cleaning of stone for reusing as required. |
| 114 | M&L flush pointing to random rubble masonary uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed. |
| 115 | M&L flush pointing to random rubble masonary uncoursed or brought upto courses in cement mortar 1:4 including raking out joints of old brick work or stone work built in cement mortar; not previously plastered; and scrubbing down with water etc. to receive plaster in repair work complete all as specified and as directed. |
| 116 | Demolition of Concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 50m from site complete all as specified and as directed. |
| 117 | M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping, cills etc including necessary use & waste of form work as required complete all as specified and directed |
| 118 | M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and as directed. |
| 119 | M&L precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in cover slab and similar other articles set in cement mortar 1:4 including necessary use and waste of form work complete all as specified and as directed. |
| 120 | M&L mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required, including cranking , bending spirally hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 121 | Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed . |
| 122 | M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified. |
| 123 | All as per here and before item No-122 above but for one light point controlled by one two way switch |
| 124 | All as per item No. 122 above but for call bell point. |
| 125 | All as per item No.122above but one 3 pin socket outlet 5 Amps on same board. |
| 126 | All as per item No. 122 above but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty. |
| 127 | All as per item No. 122 here in before but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductor and 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire. |
| 128 | Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement. |
| 129 | M&L Sub main wiring using four runs of FR grade PVC insulated ,unsheathed ,stranded, copper cable of size 6.0 Sqmm and two run of 6.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : four runs of 6.0 Sqmm copper wire,two run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit. |
| 130 | M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 2.5 Sqmm and one run of 2.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : Two runs of 2.5 Sqmm copper wire,one run of 2.5 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: . |
| 131 | M&L Sub main wiring using two runs of FR grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm FR grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: . |
| 132 | M&L Sub main wiring using two runs of FR grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and one run of 6.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : Two runs of 6.0 Sqmm copper wire,one run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit. |
| 133 | M&L Sub main wiring using four runs of FR grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 10 Sqmm and two run of 10 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : four runs of 10 Sqmm copper wire,two run of 10 Sqmm wire & one run PVC Conduit shall be measured as one unit. |
| 134 | S&F in replacement Switch piano, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. |
| 135 | S&F Switch piano, flush type, two pole, two way 5 Amps, 240V complete all as directed by Engineer-in-Charge. |
| 136 | S&F Bell push Switch, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. |
| 137 | S&F Call Bell ,Ding-Dong ,single pole, AC, 230 Volts complete all as directed by Engineer-in-Charge. |
| 138 | S&F in replacement Switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 Volt . |
| 139 | S&F Socket outlet 2 in 1, 5 pin, 5 Amps flush type 240 Volt . |
| 140 | S&F in replacement Switch socket combination 5/15 Amps flush type,6 pin,5 in 1. |
| 141 | S&F in replacement Ceiling rose,3 terminal PVC/poly carbonate isolated body. |
| 142 | Supply and fixing in replacement of Step type electronic Fan regulator socket type on the existing phonolic laminated sheet etc as required as existing type and size |
| 143 | Taking down old Unserviceable DB including fittings/fixtures with MCBs of any make and size all as specified and directed |
| 144 | S&F MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. |
| 145 | S&F MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified. |
| 146 | Supply and fixing Power line VTPN double door DB double door 04 way suitable for MCCB 63/100 amps sheet steel enclosure with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and including taking down old unserviceable DB's and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directe |
| 147 | S&F in replacement MCCB 4 pole, with fixed thermal & magnetic release of breaking capacity 25 kA, 415 Volts, 100 Amps. |
| 148 | S&F MCB, TP 25-63 Amps rating 240, volt, 'C' series, 10 Ka |
| 149 | S&F MCB, SPN 16 to 32 Amps rating 240, volt, 'C' series, 10 kA |
| 150 | S&F MCB, SPN 40 to 63 Amps rating 240, volt, 'C' series, 10 kA |
| 151 | S&F MCB in replacement SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA |
| 152 | S&F MCB, TPN 40-100 Amps rating 240, volt, 'C' series, 10 kA |
| 153 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed. |
| 154 | Supply and fixing High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. |
| 155 | Supply & fixing in repair Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 35/36 watt.including provn of necessary connection complete. |
| 156 | Supply and fixing in repair of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. |
| 157 | M&L Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised Iron Wire of size 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire |
| 158 | S&F in repairs Earth Continuity conductor or main earthing Lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situations for earthing etc. as required 4.0 mm dia galvanized iron wire . |
| 159 | Taking down carefully unserviseble Ceiling fan / Exhaust fan from points and kept carefully in MES store under custody of JE E/M complete all as specified & directed . |
| 160 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed . |
| 161 | Supply and fix energy efficient exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified & directed . |
| 162 | Suppy fix in repair stainless steel cable tray 50 mm size ladder 14 SWG perfoarated type hot dipped galvanised coating as specified |
| 163 | Supply and fix in replacement of Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified. |
| 164 | Taking up or down 25 mm dia steel tubing connections, including cleaning for re-fixing or removal to store |
| 165 | Taking up or down 40 mm /50 mm dia steel tubing connections, including cleaning for re-fixing or removal to store |
| 166 | Refixing old steel tubing 25 mm and connections in new or old position (Walls, ceiling,floors, etc. |
| 167 | Refixing old steel tubing 40 mm /50 mm and connections in new or old position (Walls, ceiling,floors, etc. |
| 168 | Supply and Laying GI water tubing ISI marked medium grade of 50mm bore follwong sizes including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accessories such as pipe hooks, screws, clamps etc in trenches or laid in floor including testing complete all as specified and as directed. |
| 169 | Supply and Laying GI water tubing ISI marked medium grade of 40mm bore follwong sizes including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accessories such as pipe hooks, screws, clamps etc in trenches or laid in floor including testing complete all as specified and as directed. |
| 170 | Supply and Laying GI water tubing ISI marked medium grade of 25 mm bore for fresh water follwong sizes including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accessories such as pipe hooks, screws, clamps etc in in trenches or laid in floor including testing complete all as specified and as directed. |
| 171 | Supply, fixing testing in repair 40 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to GI tubing complete all as specified and as directed. |
| 172 | Supply, fixing testing in repair 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to GI tubing complete all as specified and as directed. |
| 173 | Supply, fixing testing in repair 50 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to GI tubing complete all as specified and as directed. |
| 174 | M & L in repair for of brick masonry valve chamber 750x750x750mm inner dimension brick masonry in CM 1 :4 PCC base in 1:3:6 of 7.5 cm thick and plastering 15 cm thick in CM 1 : 4 in inner side/coping of all chamber fabrication of iron frame 40 x 40 x 6 mm size angle iron MS cover3 mm thick with hinges and locking arrangement duly painted including excavation earth work all complete all as specefied and directed. |
| 175 | Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth getting out of soil for taking out or laying of pipe line etc complete all as specified and directed for errection of bollard light complete all as specified and as directed. |
| 176 | Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified. |
| 177 | Removal of surplus soil to a distance n. exc 50 m above the starting point complete all as specified. |
| 178 | Supply and install testing and commissioning LT panel board CPRI approved outdoor floor mounted made out of 3.15 mm thick CRCA sheet front operated cubical type 3 phase, 4 wire AC 145 V complete with 50 x 50 x 6mm MS angle iron frame work, ventilated side lovuers, suitable aluminium links/ conductor from bus bars duly painted with two coasts of synthetic enamel powder coated paint over a coat of metal primer including voltmeter, Ammeter selector switches suitable to accommodation the following complete all as specified and directed: - |
| 179 | (a) 900 A copper bus bar for phases and neutral |
| 180 | (b) Multtifunction Meter with LED display with accessories 1 Nos |
| 181 | (c) Indicated lamps (set of three)-02 No. |
| 182 | (e ) MCCB 600 Amps,(with microprocessor release) 4 Pole with 36KA – 1 Nos(icu=ics=100ka) |
| 183 | (f) MCCB 4 pole – 250 Amps 36 KA breaking capacity (with microprocessor release) -03 Nos(icu=ics=100ka) |
| 184 | (f) MCCB 4 pole – 200 Amps 36 KA breaking capacity (with microprocessor release) -02 Nos(icu=ics=100ka) |
| 185 | (g) MCCB 4 pole – 100 Amps 35 KA breaking capacity(with microprocessor release)- 1 No. (icu=ics=100ka) |
| 186 | (g) MCCB 4 pole – 63 Amps 35 KA breaking capacity(with microprocessor release)- 1 No. (icu=ics=100ka) |
| 187 | (h) MCB SP 6 Amps capacity – 6 Nos |
| 188 | Supply and install testing and commissioning LT panel board CPRI approved indoor floor mounted made out of 2 mm thick CRCA sheet front operated cubical type 3 phase, 4 wire AC 145 V complete with 50 x 50 x 6mm MS angle iron frame work, ventilated side lovuers, suitable aluminium links/ conductor from bus bars duly painted with two coasts of synthetic enamel powder coated paint over a coat of metal primer including voltmeter, Ammeter selector switches suitable to accommodation the following complete all as specified and directed: - |
| 189 | (a) 400 A copper bus bar for phases and neutral |
| 190 | (b)Multtifunction Meter with LED display with accessories |
| 191 | (c) Set of indicating lamps (RYB)-02 set |
| 192 | (d) MCCB 4P 250A Microprocessor release breaking capacity 36 KA, breaking capacity - 1 No (Incoming)(ics as%icu) |
| 193 | (e) MCCB 3P 100A, Thermal and megnatic release adjustable type 36 KA breaking capacity - 5 No (04 outgoming & 1 no spare )(ics as%icu) |
| 194 | (f) MCB SP 6 Amps capacity – 3 Nos |
| 195 | Supply & laying of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core |
| 196 | M&L in repair Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, using galvanised iron strip 32×6mm as earthing lead (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing with Panel all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel complete all as specified and testing on completion. |
| 197 | Supply and fixing HDPE double wall pipe corugated pipe of size 110 mm outer dia incliding coupler for cable protection laid in trenches in lieu of sand/brick protection complete all as specified and directed. |
| 198 | Supply and fixing of GI tubing light grade of 50 mm dia for cable protection on pole/wall/floor etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc all as specified and directed, |
| 199 | Taking down carefully burnt and unserviceable UG cable any size and any capacity from trench, wall, floor,surface and pipe all as specifeed and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender