Tender For special Repair To Bldg No T-03, T-11, T-14 & T-156 Of 19 Bihar & Provn Of 03 Phase Electricity Connection For Under Ground Comn Node Of 136 (I) Inf Bde Gp Sig Coy At Pooh And Khab Under Ge 863 Ews.
Tender Value
38.08 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
76160
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-03, T-11, T-14 & T-156 Of 19 Bihar & Provn Of 03 Phase Electricity Connection For Under Ground Comn Node Of 136 (I) Inf Bde Gp Sig Coy At Pooh And Khab Under Ge 863 Ews.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets. |
| 2 | Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work. |
| 3 | -Ditto- all as per item above but in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section. |
| 4 | M & L for second class hardwood clean sawn scantlings as in timber framed and fixed complete all as specified and directed. |
| 5 | M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 & n.exc 6 sq.cm complete all as specified and directed. |
| 6 | M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 & n.exc 25 sq.cm complete all as specified and directed. |
| 7 | M & L for 6mm thick (No of ply 5) plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and directed. |
| 8 | M & L for preparation of wood and wood based materials, new or old surfaces any description not otherwise described and exc 10cm width or girth and applying two coats of creosote oil all as specified and directed. |
| 9 | M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 10 | Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames). |
| 11 | Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames). |
| 12 | S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 13 | S & F of 35 mm thick (Batten thickness) 2nd class hardwood plain, framed panelled shutters (any numbers of panels0 with panels of timber flat on both sides (feather edged) or od veneered particle board of medium density , wood particle board with commercial face veneers and fitted to chaukhats complete all as specified and directed. |
| 14 | S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed. |
| 15 | S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed. |
| 16 | S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165. |
| 17 | M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks. |
| 18 | S & F 125mm butt hinges, medium weight, cold rolled mild steel and fixed. |
| 19 | -Ditto- all as per item above but 75mm long. |
| 20 | S & F 300mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 21 | S & F 150mm Aluminium handles, cast type, anodised |
| 22 | S & F 125mm Aluminium handles, cast type, anodised |
| 23 | S & F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 24 | S & F 125mm aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 25 | S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete. |
| 26 | M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane. |
| 27 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 29 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 30 | M &L 75mm thick cement concrete type C2 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth wuthout using extra cement a in plinth protection all as specified and directed. |
| 31 | M &L 75mm thick cement concrete type D2 1:4:8 in sub base floor complete all as specified and directed. |
| 32 | M &L chequered cement concrete tile 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry over 20mm thick scrred bed in cement mortar 1 :4 as in floors with grey cement and pigment complete all as specified and directed. |
| 33 | M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:6. |
| 34 | M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in cement mortar 1:4. |
| 35 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed. |
| 36 | M &L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 37 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc. |
| 38 | M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement). |
| 39 | M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 and finished even and smooth (without using extra cement). |
| 40 | M & L for complete removal of existing treatment and applying 3mm thick Birla wall care putty and applying two coats of distemper oil emulsion over a coat of primer on wall complete all as specified and directed. |
| 41 | M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 42 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass , mounted on 6mm thick AC building board or commerical plywood and fixed to wodden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed by engr-in-charge. |
| 43 | S&F in 20 mm dia ,Al alloy curtain rails with brackets fixed in repair. |
| 44 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed by Engr-in-Charge |
| 45 | Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface all as directed at site. |
| 46 | Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed by Engineer-in-Charge |
| 47 | Matrial & Labour for point wiring using approved colour coding as per IS with using approved coper coding as per IS 1.5 Sqmm multistranded , 1100 volt grade copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point / fan / Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 48 | All as per Srl item No 47 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 49 | All as per Srl item No 47 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with cable 1.5sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge. |
| 50 | All as per Srl item No 47 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5sqmm including provision of 2.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge. |
| 51 | Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 52 | Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. |
| 53 | Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 54 | Supply and fixing of Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 55 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. |
| 56 | Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings. Make : Anchor/leader/havells |
| 57 | Supply and fixing recessed mounting 36 W 3000K 2x2 panel luminaire with high performance LEDs suitable for mounting with Grid ceiling Slim square incl driver complete fitting , all as specified and directed by Engr-in-Charge. Make: Crompton / Havells / Wipro |
| 58 | Supply and fix in replacement LED Batten 20W , 4 ft (Approx) length ultra slim square profile with extruded polycabonate, enviromenental friendly, energy efficient , connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed. Make- Havells / Philips / Crompton |
| 59 | Supply and fixing 9 watts LED backup lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode all as specified and directed by Engg-in-Charge. Make: Havells |
| 60 | Supply & Fixing bulk head light with 10 W LED Lamp complete. Make Crompton Cat No LBHP-10-CDL or equivalent in Philips/wipro/Havells |
| 61 | Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and directed by Engineer-in-Charge |
| 62 | Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 6 to 32 Amp |
| 63 | Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (ii) SPN 32 to 63 AMP |
| 64 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 16 sqmm two core aluminium solid conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular all as specified and directed. |
| 65 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 10 sqmm two core aluminium solid conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular all as specified and directed. |
| 66 | Supply and fixing House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. Grade), with two nos of suitable size of clamp,nuts, bolts and wahers etc fixed to GI sheet roof complete all as specified and directed. |
| 67 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing on completions. |
| 68 | Supplying, laying, jointing & testing of cable XLPE insulated as per IS 7098 (Part-I)-1988, marked, screened, PVC sheathed armoured electric power cable ( heavy duty) with aluminium conductor for working voltage upto and including 1100 Volts croos sectional area 95 Sqmm 3.5 core with aluminium stranded, laid in trenches / fixed on pole / wall / passed through pipe complete all as specified and directed by Engineer - in - Charge. |
| 69 | All as per item No 68 above but 50 Sqmm 3.5 core |
| 70 | All as per item No 68 above but 25 Sqmm 4 core |
| 71 | All as per item No 68 above but 16 Sqmm 4 core |
| 72 | All as per item No 68 above but 10 Sqmm 4 core |
| 73 | Supply, install, testing and commissioning LT cubical Panel of outdoor type factory made dust/vermin proof made out of CRCA sheet 3.15 mm thick CPRI approved duly powder coated having opening and locking arrangement both in front and rear side(independent door for each item on front side) mounted on 4 Nos angle iron 50x50x6 mm, 45 cm long embedded in PCC 1:3:6 type C2 complete with copper bus bar of rating 1.5 times the rated capacity of incomer, IP 65 protection, and conforming to end tested for IEC 61439 standards suitable cable gland for incomming and outgoing cables with lugs and connections etc required nuts ,bolts and washer incl complete control wiring with suitable size PVC copper conductor cable and provn of cable lugs etc. Including provision of following accessories/eqpt incl cable gland etc and suitable for fixing of under mentioned items:- Note : All incoming and outgoing feeders shall be connected by cable through suitable size of gland plate/glands.(ii) The outgoing feeder shall be indicated by 50mm size letters in synthetic enamel white paint. |
| 74 | LT Panel Incommer(a) MCCB Adjustable thermal and Adjustable magnetic 4Pole 125 A 25 KA, ics=100% icu -No.01 (b) Digital Voltage meter with in built selector switch -01 No(c) Digital Ammeter 0 to 500 Amps with CTs and selector switch - 01 set(d) LED Phase Indication lamp (RYB) -01 SetOutgoing(a) MCCB Adjustable thermal and Adjustable magnetic 4Pole 100 A 25 KA, ics=100% icu -No.01 (b) MCB TPN 40-63 Amp - 03 Nos (c) Spare space for MCCB -01 Nos |
| 75 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick not less than (weight) 17.5 kg buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, check nuts and washers of galvanization of steel protected by GI pipe 15mm bore (light Grade) and watering pipe 20mm bore GI pipe Light Grade and chamber of PCC 1:4:8 type D2 using 40mm grade stone aggregate and coping shall be in PCC 1:3:6 type C1 with in 20mm graded stone aggregate 50mm thick cover of RCC 1:2:4 type B1 within 20mm graded stone aggregated reinforced with 8 mm dia MS bar @ 80mm c/c both ways incl excavation and Earth work and removal of surplus soil complete all as shown in electrical plate No 3 of SSR Part - I , 2009 with charcoal dust and salt complete and earth lead connected to earthing test point upto (to main switches, DBs) complete all as specified and testing on complition. Note:- (i) Item incl the cost of 7.5mtr length GI Pipe for protection for GI earth Wire .(ii) Item rates includes the cost of 7.5 mtr earth lead GI earth wire.(iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and extra cost of additional length of watering pipe, bends, elbow etc shall be deemed including in the unit rate. |
| 76 | Excavation in trenches soft / hard soil not exc 1.5 Mtr wide and not exc 1.5 Mtr in depth in any type of soil for laying underground cables / erection of steel tubular poles / stay pit etc all as specified and directed by Engineer - in - Charge. |
| 77 | Returning, filling in incl spreading ,levelling watering and well ramming in layer n exc 25cm in soil each layer complete all as specified and directed by Engineer - in - Charge. |
| 78 | Removing excavated surplus material to a distance n exc 50m and depositing where directed at level n. exc 1.5m above the starting point in any type of soil complete all as specified and directed by Engineer - in - Charge. |
| 79 | Material & Labour for sand cushioning the UG cable screened unwashed river sand and punning for cushioning to cable all as speicified and directed by Engineer - in - Charge. |
| 80 | Material & Labour for laying dry bricks old size with sub class 'B' made of burnt clay best quality locally available with permissible tolerance , laid straight in trench for protection of cable all as specified and directed by Engineer - in - Charge. |
| 81 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender