Tender For Restoration Work Of Road Cutting At Various Places Of North Zone ,Ajmer
Tender Value
1.22 Crore
Estimated cost
Bid Submission
06 Aug 2026
5 days left
EMD
2.44 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ajmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Work Of Road Cutting At Various Places Of North Zone ,Ajmer
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202 By Mechanical Means,Bituminous Courses & Granular Courses |
| 2 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3 |
| 3 | Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on aprepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means For Grading-VI Material |
| 4 | Providing, laying, spreading and compacting graded stone aggregate to wetmix macadam specification including premixing the material with water atOMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper tosite, laying in uniform layers in sub-base/base course on a well preparedsub-base and compacting with smooth wheel roller of 80 to 100kN weight toachieve the desired density including lighting, barricading and maintenanceof diversion, etc as per Tables 400-12 & 400-13 and MoRTH SpecificationClause 406. Clause 406) by mechanical means with all lead |
| 5 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning ofroad surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 6 | Providing and applying tack coat with Bitumen VG-10 using bitumenpressure distributor at the rate of 0.35 to 0.45 kg per sqm on theprepared granular surfaces treated with primer & cleaned withHydraulic broom as per MoRTH Specification Clause 503 and IRC-16-2008.Tack Coat using Bitumen (VG-10) |
| 7 | Providing and laying dense graded bituminous macadam with100-120 TPH batch type HMP producing an average output of75 tones per hour using crushed aggregates of specifiedgrading, premixed with bituminous binder @ 4.0 to 4.5 percentby weight of total mix and filler, transporting the hot mix to worksite, laying with a hydrostatic paver finisher with sensor control tothe required grade, level and alignment, rolling with smoothwheeled, vibratory and tandem rollers to achieve the desiredcompaction as per MoRTH Specifications Clause 505 completein all respects. Bitumen (VG-30)Grading - I (37.50mm (Nominal Size)) |
| 8 | Providing and laying bituminous concrete with 100-120 TPHbatch type hot mix plant producing an average output of 75tonnes per hour using crushed aggregates of specified grading,premixed with bituminous binder @ 5.4 to 5.6 per cent of mixand filler, transporting the hot mix to work site, laying with ahydrostatic paver finisher with sensor control to the requiredgrade, level and alignment, rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compactionas per MoRTH Specifications Clause 507 complete in allrespects for Grading-I ( 19 mm nominal size ) Bitumen CRMB 60 |
| 9 | Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2 |
| 10 | Marking Centre Line and stop lines etc. on road as per IRC pattern withthermoplastic paint of approved quality and make with 8% glass beads laidon the road surface at temperature 160\\" C with a special applicator machinecomplete with a special applicator machine complete with labour materialand traffic diversion arrangements. |
| 11 | Providing concrete for plain/reinforced concrete in open foundationscomplete as per drawings and MoRTH specifications Clause 1702, 1703,2102 & 2104P.C.C grade M 10 Nominal mix 1:3:6 |
| 12 | Supply of readymade cold bituminous mixture for pothole patching in potholes in accordance with IRC:116-2014 specifications with IRC: 116-2014 spccifications with 5.6% MC- 800 Cut back Bitumen and suitable anti stripping agent with all lead and lift in 50 kg plastic lined sturdy bags complete in all respect as per direction of engincer-in- charge including all transportation, stacking & taxes etc |
| 13 | Placing and compacting readymade cold bituminous mixture in potholes duly prepared in accordance with IRC:116-2014 with Specifications with all lead and lift for placement at site complete in all respect as per Direction of Engineer-in-charge including all taxes etc. |
| 14 | Providing and laying Built up spray grout ( BUSG ) patching 75mm thick in two layers ( Each layer consisting of spreading aggreate - crusher broken @ 0.50 cum per 10 sqm area as per MoRTH specification, laying first layer after application of tack coat @ 3.75 kg per 10 sqm including cost of tack coat, rolling with 8-10 tonne power road roller, application of first spray of binder @ 15 kg per 10 sqm, spreading & rolling of second layer of coarse aggregate with 8-10 tonne power road roller, application of second spray of binder @ 15 kg per 10 sqm and laying key aggregate on the top of second layer and rolling with 8- 10 tonne power road roller including heating and spraying of binder, cleaning the area of patch, potholes cut to regular shape with vertical sides, removing all loose and disintegrated material including cost of coarse aggregate, key aggregate, rolling & hire charges of machinery, T&P, cost of fuel, bitumen etc. complete. |
| 15 | Cement Concrete Pavement Construction of un-reinforced , plain cement concrete pavement M30(Grade), thickness as per design, over a prepared sub base, with 43/53grade cement as per Clause 602.2.2 , coarse and fine aggregatesconforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a in fully automatic Batching Plant and transported to site intransit mixer for having continous agitated mixer, manufactured as perapproved mix design including pumping of R.M.C. from transit mixer to siteof laying , with all lead and lift including cost of admixtures in recommendedportion as per IS 9103 to accelerate/ retard setting of concrete, improveworkability without impairing strength and durability as per direction ofEngineer in charge laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film, wedges, steel platesincluding levelling the formwork as per drawing), spreading the concrete withshovels, rakes, compacted using Fixed Form Paver and finished incontinuous operation including provision of contraction and expansion,construction joints, applying debonding strips, primer, sealant nearapproaches to bridge/culvert and construction joints, admixtures asapproved, curing of concrete slabs for 14-days using water finishing to linesand grade as per drawing and MoRTH Specification Clause 602 includingvaccum dewatering process with all required equipments (Dowel Bars will bepaid seprately). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender