Tender For Repairing Of Twin Hull Type Steel Barge At Kismat Sultanpur-Ii Govt. Owned And Operated Major Rli Scheme At Gazole Block Under Gazole (A-M) Sub-Division Under Malda-I (A-M) Division Under Non-Plan Maintenance.
Tender Value
4.13 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
8 days left
EMD
8273
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Maldah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Twin Hull Type Steel Barge At Kismat Sultanpur-Ii Govt. Owned And Operated Major Rli Scheme At Gazole Block Under Gazole (A-M) Sub-Division Under Malda-I (A-M) Division Under Non-Plan Maintenance.
BOQ
| Sl. No. | Item Description |
| 1 | Works:- |
| 2 | Removing the pump sets installed on the barge from the foundation including disconnection & removal of suction & delivery assemblies from the barge to a secured place and re-fitting the same properly after the maintainence of the barge. |
| 3 | Opening, strengthening & refitting of plates, angles. purlines, trusses, bolllard, expanded metal/ BRC net winch etc. as required and as per direction of the E.I.C. |
| 4 | Acid treatment and removing rust corrosion etc. from the surface both inside and outside of hulls keels deck of the steel barge throughly as direction of the EIC |
| 5 | Chipping, scraping wire brushing & cleaning of the painted surface for keel, hull, frame, superstructure deck, fender both inside and outside as per direction of the EIC |
| 6 | Patch/ doubling work complete with 5 mm thk M.S. plate including welding, gas cutting, fitting, fixing complete.(a) Cost of 5 mm thk M.S. plate including wastage due to cutting, labour charge for straighting, fitting fixing in position |
| 7 | (b) Gas cutting to required size of 8 mm thk M.S. plate, N.S>C. channel etc. including labour charges , higher charges of all tools and plants |
| 8 | (c) Electric welding charge for 5 mm thk M.S. plate, M.S> channels etc. and other member of the barge including hire charges of all tools and plants |
| 9 | M.S. structuarl work in roof trusses etc with the following rolled structural members viz. angle, flat, bars etc. weighing less then 22 kg./ m connection to one another with brackets, cleats, bolts & nuts etc. as per design and direction complete including febrication hoisting & erection.(a) Suppling, fitting & fixing of M.S. angle for post rafter purloin etc and for joining the two hulls at both ends including gas cutting etc.(i) 45 mm x 45 mm x 6 mm |
| 10 | (b) Suppling, fitting & fixing of M.S. flat bar including gas cutting etc.(i) 40 mm x 6 mm for straightening of B.R.C. net etc. including gas cutting |
| 11 | Supplying fitting fixing of 25 mm. GI pipe for the tie rod of barge. |
| 12 | Supplying fitting fixing of 75 mm (NB) MS pipe including gas cutting and welding as fender of barge |
| 13 | Suppling, fitting and fixing of different size of bolt and nuts with washer for fixing door (10 to 16 mm dia) upto 75 mm length |
| 14 | Suppling, fitting fixing 10 cm oxidized hinge (100 mm x 58 mm x 1.9 mm) for fixing door including the cost of welding. |
| 15 | Suppling, fitting fixing iron hasp bolt of approved quality (oxidized) & socket on the doors including the cost of welding. The bolt would be 30 cm. long and dia of bolt not less than 18 mm. |
| 16 | Suppling, fitting fixing of I.R.C. net (75 mm x 25 mm x 10 swg) with nuts and bolts of the barge including gas cutting etc. |
| 17 | Suppling, fitting fixing complete with fastener :-Galvanized corrugated iron sheet work (including the supporting frame work) fitted and fixed with 10 mm dia \\"J\\" or \\"L\\" hook-bolts, limpet and bitumen washers and putty complete with 150 mm end lap and one corrugation minimum side lap with 0.63 mm thk sheet in roof |
| 18 | G.I. sheet ridging fitted and fixed with necessary bolts and nuts sctews, washers etc. complete with 0.60 mm sheets. |
| 19 | (a) Primming one cote on steel or other metal surface with synthetic enamel /oil bound primer of approved quality including smoothening surface by sand paper etc. |
| 20 | (b) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc, if necessary(i) Two coat (with any shade except white) |
| 21 | Painting with Coal Tar Epoxy Paint Two Coat of approved brand (Minimum Dry Film Thickness (DFT) 200 Micron) at all location prepared and applied as per manufacturess specification on Steel Surface |
| 22 | Leak proof testing of repaired hull if floating condition on river water with proper endurance test as required for minimum perion of 48 hrs. complete as per direction of the E.I.C. |
| 23 | Transportation charge for carrying of all the materials working devices etc. upto the scheme and back. |
| 24 | DEDUCTION:- |
| 25 | Deduction towards scrapped MS Plate, MS Sheet, MS Fitting (MS Angle, Bar & channel), MS Rod, GCI Sheet, IRC/BRC Net etc from Barge on the basis of actual measurement to be retained by the agency for disposal . This item includes weighting, handling, carriage, loading, unloading, stacking etc of scrapped materials from RLI Sites. (Inclduding of all labour charges), Convenient weighing arrangement at the RLI Sites would be made by the agency at his own cost. |
| 26 | Add GST 18% |
| 27 | Add Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender